Heath Zenith 5408 / 5410 - Manual
Heath Zenith 5408 / 5410 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; Wall Mount
- Page 3 – To Deactivate the Flash Alert; Bottom of Sensor; SENS; TEST AND ADJUSTMENT
- Page 4 – SPECIFICATIONS
- Page 5 – TROUBLESHOOTING GUIDE; No Service Parts Available for this Product
- Page 6 – TWO YEAR LIMITED WARRANTY
- Page 7 – Requisitos; Características; FUNCIONAMIENTO; Resumen de las modalidades del; PRUEBA
- Page 8 – INSTALACION; Montaje en pared
- Page 9 – Para Desactivar el Destello de Alerta; Parte de abajo del detector; PRUEBA Y AJUSTE
- Page 10 – Lo menos sensible; ESPECIFICACIONES
- Page 11 – GUIA DE INvESTIGACION DE AvERIAS; SERvICIO TÉCNICO; de devolver el producto a la tienda.; No hay piezas de servicio disponibles para este producto.
- Page 12 – GARANTÍA LIMITADA A 2 AÑOS
- Page 13 – FONCTIONNEMENT; Résumé du mode de commutation
- Page 14 – D’É; Montage mural
- Page 15 – Désactivation de l’alerte par clignotement; Bas du détecteur; ESSAIS ET RÉGLAGES
- Page 16 – FICHE TECHNIQUE; Portée maximale
- Page 17 – avant de retourner l’article au magasin.
- Page 18 – GARANTIE LIMITÉE DE 2 ANS
© 2007 HeathCo LLC
598-1303-01
Motion Sensor Light
Control
Models 5408 / 5410
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
• 5410 models have Flash Alert feature (light flashes on
then off twice before turning on full brightness).
Requirements
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
•
Some codes require installation by a qualified
electrician.
• This product is intended for use with a junction box
marked for use in wet locations.
• The backplate has knockouts so the sensor can be
mounted on most junction boxes.
• In some applications a universal adaptor plate may
be needed. Adaptors are available at home centers
and electrical supply stores.
Cover
Plate
Light Control
Lamp Holders
Sensor
2 Wire
Connectors
Gasket
4 Mounting
Screws (2 sizes)
This package includes:
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
MANUAL MODE
ON-TIME
10 5 1 TEST
10 5 1
TEST
ON-TIME
TEST
... back on.
AUTO
1 Second
OFF then...
Put the ON-TIME switch in the 1, 5,
or 10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off
for one second then
back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
As an ENERGY STAR
®
Partner, Heath
®
/Zenith
has determined that this product meets the EN-
ERGY STAR
®
guidelines for energy efficiency.
This product is ENERGY STAR
®
compliant
when used with 120 Watt bulbs.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
Until Dawn*
x
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1303-01 INSTALLATION For easy installation, select an existing light operated by a wall switch for replacement.For best performance, mount the fixture about 8 feet (2.4 m) above the ground. NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sen-sor down will reduce coverage dist...
3 598-1303-01 ❒ Align the light control cover plate and the junction box holes. Secure with the mounting screws. ❒ If not installed on a weatherproof box or if an adaptor plate (not included) was used, caulk the wall plate and mounting surface with silicone. ❒ Adjust the lamp holders by loosening th...
4 598-1303-01 Motion Motion The detector is most sensitive to motion across its field of view. Maximum Range Maximum Coverage Angle Avoid aiming the control at: • Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering. • A...
