Transition Networks J/E-CX-TBT-01 - Manuals

Transition Networks J/E-CX-TBT-01 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - Installation; Install the Coax Cable; Install the 10Base-T Cable; Operation; Power the Media Converter; Status LEDs

RJ-45 port on the other device (switch, work station, etc.) RJ-45 port on the media converter 2 J/E-CX-TBT-01 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation Install the Coax Cable 1. Locate or build 10Base-2 compliant coax cable with female, BNCconnectors ...

Page 3 - Cable Specifications; Technical Specifications

4 J/E-CX-TBT-01 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications 10Base-2 Cable Cable type: Stranded Coaxial RG-58 Impedance: 50 Ω Maximum cable distance: 185 m (610 ft.) Minimum cable distance: 0.5 m (1.6 ft.) Device placement along segment 0.5 m in...

Page 4 - Troubleshooting; PWR LED on the media converter illuminated?; LNK/ACT LED on the media converter illuminated OR; TX; LNK/ACT LED on the media converter illuminated BUT; Contact Us

Troubleshooting If the media converter fails, isolate and correct the fault by determining theanswers to the following questions and then taking the indicated action: 1. Is the PWR LED on the media converter illuminated? NO • Is the power cord properly installed in the media converter and at theexte...

Transition Networks Manuals