Heath Zenith BL-1100 - Manual

Heath Zenith BL-1100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – INSTALLATION; Wall Mount
Page 3 – Bottom of Sensor; TEST AND ADJUSTMENT; SPECIFICATIONS
Page 4 – TROUBLESHOOTING GUIDE; TWO YEAR LIMITED WARRANTY; TECHNICAL SERvICE; No Service Parts Available for this Product
Page 5 – Requisitos; Características; FUNCIONAMIENTO; Resumen de las modalidades del; PRUEBA
Page 6 – INSTALACION; CONECTE EL CONTROL DE LUZ; INSTALE EL CONTROL DE LUZ; Montaje en pared
Page 7 – PRUEBA Y AJUSTE; ESPECIFICACIONES
Page 8 – GUIA DE INvESTIGACION DE AvERIAS; SERvICIO TÉCNICO; de devolver el producto a la tienda.; No hay piezas de servicio disponibles para este producto.
Page 9 – FONCTIONNEMENT; Résumé du mode de commutation
Page 12 – GUIDE DE DÉPANNAGE; SERvICE TECHNIQUE; avant de retourner l’article au magasin.; Aucune pièce de rechange n’est disponible pour ce produit.

Loading the manual

598-1320-01

Motion Sensor Light
Control

Model BL-1100

Features

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.

Requirements

• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be

wired through a switch.

•

Some codes require installation by a qualified
electrician.

• This product is intended for use with a junction box

marked for use in wet locations.

• The backplate has knockouts so the sensor can be

mounted on most junction boxes.

• In some applications a universal adaptor plate may

be needed. Adaptors are available at home centers
and electrical supply stores.

Cover

Plate

Light Control

Lamp Holders

Sensor

2 Wire

Connectors

Gasket

4 Mounting

Screws (2 sizes)

This package includes:

OPERATION

* resets to Auto Mode at dawn.

Note:

When first turned on wait about 1

minutes for

the circuitry to calibrate.

MANUAL MODE

ON-TIME

TEST

TEST

ON-TIME

TEST

... back on.

AUTO

1 Second OFF

then...

Put the ON-TIME switch in the 10
minute position.

Put the ON-TIME switch on the bottom
of the sensor in the TEST position.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the ON-
TIME switch in the 10 position.

Move ON-TIME Switch to

10 minutes

Mode Switching Summary

Flip light switch off

for one second then

back on*

MANUAL MODE

AUTO

TEST

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

As an ENERGY STAR

Partner, Heath

/Zenith

has determined that this product meets the EN-
ERGY STAR

guidelines for energy efficiency.

This product is ENERGY STAR

compliant

when used with 120 Watt bulbs.

Mode:

On-Time

Works:

Day Night

Test

5 Seconds

Auto

10 Min

Manual

Until Dawn*

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INSTALLATION; Wall Mount

2 598-1320-01 INSTALLATION For easy installation, select an existing light operated by a wall switch for replacement.For best performance, mount the fixture about 8 feet (2.4 m) above the ground. W ire the L ight C ontroL For eave mount only: Wall Mount Eave Mount For under eave installation, the se...

Page 3 - Bottom of Sensor; TEST AND ADJUSTMENT; SPECIFICATIONS

3 598-1320-01 Bottom of Sensor ON-TIME 10 TEST TEST AND ADJUSTMENT NOTE: Sensor has a 1 1 / 2 minute warm up period before it will detect motion. When first turned on, wait 1 1 / 2 minutes. ❒ Turn on the circuit breaker and light switch. ❒ Set the ON-TIME control to the TEST position. Motion Motion ...

Page 4 - TROUBLESHOOTING GUIDE; TWO YEAR LIMITED WARRANTY; TECHNICAL SERvICE; No Service Parts Available for this Product

4 598-1320-01 SYMPTOM Lights will not come on. L i g h t s c o m e o n in daylight. L i g h t s c o m e o n f o r n o a p p a r e n t reason. POSSIBLE CAUSE 1. Light switch is turned off. 2. F l o o d l i g h t i s l o o s e o r burned out. 3. Fuse is blown or circuit breaker is turned off. 4. Dayli...