Heath Zenith 6103 - Manual
Heath Zenith 6103 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – make sure there is no wire exposed at; Mount sensor into junction box using two large; Green; WARNING: Turn power off at the; INSTALLING SENSOR; Removing Control Panel Cover
- Page 3 – MOdE SELECTION SWITCh; SPECIFICATIONS
- Page 5 – Sus características incluyen:; INSTALACION; ESCOJA UN LUGAR; Interruptor de
- Page 6 – asegúrese; Monte el detector en la caja de empalmes con; AdvERTENCIA: Apague la energía; INSTALACION dEL dETECTOR; Cómo quitar la tapa del panel de control; verde
- Page 7 – INTERRUPTOR SELECTOR dE FASE; INSTALACION COMPLETA; ESPECIFICACIONES
- Page 8 – GUIA dE SOLUCION dE PROBLEMAS; GARANTÍA LIMITAdA A 2 AÑOS; SERvICIO TÉCNICO; devolver el producto a la tienda.
- Page 9 – On peut l'utiliser avec l'éclairage incandescent et l'éclairage; INSTALLATION; dÉTERMINER L'EMPLACEMENT; Interrupteur; Ses caractéritisques comprennent:
- Page 10 – s’assurer qu’aucun fil; Monter le détecteur dans la boîte de jonction; vert; M I S E E N G A R d E : C o u p e r; INSTALLATION dU dÉTECTEUR; Enlèvement du couvercle de la commande
- Page 11 – INTERRUPTEUR dE SÉLECTION dE MOdE; PARAChÈvEMENT dE
- Page 12 – dÉPANNAGE; SERvICE TEChNIQUE; de retourner l’article au magasin.
Included are:
• The sensor switch
• Cover plate
• 3 wire connectors
• 2 large screws
• 2 small screws
INSTALLATION
SELECT A LOCATION
The sensor is more sensitive to motion across
the front of the sensor than to motion towards
the sensor.
The detector senses heat in motion and pos-
sibly heat sources that change temperature
quickly. Therefore, to avoid false triggering,
avoid placing the sensor where it will be aimed
at air conditioners, heaters, and other sources
of heat or cold.
20 ft.
(6.1 m)
Features include:
• 110° motion detection angle
•
Fixed ON TIME – 5 minutes
• Works with incandescent and rapid start fluorescent lighting
• Works with motors up to 1/8 hp
• Slide switch selectable OFF, ON, and AUTO modes
AUTO
OFF
ON
The 6103 Motion Sensor Wall Switch detects motion to turn on lights
for a fixed time of 5 minutes. The unit has excellent sensitivity and
a 110° detection range. It can be used with incandescent lighting as
well as rapid start fluorescent lighting.
Installation is as easy as replacing a wall switch. However, some
codes require installation by a qualified electrician.
Motion Sensor
Wall Switch
6103
10 ft. (3.5 m)
0
Figure 1 - Typical Plan View of
Coverage
© 2008 HeathCo LLC
598-1349-00
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1349-00 Typical Installation 1. Remove existing wall switch from junction box. 2. Connect electrical leads of sensor as shown in Figure 3. Before installing sensor into junction box, make sure there is no wire exposed at each connection. 3. Mount sensor into junction box using two large mounti...
3 598-1349-00 USING MOTION SENSOR WALL SWITCh MOdE SELECTION SWITCh This switch allows you to select one of three modes of operation: OFF, AUTO, or ON. OFF: Lights stay off. AUTO: Lights automatically come on when mo- tion is detected. The lights will turn off 5 minutes after motion is no longer det...
5 598-1349-00 El interruptor de pared y detector de movimiento 6103 detecta movimiento y prende la luz por un periodo de tiempo fijado. La unidad goza de una excelente sensibilidad y de un gran alcance de detección de 110°. Se la puede usar con una luz incandescente o con una fluorescente que se pre...
