Transition Networks S4TEF10xx-11x - Manual
Transition Networks S4TEF10xx-11x – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Part Number; Installation; Copper and fiber ports
- Page 3 – Switch set #2 - serial and ethernet options
- Page 4 – Installation — Continued
- Page 5 – Hardware/software jumper; Install the T1/E1 cable; Install the fiber cable
- Page 6 – Install the RS-232 data cable; Operation; Fiber network LEDs; LKF; Optional accessories; Ethernet LEDs
- Page 7 – Accessing the local RS232 factory maintenance interface; Operation — Continued; Remote management function; SNMP
- Page 10 – Cable Specifications; Fiber cable
- Page 11 – Ethernet cable
- Page 12 – Cable Specifications —Continued; Technical Specifications
- Page 13 – Troubleshooting
- Page 14 – Contact Us; Declaration of Conformity; Compliance Information; Canadian regulations
User’s Guide
S4TEF10xx-11x
Stand-Alone Media Converter
•
Twisted-Pair Copper to Fiber
• 10/100Base-TX to 100Base-FX
• RS-232 to Fiber
• (4) T1/E1 to Fiber
The S4TEF10xx-11x media converter is
designed to extend signals from a 10Base-T
Ethernet/100Base-TX Fast Ethernet port, an
RS-232 data port, and up to four (4) T1/E1
network ports over fiber. The Ethernet, RS-232, and T1/E1 interfaces are independent of
each other and the signals from these ports can be sent over the fiber interface
simultaneously.
The S4TEF10xx-11x is designed to be installed in pairs. For example, install one
S4TEF1011-110 as the local media converter and another S4TEF1011-110 as the remote
media converter. All S4TEF10xx-11x models have the following copper connectors.
*Typical maximum cable distance. Actual
distance is dependent upon the physical
characteristics of the network.
The chassis version of the media converter is
C4TEF10xx-11x. For more information, see
the user’s guide on-line at:
www.transition.com.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . .10
Cable Specifications . . . . . . . . . .19
Technical Specifications . . . . . . .23
Troubleshooting . . . . . . . . . . . . .24
Contact Us . . . . . . . . . . . . . . . . .26
Compliance Information . . . . . . .27
Part Number
Duplex Fiber-Optic - 100Base-FX
S4TEF1011-110
ST, 1300 nm multimode, 2 km
(1.2 miles)*
S4TEF1013-110
SC, 1300 nm multimode, 2 km
(1.2 miles)*
S4TEF1014-110
SC, 1310 nm single mode, 20 km
(12.4 miles)*
S4TEF1015-110
SC, 1310 nm single mode, 40 km
(24.8 miles)*
S4TEF1016-110
SC, 1310 nm single mode, 60 km
(37.2 miles)*
S4TEF1017-110
SC, 1550 nm single mode, 80 km
(49.7 miles)*
S4TEF1018-110
MT-RJ, 1300 nm multimode, 2 km
(1.2 miles)*
Connector Type
Number
Description
Ethernet
1
RJ-45, 100 Mb/s, 100 m
(328 ft.)*
RS-232
1
6-pin, DIN serial
3.2 m
(10 ft.)*
T1
4
RJ-48
S4TEF1029-11x
(Single mode, single fiber models are listed on page 2.)
The various fiber connectors are available on separate models. Both duplex and single
mode fiber optic converters are available:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 S4TEF10xx-11x 24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 PWR LKF 100Base-FX 10/100Base-TX TX RX RS-232 4 3 2 1 LNK LNK LNK LNK AIS AIS AIS AIS fiber port Ethernet port RS-232 port T1/E1 ports Part Number Fiber-Optic - Single Fiber, Single Mode, 100Base-FX S4TEF1029-...
4 S4TEF10xx-11x 24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- Continued Switch set #1 - T1/E1 options 5, 6, 7, 8 - Loop-Back settings The loop-back setting is used for installation and network debugging procedures. Eachof the T1/E1 ports can be individual...
6 S4TEF10xx-11x 24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation — Continued Switch set #2 - serial and ethernet options 6 - Twisted-pair Auto-Negotiation Up (Enabled) - The media converter “advertises” ALL rate and mode capabilities to the network: • 100 Mb/s ...
