Gorenje IT612SY2W - User Manual

45 296 9 A Hob on/off sensor B Power level/residual heat displays B1 The decimal point indicates the activated timer function C Cooking zone selection sensors E Sensor (-) and (+) H Clock display 1. Induction hotplate rear 2. Induction hotplate rear right3. Induction hotplate front left4. Induction ...

45296 9 Power setting Purpose 0 Off , using remaining heat 1 - 2 Maintaining warm food, slow simmer of smaller quantities (lowest setting) 3 Slow simmer (continuation of cooking after a powerful start-up) 4 - 5 Slow cooking (continuation) of larger quantities, roasting larger chunks 6 Roasting, brow...

45 296 9 • After connecting the glass ceramic hob to the power mains, all symbols on the display will light up briefl y. The cooking hob is then ready for operation. • The cooking hob is fi tted with electronic sensors which are activated by touching the designated surface areas with your fi nger for a...

45 296 9 Warning: The cooking zone with the SP P symbol (Super Power Boost) off ers the Super Power Boost function. In this zone, extra power is activated for fi ve minutes; then, it switches to level 9. Activating the Power Boost • Press the relevant sensor (C) to select the cooking zone. Use the »–...

45296 9 • Induction cooking hob is also fi tted with a built- in overheating protection device that protects the electronic parts from damage. The protection device operates at several levels. When the cooking zone temperature increases considerably, the cooking power is reduced automatically. If thi...

45296 9 After each use of the glass-ceramic hob, wait for it to cool down and clean it; otherwise, even the smallest food residue will be burnt onto the hot surface next time you use the appliance. For regular cleaning and maintenance of the glass-ceramic surface, use special conditioning agents whi...

45 296 9 Sugar and sugar-laden food may permanently damage the glass-ceramic surface (Figure 5); therefore, they should be removed from the glass-ceramic surface as soon as possible, although the cooking zone may still be hot (Figure 4). Any change in the color of the glass-ceramic surface does not ...

45 296 9 • Cooking hobs can be installed into worktops that are 30 to 50 mm thick. • If the board is thicker than 40 mm, its inner edge should be trimmed, or ground (Figure A). Thus, suffi cient air circulation will be provided. • If the thickness of your counter top exceeds 30 mm, then the opening ...

45296 9 The appliance is designed for two-phase connection; it can also be connected to a single phase. • Two-phase connection Install the jumper connectors on terminals 4 and 5. • Single-phase connection Install the jumper connectors on terminals 4 and 5, and terminals 1 and 2. Note: Connection 3 i...

45 296 9 • Connections may be carried out by a qualifi ed technician only. The earthing protection must comply with the standing regulations. • Connection terminals are revealed when the connection box cover is removed. • Prior any attempted connection check that the voltage indicated on the rating p...

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE TO THE OPERATION OF THE APPLIANCE. 45 296 9 TECHNICAL INFORMATION Rating plate A Serial number B Code C Model D Type E Trademark F Technical information G Compliance indications / symbols 25