Heath Zenith 598-1165-03 - Manual

Heath Zenith 598-1165-03

Heath Zenith 598-1165-03 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – CAUTION: DO NOT connect the RED; Horizontal Junction Boxes Only:
  • Page 3 – Note: All wiring between fixtures should; Contact a qualified; Wiring to Motion Light &; OPTIONAL WIRING; Master; If the dual
  • Page 4 – Caulk fixture mounting surface; Optional Assembly
  • Page 5 – Least Sensitive; Note: Sensor has a 1
  • Page 6 – TROUBLESHOOTING GUIDE; returning product to store.; If the problem persists, call* for assistance at; No Service Parts Available for this Product
  • Page 7 – FUNCIONAMIENTO; Características; MODO MANUAL; PRUEBA; Nota: Cuando lo prenda por primera vez es-; Resumen de las modalidades del; AUTOMATICO; Prueba
  • Page 8 – INSTALACION; CABLEADO; Tuerza los cables de la caja de empalme; CUIDADO: NO conecte el cable ROJO; ADvERTENCIA: Desconecte la energía
  • Page 9 – CONEXION ALTERNA; Conexión a la luz de movimento y al aparato; rojo; Nota: Todo el cableado de los aparatos debe; Maestra; La
  • Page 10 – COMPLETE LA INSTALACION; Meta los cables en la caja de empalme.; MONTAJE OPCIONAL; Si lo tiene, usted puede instalar la cola; Ensamble superior del
  • Page 11 – Lo menos sensible; ESPECIFICACIONES
  • Page 12 – GUIA DE INvESTIGACION DE AvERIAS; antes de devolver el producto a la tienda.
  • Page 13 – Caractéristiques; Exigences; FONCTIONNEMENT; ESSAI; Résumé du mode de commutation; PRIORITÉ MANUELLE; Essai; Auto
  • Page 14 – Boîtes de jonction horizontales; INSTALLATION; Torsadez ensemble les fils de la boîte; AvERTISSEMENT: NE PAS raccorder le fil; CÂBLAGE; Méthode de mise à la terre recommandée
  • Page 15 – Si le câblage d’une installation à deux lumi-; Note: Le câblage entre les luminaires doit; Si vous avez des doutes sur la; CÂBLAGE FACULTATIF
  • Page 16 – COMPLÉTEZ L'INSTALLATION; passage des fils; Ensemble facultatif
  • Page 17 – Le moins sensible; Toute autre; Note: Le capteur doit se réchauffer 1
  • Page 18 – GUIDE DE DÉPANNAGE; SYMPTÔME; SERvICE TECHNIQUE; l’aide avant de retourner l’article au magasin.; Aucune pièce de rechange n’est disponible pour ce produit.
  • Page 19 – GARANTIE LIMITÉE DE 3 ANS
Loading the manual

Features

• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight

hours.

© 2006 DESA Specialty Products™

598-1165-03

ON-TIME

TEST

1 5 10 MIN

Set ON-TIME switch to 1,
5, or 10 minutes.

ON-TIME

Set the ON-TIME switch
on the bottom of the cover
plate to

TEST.

ON-TIME Switch at 1, 5,

or 10 minutes

... back on.

1 Second

OFF

then

...

Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.

Mode Switching Summary

Flip light switch

off for one second

then back on*

* If you get confused while switching modes,

turn the power off for one minute, then back
on. After the calibration time the control will
be in the AUTO mode.

MANUAL MODE

AUTO

TEST

Note: When first turned on wait about 1

1

/

2

minutes for the circuitry to calibrate.

Requirements

• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control

must be wired through a switch.

•

Some electrical codes require installa-
tion by a qualified electrician.

MANUAL MODE

AUTO

TEST

1 5 10 MIN

* resets to Auto Mode at dawn.

OPERATION

TEST

Motion Sensing Coach
Lights

This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
• Some Models Include an Optional Decora-

tive Tail Assembly

Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.

Mode:

On-Time

Works: Day Night

Test

5 Seconds

x

x

Auto

1, 5, or 10 Min

x

Manual

To Dawn*

x

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - CAUTION: DO NOT connect the RED; Horizontal Junction Boxes Only:

2 598-1165-03 INSTALLATION WIRING 1. Remove two nuts. For best performance, mount the fixture about 6 feet (1.8 m) above the ground. BLACK One Motion Light Black to black White to white Recommended Grounding Method Use a green ground “pigtail” (not provided) and twist one end together with the bare ...

Page 3 - Note: All wiring between fixtures should; Contact a qualified; Wiring to Motion Light &; OPTIONAL WIRING; Master; If the dual

3 598-1165-03 BLACK ❒ When wiring to additional standard fixture only: Strip the motion sensor's red wire and connect to the standard light's black wire. Connect all white wires together. Total fixture ratings must not exceed 500 Watts (4.1 A.). Note: All wiring between fixtures should be run in acc...

Page 4 - Caulk fixture mounting surface; Optional Assembly

4 598-1165-03 ❒ Caulk fixture mounting surface with silicone weather sealant. ❒ Install one 100 Watt maximum light bulb. ❒ If so equipped, install the fixture top. Secure with decorative screws. ❒ If you will not be installing the optional tail assembly, install the decorative nut onto the bottom of...

Other Heath Zenith Models

All Heath Zenith Other