Heath Zenith 52-4477-8 - Manual
Heath Zenith 52-4477-8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Black to black; recommended Grounding Method; WirinG; CautiOn: DO nOt connect the reD wire; Optional Wiring; fied electrician if there is any question as to the
- Page 3 – Slave; OPtiOnaL WirinG; Wiring Diagram 1 – When wiring to control a standard light fixture:; Master
- Page 4 – Optional assembly; FinaL aSSeMBLy; Installation; teStinG anD aDJuStMentS; Turn on the circuit breaker and light
- Page 5 – OPeratiOn; ManuaL MODe; Adjustment of
- Page 6 – minutes; MODe SWitCHinG SuMMary; Flip light switch off for
- Page 7 – trOuBLeSHOOtinG; If you experience a problem, follow this guide.; no Service Parts available for this Product
- Page 8 – CaraCtÉriStiqueS; Dans certaines localités, le code de l’électri-; Boîtes de jonction horizontales; inStaLLatiOn
- Page 9 – CÂBLaGe; Câblage; Si vous avez des doutes concernant la; Méthode de mise à la terre
- Page 10 – CÂBLaGe FaCuLtatiF; Diagramme de câblage 1 – Câblage d’un luminaire standard :; Maître
- Page 11 – aSSeMBLaGe FinaL; ensemble facultatif; eSSaiS et rÉGLaGeS; Ré-enclenchez le disjoncteur puis ouvrez
- Page 12 – toute autre façon de faire pourrait endomma-; FOnCtiOnneMent; jour nuit; essai; Le moins sensible; PriOritÉ ManueLLe; Réglage de
- Page 13 – Placer l’interrupteur ON-; rÉSuMÉ Du MODe De COMMutatiOn; Mettre l’interrupteur; rÉGLaGe De La ZOne De
- Page 14 – aucune pièce de rechange n’est disponible pour ce produit.; DÉPannaGe; Si vous éprouvez des difficultés, suivez ce guide.
Carriage Light with
Motion-activated Sensor
Tail Assembly
Coach Light
FeatureS
• Automatically comes on when motion is de-
tected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
This package includes:
• Mounting screws and wire connectors
requireMentS
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
•
Some electrical codes require installation by
a qualified electrician. Please check the codes
in your area.
Model 52-4477-8
Before installation, record the model num-
ber listed inside the fixture. attach receipt
in case of possible warranty issues.
Model number:
Wire
Path
Junction Box
Screws
Fixture
Screw
Horizontal Junction Boxes Only:
Remove ground screw and 2 fixture screws from
the mounting plate. Flip plate over. Reinsert
ground screw. Insert the 2 fixture screws in the
holes near the junction box screws holes. Wire
path must be located as shown above.
Ground
Screw
Wire Path
Ground Screw
Mounting
Plate
Fixture
Screw
inStaLLatiOn
Decorative Nut
Mounting Screw
Bracket
Mounting
Screw
Mounting
Plate
Junction
Box
598-1285-00
Note:
We recommend having an assistant help hold
the lantern assembly during the wiring process.
For best performance, mount the fixture about 6
feet (1.8 m) above the ground.
1. Remove two decorative nuts.
2. Remove mounting plate.
3. Tighten mounting screws finger tight.
4. Attach mounting plate to junction box.
WarninG: turn power off at circuit
breaker or fuse.
installation and
Operating instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1285-00 One Motion Light Black to black White to white Two Motion Lights recommended Grounding Method Use a green ground “pigtail” (not provided) and twist one end together with the bare fixture wire and the box ground wire. Secure with a wire connector. Secure the other end of the “pigtail” w...
598-1285-00 Black (Standard) Wiring Diagram 1 White Master Wiring Diagram 2 Red Wiring Diagram 3 Green or Bare Slave OPtiOnaL WirinG This fixture is provided with a sensor rated for 500 Watts. Since the fixture is only rated 100 Watts, 400 Watts of additional lighting may be controlled by this senso...
4 598-1285-00 teSt 1 5 10 MIN ON-TIME LO - M - Hi SENSITIVITY Junction Box Optional assembly If so equipped, you may install the decorative tail as shown below. 1. Screw hex nut onto bottom of fixture. 2. Screw extension bar into hex nut. 3. Slide tail piece and top trim piece onto exten- sion bar. ...
