Heath Zenith SH-5597 - Manual
Heath Zenith SH-5597 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Bulb Installation and Replacement; turn power off; Mode Switching Summary; MANUAL MODE; INSTALLATION; Timer
- Page 3 – White
- Page 4 – Motion; Bottom of Sensor; Least Sensitive; TEST AND ADJUSTMENT
- Page 5 – SPECIFICATIONS; TROUBLESHOOTING GUIDE
- Page 6 – No Service Parts Available for this Product
- Page 7 – Características; FUNCIONAMIENTO; Prueba
- Page 8 – Resumen de las modalidades del interruptor; PRUEBA; INSTALACION; CUIDADO: Para evitar los peligros de incen-; Instalación y Cambio de la Bombilla; apague la energía; Luz de Adorno
- Page 9 – ADvERTENCIA: Desconecte la energía en el; Instale el Control de Luz; Negro
- Page 10 – Parte de abajo del detector; Lo menos sensible; PRUEBA Y AJUSTE
- Page 11 – ESPECIFICACIONES; GUIA DE INvESTIGACION DE AvERIAS
- Page 12 – de devolver el producto a la tienda.
- Page 13 – Exigences; FONCTIONNEMENT; Caractéristiques; Contenu de l’emballage; MD; à détecteur
- Page 14 – Résumé du mode de commutation; Installation et Remplacement de la; Minuterie D
- Page 15 – Montage de la Commande D’éclairage
- Page 16 – Bas du détecteur; Le moins sensible; ESSAIS ET RÉGLAGES
- Page 17 – FICHE TECHNIQUE; GUIDE DE DÉPANNAGE
- Page 18 – GARANTIE LIMITÉE DE DIX ANS; Exclusions de la garantie -; SERvICE TECHNIQUE; avant de retourner l’article au magasin.; Aucune pièce de rechange n’est disponible pour ce produit.
© 2008 HeathCo LLC
598-1162-02
D
ual
B
rite
®
Motion
Sensor Light Control
2 Wire
Connectors
Gasket
6 Screws
(3 sizes included)
Light Control
Mounting Strap
Mounting Bolt
2 Bulbs
(installed)
Rubber Plug
Plastic Hanger
Cover
Plate
Sensor
Bulb Holders
Features
• D
ual
Z
one
™ Technology.
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Bulb Saver™ - Extends bulb life by up to 4x standard
bulbs. Lights bulb to full bright in under 2 seconds.
• D
ual
B
rite
®
Timer.
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).
Package Contents
Requirements
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
•
Some codes require installation by a qualified
electrician.
• This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
OPERATION
* resets to Auto Mode at dawn.
TEST
TEST
1 5 20
ON-TIME
Off
3 6 Dusk to
Dawn
D
ual
B
rite
®
Put ON-TIME switch
on the sensor bottom
to TEST and the D
ual
-
B
rite
®
switch OFF.
MANUAL MODE
ON-TIME
TEST
1 5 20
... back on.
AUTO
1 Second OFF
then...
Note:
When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.
Put the ON-TIME switch in the 1, 5,
or 20 minute position.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 20 Min
x
Manual
To Dawn*
x
Accent
3, 6 Hr, to Dawn
x
Meets the ENERGY STAR
®
guidelines
when D
ual
B
rite
®
function is off and
ON-TIME is 1 or 5 minutes.
Model SH-5597
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1162-02 For easy installation, select an existing light with a wall switch for replacement.For best performance, mount the fixture about 8 ft. (2.4 m) above the ground. NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance. ❒ Swing the sens...
3 598-1162-02 Keep bulbs at least 2" (51 mm) from the sen- sor and 2" (51 mm) from combustibles. Lock Nuts Mount the Light Control ❒ Place the mounting bolt through the front of the junction box cover. Push the small gasket hole over the mounting screw. ❒ Make sure the wire connectors and wi...
4 598-1162-02 Maximum Maximum Range Coverage Angle MAX MIN RANGE ON-TIME DUAL BRITE™ TEST 1 5 20 MINUTES OFF 3 6 DUSK TO DAWN HOUR BO O S T Motion Motion 8 ft. (2.4 m) 70 ft. 100 ft. (21 m) (30.5 m) Boosted Sensor 240° D ual Z one ™ D ual Z one ™ D ual Z one ™ D ual Z one ™ Bottom of Sensor Avoid ai...
