Transition Networks RS-232-TO-100BASE-FX - Manuals

Page 3 - Table of Contents

Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 i Table of Contents FCC warning ..............................................................................................................................................v CE Mark ........................

Page 6 - Intentionally Blank

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 iv Intentionally Blank

Page 7 - Trademark, copyright, and product classification information; Trademark; CE Marking

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 v Trademark, copyright, and product classification information Trademark All trademarks and registered trademarks are the property of their respective owners. Copyrig...

Page 8 - About this product and manual; Device server

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 vi About this product and manual Device server The SDSFE31XX-100 Industrial Device Server design provides a DB-9 (RS-232) connection over fiber cables, where the conn...

Page 9 - About this product and manual,; Box contents; The box should include the following:; DIN Rail Kit

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 vii About this product and manual, continued Box contents The box should include the following: • One RS-232-to-100Base-FX Industrial Device Server • DIN Rail Kit • F...

Page 10 - Cautions and warnings; Cautions; Cautions indicate the possibility of damage to equipment.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 viii Cautions and warnings Cautions and warnings Make sure that you read and understand all content identified by these two symbols: Cautions and warnings appear here...

Page 11 - Cautions and warnings,; CAUTION; Warnings indicate the possibility of injury to persons.; WARNING

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 ix Cautions and warnings, continued CAUTION When connecting DC power wires to the terminal-block plug, pay close attention to the polarity markings shown near the ter...

Page 13 - In this section; These are the topics:; Topic; General description

Section I SDSFE31xx-100 Industrial Device Server In this section These are the topics: Topic See Page General description 2 SDSFE31xx-100 Industrial part numbers 3 Physical description 4

Page 14 - Overview

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 2 General description Overview The SDSFE31xx-100 Industrial Device Server features complete Ethernet and TCP/IP network support that allows devices in industry with R...

Page 15 - SDSFE31xx-100 Industrial part numbers; Table 1: SDSFE31xx-100 Industrial Part Numbers

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3 SDSFE31xx-100 Industrial part numbers Standard models The part numbers shown in Table 1 perform as described in this manual. Table 1: SDSFE31xx-100 Industrial Part ...

Page 16 - Physical description; Figure 1: SDSFE31xx-100 Industrial Device Server

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 4 Physical description Device server parts and functions Figures 1 and 2 identify the SDSFE31xx-100 Industrial Device Server parts and functions. Figure 1: SDSFE31xx-...

Page 17 - Physical description,; Device server parts and functions

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 5 Physical description, continued Device server parts and functions (continued) Figure 2: SDSFE31xx-100 Industrial Device Server (Top and Back Views) 10. Terminal Boc...

Page 20 - Device Service mounting location; Leave at least 5cm

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 8 Device Service mounting location Installation considerations The location selected to install the Device Server can greatly affect its performance. When selecting a...

Page 21 - DIN rail clip and DIN rail mounting; Figure 3: Mounted DIN Rail Clip; The surface must support at least 1,000 gm; . Failure to observe this caution could result in damage to the

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 9 DIN rail clip and DIN rail mounting Mounting the DIN rail clip The aluminum DIN Rail Clip should already be mounted to the back panel of the Device Server. If you n...

Page 22 - DIN rail clip and DIN rail mounting,; Step; Press DOWN on the Device Server and then IN to snap it into place on; Figure 4: Device Server Mounting to DIN Rail

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 10 DIN rail clip and DIN rail mounting, continued Mounting the device server To mount the Device Server to the DIN rail, see Figure 4 and do the following: Step Actio...

Page 23 - Grounding the Device Server; The following wiring considerations are recommended:

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 11 Grounding the Device Server WARNING Be sure to disconnect power before installing and wiring the Device Server. Failure to observe this warning could result in an ...

Page 24 - Connecting power to the Device Server; Dual; Figure 6: Redundant Power Connections; IMPORTANT

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 12 Connecting power to the Device Server Redundant power Dual (redundant) power inputs can be connected simultaneously to live DC power sources. See Figure 6. If one ...

Page 25 - Connecting power to the Device Server,; to mate with the; Turn the external power source OFF.

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 13 Connecting power to the Device Server, continued CAUTION When connecting DC power wires to the terminal-block plug, pay close attention to the polarity markings sh...

Page 26 - Terminal-block plug wiring; Make sure that the DC power source is stable and clean.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 14 Connecting power to the Device Server, continued Terminal-block plug wiring (continued) Step Action 6. Insert the terminal-block plug into the Device Server’s term...

Page 27 - Connecting an alarm fixture; Alarm relay; To wire an alarm to the relay contacts, do the following:; Verify that the external power source is turned OFF.; Figure 10: Alarm Relay Wiring

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 15 Connecting an alarm fixture Alarm relay The Device Server has contacts for connecting an external alarm fixture. Located on the green terminal block on the top pan...

Page 28 - Connecting an alarm fixture,; Any link failure

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 16 Connecting an alarm fixture, continued Fault indications Wire the relay contacts to any warning light or audible alarm in the factory or control room. Then when a ...

Page 29 - Connecting fiber cables; Remove and keep the rubber fiber-port-protector cover shown below.; Figure 11: Fiber Cable Connections; the connection—Link/Act LED should be lit.; Warning

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 17 Connecting fiber cables Fiber cable installation When connecting fiber cables to the 100BASE-FX port on the Device Server, make sure the correct type is used: ST o...

Page 30 - Connecting DB-9 cable; Figure 12: Straight Through and Crossover Cables

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 18 Connecting DB-9 cable DB-9 cable configuration Depending on the equipment type, data terminal equipment (DTE) or data communication equipment (DCE), use a null mod...

Page 31 - DIP Switches; No Description; Figure 14: Dip Switch Settings and Explanations; cycled

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 19 DIP Switches DIP switch position descriptions The Device Server features four DIP switches on the top panel that set the responds for the alarm in case of power lo...

Page 33 - Device Server configuration

Section III Operations In this section These are the topics: Topic See Page Light Emitting Diodes (LEDs) 22 Device Server configuration 23 Configuration software 25

Page 34 - LEDs; LED; Figure 15: LEDs and Description Chart

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 22 Light emitting diodes (LEDs) LEDs The Device Server has LED indicators located on its front panel. The LEDs present at-a-glance network status, and provide real-ti...

Page 35 - Device Server configuration; Introduction; (if connecting with the default; Figure 16: Login Dialog Box; Enter default user name “admin” as shown in Figure 16.

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 23 Device Server configuration Introduction Use a web browser to configure the Device Server. You can set the TCP/IP configuration for the device to monitor and manag...

Page 36 - Device Server configuration,; Web access

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 24 Device Server configuration, continued Web access (continued) Figure 17: Main Menu Screen

Page 37 - Configuration software; System Details; Figure 18: Expanded Configuration Software Tree

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 25 Configuration software Expanded software tree On the left side of the GUI screen, under the Transition logo, are five menu items: • System Details • Configuration ...

Page 38 - Configuration software,; Click the Systems Details link to show its two submenu options:; Figure 19: System Info Submenu; It also allows editing the IP address,; Figure 20: Master Information Read Only Submenu; This read-only menu displays the hardware and firmware versions.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 26 Configuration software, continued Systems details menu options Click the Systems Details link to show its two submenu options: • System Info • Master Info System i...

Page 39 - Click the Configuration link to show its two submenu options:; Figure 21: Serial Port Transfer Configuration Submenu Display

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 27 Configuration software, continued Configuration menu options Click the Configuration link to show its two submenu options: • Serial Port Config • Serial Connect St...

Page 40 - Serial port config submenu; Remote IP; Figure 22: Serial Device Connection to a Host via Ethernet Network

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 28 Configuration software, continued Serial port config submenu (continued) Submenu Item Description Server/Client Type Defines whether the Device Server is acting as...

Page 41 - Converter Mode (CR) is used for serial tunneling; Figure 23: Serial Tunneling; This time value

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 29 Configuration software, continued Serial port config submenu (continued) Submenu Item Description DS/CR Modes (continued) Converter Mode (CR) is used for serial tu...

Page 42 - Figure 24: RS-232 Port Connection Status Submenu Display

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 30 Configuration software, continued Serial connect status submenu Click the “serial connect status” link to launch the Device Server serial connection status submenu...

Page 43 - Figure 25: User Configuration Submenu

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 31 Configuration software, continued Mgmt config menu options Click the Mgmt config link to show its four submenu options: • User Config • Firmware Download • Configu...

Page 44 - Figure 26: Firmware Upgrade Submenu; To upgrade the firmware via HTTP, do the following:

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 32 Configuration software, continued Firmware download submenu Click the “firmware download” link to launch the Device Server firmware download submenu. You can upgra...

Page 45 - FW upgrade via HTTP; name field with the firmware-upgrade address, as shown in Figure 28.; Figure 28: HTTP Firmware File Name Captured; Click the START UPGRADE BY HTTP button to start downloading the; Figure 29: System Firmware Upgrade Time Out Display

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 33 Configuration software, continued FW upgrade via HTTP (continued) Step Action 2. Click the OPEN button on the choose file dialog box to populate the file name fiel...

Page 46 - When the firmware upgrade is complete, the index page

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 34 Configuration software, continued FW upgrade via HTTP (continued) When the firmware upgrade is complete, the index page (system information) will appear, as shown ...

Page 47 - Click the START UPGRADE BY TFTP button to start downloading the

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 35 Configuration software, continued FW upgrade via TFTP (continued) Step Action 3. Click the START UPGRADE BY TFTP button to start downloading the firmware, and a sy...

Page 48 - Figure 34: Configuration System Backup File Display; To “backup” the configuration file to the local PC, do the following:; Click the BACKUP SETTING button on the display, and the save; Figure 35: Save System Backup File Dialog Box; to select a location for storing the file on the local PC.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 36 Configuration software, continued Configuration file submenu Click the “configuration file” link to show the Device Server system backup submenu, shown in Figure 3...

Page 49 - To Restore the backup configuration file, do the following:

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 37 Configuration software, continued Configuration file restore To Restore the backup configuration file, do the following: Step Action 1. Enter the file name or clic...

Page 50 - Click the SNMP config link to show its two submenus:; Figure 39: SNMP Communities Display; If it only knows the “Get” community string, it can only read MIBs.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 38 Configuration software, continued SNMP configuration menu Click the SNMP config link to show its two submenus: • SNMP Communities • IP Trap Manager SNMP communitie...

Page 51 - Figure 40: IP Trap Manager Option display; Table 2 describes the fields on the IP Trap Manager display.; Table 2: IP Trap Parameters and Descriptions; IP Address

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 39 Configuration software, continued IP trap manager submenu Click the “IP Trap Manager” link to launch the IP Trap manager submenu option, shown in Figure 40. Figure...

Page 52 - IP trap manager submenu

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 40 Configuration software, continued IP trap manager submenu (continued) You can configure up to five management stations to receive authentication failure messages o...

Page 53 - Click the System Restart link to show the Restart submenu options:; Note; : You can “restore” or “reset” the Device Server remotely via software.; System restore

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 41 Configuration software, continued System restore submenu Click the System Restart link to show the Restart submenu options: • System Restore • Reset Note : You can...

Page 55 - In the section

Section IV Serial IP Redirector Software In the section This are the topics: Topic See Page Serial IP redirector software description 44 Getting started and software pre-installation considerations 45 Installing IP redirector software 46 Upgrading the software 50 Creating virtual COM ports 51

Page 56 - Serial IP redirect software description; The networked pieces fit together in the following manner:; Stage

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 44 Serial IP redirect software description COM port usage The Serial/IP Redirector Software adds "virtual" COM ports to Windows operating systems. Similar to ...

Page 57 - Getting started and software pre-installations considerations; (An Ethernet local area network will

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 45 Getting started and software pre-installations considerations Pre-installation considerations Supported platforms: • Intel-compatible PCs with 32-bit Pentium-class...

Page 58 - Installing serial IP redirector software; To install the software, do the following:; Login as a user with administrator privileges.; Figure 44: Installation Wizard Dialog Box; Serial IP Redrector432.exe; Figure 45: Agreement Dialog Box

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 46 Installing serial IP redirector software Software installation To install the software, do the following: Step Action 1. Login as a user with administrator privile...

Page 59 - Installing serial IP redirector software,; Click the AGREE radio button.; Figure 46: Software Destination Folder Dialog Box; as shown in Figure 47.

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 47 Installing serial IP redirector software, continued Step Action 6. Click the AGREE radio button. 7. Click the NEXT button and the “destination folder” will appear ...

Page 60 - Figure 47: Select Features Dialog Box; via the pulldown menu. See; Figure 48: Pulldown Menu Options; “ready to install software” dialog box, shown in Figure 49.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 48 Installing serial IP redirector software, continued Figure 47: Select Features Dialog Box On the select features dialog box, you can select how much of the softwar...

Page 61 - Figure 49: Ready to Install Application Dialog Box; Click the view release notes check box, if not selected.; Figure 50: Install Successful Message Box; Click the FINISH button and the “release notes” will appear on the

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 49 Installing serial IP redirector software, continued Figure 49: Ready to Install Application Dialog Box Step Action 11. Click the view release notes check box, if n...

Page 62 - Upgrading serial IP redirector software; Figure 51: Uninstall Message Box

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 50 Upgrading serial IP redirector software Software upgrades If you are installing a software upgrades, please note: • The existing software must be the same major ve...

Page 63 - Creating virtual COM ports; Control panel

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 51 Creating virtual COM ports Control panel After loading the software, the Serial IP Control Panel dialog box will appear, as shown in Figure 53. Figure 53: Serial I...

Page 64 - Creating virtual COM ports,; and/or ranges of numbers; Select a virtual COM port from the list

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 52 Creating virtual COM ports, continued Virtual COM port creation Alternatively, you can edit the COM port ranges directly. Use individual COM port numbers (such as ...

Page 65 - Check “user credentials” and select “use credentials below” from the; Figure 55: Virtual Port Configuration

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 53 Creating virtual COM ports, continued Step Action 4. On the Serial IP Control Panel, enter the IP address and port number of the Device Server. See Figure 55. 5. C...

Page 66 - Click the CONFIGURATION WIZARD button to bring up the; Figure 56: COM Port 7 Configuration Wizard; If any of the settings are incorrect, change them.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 54 Creating virtual COM ports, continued Step Action 7. Click the CONFIGURATION WIZARD button to bring up the “configuration wizard,” shown in Figure 56. Figure 56: C...

Page 67 - Review error messages in the status panel. See Figure 57.; Figure 57: COM Port Configuration Wizard

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 55 Creating virtual COM ports, continued If the wizard fails The wizard indicates errors in the status panel, with error details appearing in the log panel. In the ca...

Page 68 - If the wizard is successful; those devices will appear against each Virtual COM port listed.

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 56 Creating virtual COM ports, continued If the wizard is successful (continued) Step Action 5. Click the USER SETTING button on the wizard to return to the control p...

Page 69 - Troubleshooting; Troubleshooting problem and corrective action table

Section V: Troubleshooting Introduction This section provides basic troubleshooting information for the Device Server via a problem and corrective action table. The problems are stated in the problem column and the action(s) to take for the problem is stated in the corrective action column. If the c...

Page 70 - Problem; Is the power LED lit?

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 58 Troubleshooting problem and corrective action table Problem Potential Cause Potential Solution • Is the wired terminal-block plug inserted into the Device Server? ...

Page 71 - Cable Specifications; This section provides copper and fiber cable specifications.; serial cable specifications

Section VI: Cable Specifications Introduction This section provides copper and fiber cable specifications. In this section These are the topics: Topic See Page DB-9 (RS-232) serial cable specifications 60 Fiber cable and optic specifications 61

Page 72 - Maximum cable distance:; Figure 59: DB-9 Connector and Cable Pin Assignment Chart

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 60 Copper DB-9 (RS-232) serial cable specifications What is RS-232 (DB-9)? RS-232 is a serial device control protocol that provides an interface between Data Terminal...

Page 73 - Fiber cable and optic specifications; Parameter; The following shows the fiber optic specification:; Fiber Cable

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 61 Fiber cable and optic specifications Fiber cable characteristics Cable physical characteristics must meet or exceed IEEE 802.3™ specifications. Parameter Specifica...

Page 75 - Conformity Information

Section VII: Contact Us, Warranty, & Conformity Information Introduction This section explains how to contact Transition Networks via Phone, fax, email, and direct mail. It also explains: • What the warranty covers • Who to contact to return product • How and where to return the product In this ...

Page 76 - Contact us; Live Web chat

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 64 Contact us Technical support Technical Support is available 24 hours a day. United States: 1-800-260-1312 International: 00-1-952-941-7600 Live Web chat Chat live ...

Page 77 - Conformity declaration; Declaration of Conformity

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 65 Conformity declaration Declaration of Conformity Name of Mfg: Transitions Networks 6427 City West Parkway, Minneapolis MN 55344 U.S.A. Model: SDSFE31xx-100 Industr...

Page 78 - Warranty; Replace the product with an equivalent functional product

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 66 Warranty Limited lifetime warranty Effective for products shipped May 1, 1999 and After. Every Transition Networks’ labeled product purchased after May 1, 1999 wil...

Page 79 - continued

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 67 Warranty, continued How and where to send the returns Send the defective product postage and insurance prepaid to the following address: CSI Material Management Ce...

Page 80 - Compliance information; Compliances

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 68 Compliance information Compliances CISPR22/EN5022 Class A + EN55024; EN60950 Class A; FCC Class A; CE Mark FCC Regulations This equipment has been tested and found...

Page 81 - Compliance information,

SDSFE31xx-100 Industrial Device Server Transition Networks 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 69 Compliance information, continued European Regulations, (continued) In accordance with European Union Directive 2002/96/EC of the European Parliament and of the Co...

Page 83 - Technical Specification

Appendix A: Technical Specification SDSFES31xx-100 specifications, notices, and warnings Parameter Description Standards IEEE 802.3 (100BASE-FX/ Fast Ethernet) EIA/TIA RS-232 EIA/TIA-574 Regulatory Compliance for Emission FCC Part 15 of Class A & CE approved Ports 1x fiber single mode/multi-mode...

Page 84 - Notices; Subchapter J applicable at the date of manufacture.; Warnings; Visible and invisible laser radiation when open: Do not stare into

Transition Networks SDSFE31xx-100 Industrial Device Server 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 72 SDSFES31xx-100 specifications, notices, and warnings, continued Notices • The information in this user’s guide is subject to change. For the most up-to-date inform...

Page 85 - Index

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 73 Index Alarm fault indications ......................................................... 16 Cabling DB-9 cable types....................................................... 18 DB-9 to serial port................................