Transition Networks SISTF10xx-130-LR(T) - Manual
Transition Networks SISTF10xx-130-LR(T) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Master Device; odd number
- Page 3 – Install the Fiber Cable; Failure to observe this caution; Set the Dip Switches; PORT; Install the Copper Cable
- Page 4 – Install the Port Alarm Device; Switch 6: Ring Master; Disables the device from being the Ring Master.; Internal Relay; WARNING: EXPLOSION HAZARD; WARNING: EXPLOSION HAZARD; - Substitution of components may
- Page 5 – Status LEDs; AutoCross; Operation; Features; Switching and Address Learning
- Page 6 – Copper Cable; OR; Please note the following when wiring the network:; Cable Specifications; Fiber Cable; Standard Models
- Page 7 – Environmental Type Tests; Technical Specifications; EMS Type Tests
- Page 8 – the device lost the; Troubleshooting; Check the twisted-pair cables for proper connection.
- Page 9 – Compliance Information; FCC Regulations
User’s Guide
SISTF10xx-130-LR(T)
Stand-Alone Redundant Ring Industrial Switch
• Copper to Fiber
• Ethernet / Fast Ethernet
• 10Base-T / 100Base-TX to 100Base-FX
• Extended Temperature
• Hazardous Environment
* T y p i c a l m a x i m u m c a b l e d i s t a n c e .
Actual distance is dependent upon the
physical characteristics of the network
installation.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .8
Cable Specifications . . . . . . . . . .10
Technical Specifications . . . . . . .12
Troubleshooting . . . . . . . . . . . . .14
Compliance Information . . . . . . .16
Part Number
Ports 1, 2, & 3 -
Copper
10Base-T/100Base-TX
Ports 4 & 5 -
100Base-FX
Duplex Fiber-Optic
SISTF1011-130-LR
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SISTF1012-130-LR
RJ-45
100 m (328 ft)*
ST, 1310 nm single mode
15 km (9.3 miles)*
SISTF1013-130-LR
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SISTF1014-130-LR
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
15 km (9.3 miles)*
SISTF1011-130-LRT
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SISTF1012-130-LRT
RJ-45
100 m (328 ft)*
ST, 1310 nm single mode
15 km (9.3 miles)*
SISTF1013-130-LRT
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SISTF1014-130-LRT
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
15 km (9.3 miles)*
Extended Temperature Models: -40°C to 75°C (-40°F to 167°F):
Standard Temperature Models: 0°C to 60°C (32°F to 140°F):
Transition Networks SISTF10xx-130-LR(T) redundant
ring industrial switch connects three (3) 10Base-T /
100Base-TX twisted-pair copper cable lines to two
( 2 ) 1 0 0 B a s e - F X f i b e r - o p t i c c a b l e l i n e s . T h e
SISTF10xx-130-LR(T) is designed for harsh industrial
environments such as hazardous locations (Class 1 Division 2 / Zone 2), includes a
relay output warning alarm, and is designed to withstand a high degree of vibration
and shock. It is also available in models that operate in either standard or extended
temperature ranges.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 NOTE: This device is intended to be grounded to a well-grounded mounting surface such as a metal plate. Install the grounding wire priorto connecting any other device. Ground the SISTF10xx-130-LR(T) G...
4 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued CAUTION: Disconnect the SISTF10xx-130-LR(T) from the DC power source BEFORE installing and/or wiring the device. Install the Fiber Cable To build the Redundant Ring network, ...
V2- V1- V1+ V2+ PWR2 FAULT PWR1 The screws to secure the wires are located on the side of the terminal block. fault contacts 6 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Install the Port Alarm Device A user-supplied port alarm device can be conn...
