Heath Zenith SL-4290 Series - Manual
Heath Zenith SL-4290 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; • Wire strippers/cutters; WARNING: Turn power off at circuit; Dimmer Control; Flip light switch
- Page 3 – WIRING; CAUTION: DO NOT connect the RED
- Page 4 – OPTIONAL WIRING; If the dual master wiring is not
- Page 5 – COMPLETE THE; Note: Sensor has a 1
- Page 6 – SPECIFICATIONS; Rotating Sensor Head to Change; BULB REPLACEMENT
- Page 7 – TROUBLESHOOTING GUIDE; TECHNICAL SERvICE; returning product to store.; No Service Parts Available for this Product
- Page 8 – FIvE YEAR LIMITED WARRANTY
- Page 9 – FUNCIONAMIENTO; PRUEBA; MODO MANUAL; Nota: Cuando lo prenda por primera vez es-; Farol D; de; Características
- Page 10 – Luz de Adorno; Resumen de las modalidades del; INSTALACION
- Page 11 – CABLEADO; CUIDADO: NO conecte el cable ROJO
- Page 12 – La conexión; CONEXION ALTERNA
- Page 13 – Alcance Máximo; Evite apuntar el control hacia:; Lo menos sensible; INSTALACIÓN DEL BRAZO; Nota: El detector tiene un período de cerca
- Page 14 – ESPECIFICACIONES; Giro de la cabeza del detector para; REEMPLAZO DE LA
- Page 15 – GUIA DE INvESTIGACION DE AvERIAS; SERvICIO TÉCNICO; antes de devolver el producto a la tienda.
- Page 16 – GARANTÍA LIMITADA A 5 AÑOS; Por favor guarde su recibo de venta
- Page 17 – FONCTIONNEMENT; Note: Après mise en circuit, attendre enfiron; ESSAI; détecteur de mouvement; Caractéristiques; Contenu de l’emballage
- Page 18 – Minuterie D; Résumé du mode de commutation; * Si vous ne savez plus dans quel mode; M I S E E N G A R D E : C o u p e z
- Page 19 – CÂBLAGE; Méthode de mise à la terre recommandée; Torsadez ensemble les fils de la boîte
- Page 20 – CÂBLAGE FACULTATIF
- Page 21 – COMPLÉTEZ; Le moins sensible; INSTALLATION DU BRAS; ESSAIS; Note : Le capteur doit se réchauffer 1
- Page 22 – FICHE TECHNIQUE; Rotation du capteur pour modifier la; REMPLACEMENT DE
- Page 23 – GUIDE DE DÉPANNAGE; l’aide avant de retourner l’article au magasin.; Aucune pièce de rechange n’est disponible pour ce produit.
- Page 24 – GARANTIE LIMITÉE DE 5 ANS; veuillez conserver le reçu portant la date
D
ual
B
rite
®
Motion
Sensing Diecast
Lantern
© 2008 HeathCo LLC
598-1277-02
OPERATION
* resets to Auto Mode at dawn.
Set the ON-TIME switch
on the bottom of the cover
plate to
TEST.
TEST 1 5 10 MIN
Set ON-TIME switch to
1, 5, or 10 minutes.
1 Second
OFF then...
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
... back on.
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
TEST
AUTO
MANUAL MODE
TEST
1 5 10 MIN
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Accent
3,6 Hr. to Dawn
x
Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.
Questions or problems? Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
hours.
Package Contents
• Lantern
• Universal Mounting Bracket
• Mounting Screws (Includes extra long screw
studs for recessed junction box mounting)
• Wire Connectors
Requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
•
Some electrical codes require installa-
tion by a qualified electrician.
ON-TIME
ON-TIME
SL-4290 Series
Meets the ENERGY STAR
®
guidelines when
D
ual
B
rite
®
function is off.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1277-02 INSTALLATION Estimated Installation Time: 30 minutesItems needed for installation (not included):• Phillips and flathead screwdrivers• Pliers • Wire strippers/cutters • Safety glasses • Light bulb• Silicone caulkFor best performance, mount the fixture about 6 feet (1.8 m) above the gro...
3 598-1277-02 WIRING One Motion Light ❒ Twist the junction box wires and the fixture wires together as shown below. Secure with wire connectors. If you have a metal junction box, you may not need the green “pigtail”. If you are unsure about the grounding method, consult your local building code. Two...
4 598-1277-02 OPTIONAL WIRING This fixture is provided with a sensor rated for 360 Watts. Since the fixture is only rated 100 Watts, 260 Watts of additional load may be controlled by this sensor.When determining what a fixture is rated for, do not simply look at the rating on the lamp in the fixture...
