Transition Networks J/E-CX-TBT-01 - Manual

Transition Networks J/E-CX-TBT-01

Transition Networks J/E-CX-TBT-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
Page: / 5

Table of Contents:

  • Page 2 – Installation; Install the Coax Cable; Install the 10Base-T Cable; Operation; Power the Media Converter; Status LEDs
  • Page 3 – Cable Specifications; Technical Specifications
  • Page 4 – Troubleshooting; PWR LED on the media converter illuminated?; LNK/ACT LED on the media converter illuminated OR; TX; LNK/ACT LED on the media converter illuminated BUT; Contact Us
  • Page 5 – Compliance Information
Loading the manual

The Transition Networks J/E-CX-TBT-01
E t h e r n e t m e d i a c o n v e r t e r c o n n e c t s
1 0 B a s e - T s h i e l d e d o r u n s h i e l d e d
twisted-pair copper cable to 10Base-2
coaxial copper cable.

The J/E-CX-TBT-01 supports up to 24
devices daisy-chained on one coax
segment per twisted-pair segment.

User’s Guide

J/E-CX-TBT-01

Stand-Alone Media Converter

• Coax to Twisted-Pair
• 10Base-2 to 10Base-T

Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .3
Cable Specifications . . . . . . . . . . .4
Troubleshooting . . . . . . . . . . . . . .5
Technical Specifications . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . .7

Part Number

Port One -

Twisted-Pair

Port Two -

Coax

* Typical maximum cable distance. The actual maximum cable distances are

dependent upon the physical characteristics of the network installation.

J/E-CX-TBT-01

RJ-45, 10Base-T
100 m (328 ft)*

BNC, 10Base-2
185 m (610 ft)*

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Installation; Install the Coax Cable; Install the 10Base-T Cable; Operation; Power the Media Converter; Status LEDs

RJ-45 port on the other device (switch, work station, etc.) RJ-45 port on the media converter 2 J/E-CX-TBT-01 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation Install the Coax Cable 1. Locate or build 10Base-2 compliant coax cable with female, BNCconnectors ...

Page 3 - Cable Specifications; Technical Specifications

4 J/E-CX-TBT-01 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications 10Base-2 Cable Cable type: Stranded Coaxial RG-58 Impedance: 50 Ω Maximum cable distance: 185 m (610 ft.) Minimum cable distance: 0.5 m (1.6 ft.) Device placement along segment 0.5 m in...

Page 4 - Troubleshooting; PWR LED on the media converter illuminated?; LNK/ACT LED on the media converter illuminated OR; TX; LNK/ACT LED on the media converter illuminated BUT; Contact Us

Troubleshooting If the media converter fails, isolate and correct the fault by determining theanswers to the following questions and then taking the indicated action: 1. Is the PWR LED on the media converter illuminated? NO • Is the power cord properly installed in the media converter and at theexte...

Other Transition Networks Models

All Transition Networks Other