Heath Zenith 5310 - Manual

Heath Zenith 5310 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Mount the Light Control; Bulb Installation and Re-lamping; CAUTION to avoid fire or burn hazards:; INSTALLATION; Wire the Light Control
Page 3 – SPECIFICATIONS; TEST AND ADJUSTMENT; Maximum Range; Motion
Page 4 – TROUBLESHOOTING GUIDE; before returning product to store.; No Service Parts Available for this Product; TEN YEAR LIMITED WARRANTY
Page 5 – FUNCIONAMIENTO; Requisitos; Resumen de las modalidades del interruptor; PRUEBA; Prueba
Page 6 – Instalación y cambio de bombilla; Instale el control de luz; INSTALACION; Conecte el control de luz
Page 7 – Lo menos sensible; Alcance Máximo
Page 8 – GUIA DE INvESTIGACION DE AvERIAS; pedir ayuda antes de devolver el producto a la tienda.; No hay piezas de servicio disponibles para este producto.; GARANTÍA LIMITADA A 10 AÑOS
Page 9 – Caractéristiques; FONCTIONNEMENT; PRIORITÉ MANUELLE
Page 10 – Montage De La Commande D’Éclairage; Installation et remplacement de
Page 11 – Le moins sensible; Portée maximale
Page 12 – GUIDE DE DÉPANNAGE; de l’aide avant de retourner l’article au magasin.; Aucune pièce de rechange n’est disponible pour ce produit.; GARANTIE LIMITÉE DE 10 ANS

Loading the manual

Professional Motion
Sensor Quartz Security
Light

Model 5310

Features

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).

Cover

Plate

Sensor

3 Wire Nuts

6 Screws

(3 sizes)

Light Control

Cover Plate

Gasket

598-1323-01

Halogen

Bulb

Requirements

• The light control requires 120-volts AC.
• This fixture is designed for wall mounting only.
• If you want to use Manual Override, the control must

be wired through a switch.

•

Some codes require installation by a qualified
electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

• The backplate has knockouts so the sensor can be

mounted on most junction boxes.

• In some applications a universal adaptor plate may

be needed. Adaptors are available at Home Centers
and Electrical Supply Stores.

S-hook

OPERATION

* resets to Auto Mode at dawn.

TEST

Put the ON-TIME switch on the
bottom of the sensor in the TEST
position.

MANUAL MODE

... back on.

AUTO

1 Second OFF

then...

Move ON-TIME Switch

to 1, 5, or 10 minutes

Mode Switching Summary

Flip light switch

off for one second

then back on*

MANUAL MODE

AUTO

TEST

Note: When first turned on wait about 1

minutes for

the circuitry to calibrate.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

This package includes:

Put the ON-TIME switch in the 1, 5,
or 10 minute position.

Mode:

On-Time:

Works:

Day

Night

Test

5 Sec

Normal

1, 5, 10 min.

Manual

Until Dawn*

10 5 1

TEST

ON-TIME

10 5 1

TEST

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Mount the Light Control; Bulb Installation and Re-lamping; CAUTION to avoid fire or burn hazards:; INSTALLATION; Wire the Light Control

2 598-1323-01 Mount the Light Control ❒ Align the light control cover plate and cover plate gasket and the junction box. Insert and tighten the mounting screws. ❒ If not installed on a weatherproof box or if an adaptor plate is used, caulk the wall plate and mounting surface with silicone weather se...

Page 3 - SPECIFICATIONS; TEST AND ADJUSTMENT; Maximum Range; Motion

3 598-1323-01 SPECIFICATIONS Range . . . . . . . . . . . . . Up to 70 ft. (21 m) [varies with surrounding temperature] Sensing Angle . . . . . . . Up to 180°Electrical Load . . . . . . . Up to 500 Watt Maximum Incandescent Power Requirements . . 120 VAC, 60 HzOperating Modes . . . . . TEST, AUTO and...

Page 4 - TROUBLESHOOTING GUIDE; before returning product to store.; No Service Parts Available for this Product; TEN YEAR LIMITED WARRANTY

4 598-1323-01 POSSIBLE CAUSE 1. The lamp is positioned too close to the sensor or pointed at nearby objects that cause heat to trigger the sensor. (Reposition the lamp away from the sensor or nearby objects.) 2. Sensor is pointed toward a heat source like an air vent, dryer vent, or brightly-painted...