Transition Networks SISTF10xx-130-LR(T) - Manuals

Page 2 - Installation; Master Device; odd number

2 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 NOTE: This device is intended to be grounded to a well-grounded mounting surface such as a metal plate. Install the grounding wire priorto connecting any other device. Ground the SISTF10xx-130-LR(T) G...

Page 3 - Install the Fiber Cable; Failure to observe this caution; Set the Dip Switches; PORT; Install the Copper Cable

4 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued CAUTION: Disconnect the SISTF10xx-130-LR(T) from the DC power source BEFORE installing and/or wiring the device. Install the Fiber Cable To build the Redundant Ring network, ...

Page 4 - Install the Port Alarm Device; Switch 6: Ring Master; Disables the device from being the Ring Master.; Internal Relay; WARNING: EXPLOSION HAZARD; WARNING: EXPLOSION HAZARD; - Substitution of components may

V2- V1- V1+ V2+ PWR2 FAULT PWR1 The screws to secure the wires are located on the side of the terminal block. fault contacts 6 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Install the Port Alarm Device A user-supplied port alarm device can be conn...

Page 5 - Status LEDs; AutoCross; Operation; Features; Switching and Address Learning

8 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation Status LEDs Use the status LEDs to monitor the SISTF10xx-130-LR(T) in the network. The three LEDs near the top indicate the power and fault status: PWR1 (amber) on = Primary power is connect...

Page 6 - Copper Cable; OR; Please note the following when wiring the network:; Cable Specifications; Fiber Cable; Standard Models

10 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 5: (minimum requirement) Gauge: 24 to 22 AWG Attenuation: 22.0 dB /100m @ 100 MHz Maximum Cable Distance: 100 meters • Straight-through OR cros...

Page 7 - Environmental Type Tests; Technical Specifications; EMS Type Tests

12 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Technical Specifications For use with Transition Networks Model SISTF10xx-130-LR(T) or equivalent Standards: IEEE 802.3™, 802.3u™; 802.3x™ Data Rate: 10 Mb/s, 100 Mb/s (copper); 100 Mb/s (fiber) Proc...

Page 8 - the device lost the; Troubleshooting; Check the twisted-pair cables for proper connection.

14 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Troubleshooting If the device fails, isolate and correct the fault by determining the answers to thefollowing questions and then taking the indicated action: 1. Is the PWR1 LED illuminated?NO • Ensur...

Page 9 - Compliance Information; FCC Regulations

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THEPUBLIC TELEPHONE NETWORK. Failure to observe this caution could result indamage to the public telephone network. Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen diejeweligen...