Transition Networks CETTF10XX-200 - Manual
Transition Networks CETTF10XX-200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Set the 4-Position Switch; Installation; Connect the Twisted-Pair Copper Cable
- Page 3 – Connect the Fiber Cable; Operation; Status LEDs
- Page 4 – Product Features; AutoCross; Cable Specifications; Fiber Cable
- Page 5 – Copper Cable; Technical Specifications
- Page 6 – Troubleshooting; Contact Us
- Page 7 – Compliance Information; FCC Regulations
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .9
Troubleshooting . . . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
User’s Guide
CETTF10xx-200
Slide-in-Module Media Converter
• Ethernet
• Copper to Fiber
• 10Base-T to 10Base-FL
Transition Networks CETTF10xx-200 series Ethernet
10Base-T to 10Base-FL media converters (designed
to be installed in a
PointSystem™
chassis) connect
10Base-T twisted-pair copper cable to multimode or
single mode 10Base-FL fiber-optic cable.
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
Part Number
Port One -
Copper
10Base-T
Port Two -
Fiber-Optic
10Base-FL
CETTF1011-200
RJ-45
100 m (328 m)*
ST, 850 nm multimode
2 km (1.2 miles)*
CETTF1012-200
RJ-45
100 m (328 m)*
ST, 1310 nm single mode
20 km (12.4 miles)*
CETTF1013-200
RJ-45
100 m (328 m)*
SC, 850 nm multimode
2 km (1.2 miles)*
CETTF1014-200
RJ-45
100 m (328 m)*
SC, 1310 nm single mode
20 km (12.4 miles)*
CETTF1022-200
RJ-45
100 m (328 m)*
ST, 1310 nm single mode
40 km (24.9 miles)*
CETTF1027-200
RJ-45
100 m (328 m)*
ST, 1300 nm multimode
5 km (3.1 miles)*
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CETTF10xx-200 2 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch and the jumper. Failure to observe this caution could result in damage to, an...
CETTF10xx-200 4 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Connect the Fiber Cable 1. Locate or build IEEE 803.2 ™ compliant 10Base-FL fiber cable with male, two-stranded TX to RX connectors installed at both ends. 2. Connect the fiber cab...
CETTF10xx-200 6 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation -- Continued Product Features AutoCross ™ The AutoCross feature detects and configures the twisted-pair copper port onthe CETTF10xx-200 media converter to the correct straight-through (MDI) orcros...
