Heath Zenith 6280 - Manual
Heath Zenith 6280 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Back
- Page 3 – Code and Tune Settings; Clock Chimes
- Page 4 – Push Button Battery Replacement
- Page 5 – Troubleshooting; Regulatory Information; No Service Parts Available for this Product
- Page 6 – LIMITED WARRANTY
- Page 7 – Campanilla Decorativa Inalámbrica; Caja Estilo “A”; Caja Estilo “B”
- Page 8 – Caja estilo “A”; Instale el pulsador y el timbre.
- Page 9 – Campanillas De Reloj; Instalación de la pila y graduación del tiempo
- Page 10 – Programaciones del código y del tono; Programaciones del código
- Page 11 – Reemplazo de la Batería del Pulsador
- Page 12 – Análisis de Averías; Información Regulatoria; No hay piezas de servicio disponibles para este producto
- Page 13 – GARANTÍA LIMITADA
- Page 14 – Carillon décoratif sans fil
- Page 15 – Montez l’unité de bouton-poussoir et le carillon.
- Page 16 – Carillons à horloge; Installation des piles et réglage de l’heure
- Page 17 – Réglages du code et de la mélodie; Réglage du code
- Page 18 – Remplacement de la pile de l’unité de
- Page 19 – Aucune pièce de rechange n’est disponible pour ce produit
- Page 20 – GARANTIE LIMITÉE
© 2003 DESA Specialty Products™
595-5506-09
This package includes (Style of push button and chime may vary from illus-
trations):
•
Wireless chime
•
Wireless push button w/battery
•
Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime (Clock chime
models require additional "AA" battery). In typical use, alkaline batteries
will last up to three years.
3.
Test range. Temporarily posi-
tion chime and push button
where you want them mounted.
Press push button to verify
chime and push button work
properly. If chime does not
sound, see Troubleshooting.
6180 Series and 6280 Series
Decorative Wireless Chime
Case Style "A" (Shown
In Vertical Position)
2.
Install 3 alkaline "D" batter-
ies. Make sure batteries are
oriented properly.
The base may be mounted in a
vertical or horizontal position.
The correct mounting position
will depend upon the specific
cover (model).
Cover
Mounting
Tabs
1.
Install alkaline type A23 12 volt push button bat-
tery. Remove back of case by pushing in tab on
bottom with a small screwdriver. Make sure battery
is oriented properly (see page 4).
12
34
56
78
-
+
-
+
-
+
Battery
Battery
Battery
Chime
Volume
Jumpers
Case Style "B"
Jumpers
Chime
Volume
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- 595-5506-09 Use either screws or double sided tape to mountpush button. To mount with screws, remove back of case bypushing in tab on bottom with a small screwdriver. Attach back of case to door jamb or wall. Snapfront of push button on. When attaching push button using double sidedtape, make su...
-3- 595-5506-09 Code and Tune Settings Code Settings Note: Most installations will not require you to change any jumpers onyour chime and push button. The push button and chime communicate by using a code that can be changedby removing and/or adding jumpers on both the push button and chime. Thecode...
-4- 595-5506-09 e r y B a t t e r y e r y B a t t e r y B Ba tt er y Ch im e V o l u m e 12 345 6 7 8 12 345 6 7 8 Push Button Battery Replacement Install an alkaline type A23 12 Volt bat-tery. See diagram inside push button forcorrect battery orientation. * Code Settings 1-7 Must Match Both Push Bu...
