Heath Zenith SH-5316 - Manual
Heath Zenith SH-5316 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION
- Page 3 – SPECIFICATIONS; Maximum; TEST AND ADJUSTMENT
- Page 4 – TROUBLESHOOTING GUIDE
- Page 5 – TEN YEAR LIMITED WARRANTY; TECHNICAL SERvICE; No Service Parts Available for this Product
- Page 6 – Repuesto D; Para el; Características; FUNCIONAMIENTO
- Page 7 – Resumen de las modalidades del interruptor; PRUEBA; Luz de Adorno; INSTALACION
- Page 8 – Conecte el Control de Luz; PRUEBA Y AJUSTE
- Page 10 – ESPECIFICACIONES; GUIA DE INvESTIGACION DE AvERIAS
- Page 11 – GARANTÍA LIMITADA A 10 AÑOS; SERvICIO TÉCNICO; de devolver el producto a la tienda.
- Page 12 – FONCTIONNEMENT; Caractéristiques; Exigences
- Page 13 – Minuterie D; Résumé du mode de commutation
- Page 14 – Portée maximale; Bas du détecteur; ESSAIS ET RÉGLAGES
- Page 15 – FICHE TECHNIQUE
- Page 16 – GUIDE DE DÉPANNAGE
- Page 17 – GARANTIE LIMITÉE DE DIX ANS; SERvICE TECHNIQUE; avant de retourner l’article au magasin.; Aucune pièce de rechange n’est disponible pour ce produit.
Features
• D
ual
Z
one
™ Technology.
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Bulb Saver™ - Extends bulb life by up to 4x standard
bulbs. Lights bulb to full bright in under 2 seconds.
• Patented D
ual
B
rite
®
Timer.
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).
Requirements
• Not for use with fluorescent lights.
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
•
Install sensor in accordance with local codes.
© 2008 HeathCo LLC
598-1153-02
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
TEST
TEST
1 5 20
ON-TIME
Off
3 6 Dusk to
Dawn
Put ON-TIME switch
on the sensor bottom
to TEST and the D
ual
-
B
rite
®
switch OFF.
D
ual
B
rite
®
Timer
Light comes on half bright for selected time after dusk
(Off, 3 hr., 6 hr., until dawn). Selecting OFF disables
this feature. The motion sensing features will continue
to work as described in this manual. If motion is sensed,
the light turns on full bright for the ON-TIME (1, 5, or 20
minutes) then returns to dim mode.
MANUAL MODE
ON-TIME
TEST
1 5 20
... back on.
AUTO
1 Second OFF
then...
Move ON-TIME Switch to
1, 5, or 20 minutes
Mode Switching Summary
Flip light switch off
for one second then
back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.
Put the ON-TIME switch in the 1, 5,
or 20 minute position.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 20 Min
x
Manual
To Dawn*
x
Accent
3, 6 Hr, to Dawn
x
D
ual
B
rite
®
Replacement
Sensor Head
D
ual
B
rite
®
Model SH-5316
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1153-02 Wire the Light Control Junction Box Mount the Light ❒ Follow the instructions that came with your light fixture for mounting and adjusting the light fixture. ❒ Keep regular PAR-38 bulbs at least 1" (25 mm) from the sensor. Halogen bulbs should be kept at least 2" (51 mm) from t...
3 598-1153-02 SPECIFICATIONS Horizontal Range . . . . Up to 70 ft. (21 m); 100 ft. (30.5 m) with Range Boost. [ v a r i e s w i t h s u r r o u n d i n g temperature] Vertical Range . . . . . . Up to 15 ft. (4.6 m)Sensing Angle . . . . . . Up to 240° horizontal. Up to 80° Vertical Electrical Load . ...
4 598-1153-02 POSSIBLE CAUSE 1. A bulb is positioned too close to the sensor or pointed at nearby objects that cause heat to trigger the sensor. (Reposition the bulb away from the sensor or nearby objects). 2. Sensor is pointed toward a heat source like an air vent, dryer vent, or brightly-painted h...
