Philips AC2729/11 - Quick Guide

Philips AC2729/11

Philips AC2729/11 – Quick Guide, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – Micromario DI DACH_DE
  • Page 3 – Micromario DI DACH_FR
  • Page 4 – Micromario DI DACH_NL
Loading the manual

Connectivity

Clean Home+

NanoCloud technology evenly distributes invisible water vapour into your room.

In dry conditions moisture from the humidifier will be absorbed by walls,

furniture, and other items in your room. Ventilation of dry outside air will also

increase the time it takes to reach the target humidity.

To optimize humidification and purification performance, it's recommended to

close doors and windows during use.

Allergen

mode

2-in-1

mode

Auto

mode

Purification

ONLY mode

Sleep

mode

Replace

filter alert

Water

refill alert

Pre-filter

cleaning

alert

3-digit display PM2.5 /

IAI / Humidity level

PM2.5

indicator

WiFi

indicator

Air quality

ring

Good

Poor Very poor

Fair

Child

lock

Auto

Mode

Fan

speed

Power

Hold for 3 seconds

Humidity

setting

Light

dim

Timer/

reset

2-in-1

mode

on/off

Indoor Allergen

Index

Open the app and click on "Connect a New Device" or press the "+"

button to connect your device. Please follow the steps in the app.

You can use the app to control the purifier and check air quality.

Download and install the Philips app

Control

Display

Allergen index from 1 to 12

where 1 indicates best air quality

Hold for 3 seconds: Display switch between

PM2.5 / IAI / Current humidity level

Micromario DI DACH_EN

90x127mm

When display shows A3 / C7 / F1

The filter may produce smell after being used

for a while because of the absorption of

indoor air. Remove the filter and place it

where it has direct sunlight and ventilation for

several hours. Re-install and try using it again.

If the odor remains, please replace the filter.

Maintenance

Clean the pre-filter and wick

Time to replace

NanoProtect filter

Time to replace wick

Descale the wick with the water and white

vinegar or citric acid, rinse with water and air dry.

EVERY

W E E K

Time to replace

Active Carbon filter

!

Press for 3 seconds to reset after

cleaning or replacing accessory

Rinse the water tank, the water tray and the

NanoCloud rotray humidification wick.

4241 210 99873-1

2 hours

NanoProtect filter Series 3

NanoProtect filter

Active Carbon

Pre-filter

Wick

When display shows F0

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand
Philips
Model
AC2729/11
Document type
Quick Guide
Language(s)
German, English, French, Dutch
Pages
4
File size
3.9 MB
Format
PDF

Other Manuals for Philips AC2729/11

Summary

Page 2 - Micromario DI DACH_DE

Die NanoCloud-Technologie verteilt unsichtbaren Wasserdampf gleichmäßig in Ihrem Zimmer. In trockener Umgebung wird die vom Luftbefeuchter ausgegebene Feuchtigkeit zunächst von Wänden, Möbeln und anderen Gegenständen im Raum absorbiert. Auch eine Belüftung mit trockener Außenluft erhöht die Zeit bis...

Page 3 - Micromario DI DACH_FR

La technologie NanoCloud répartit uniformément la vapeur d'eau invisible dans votre pièce. Si l'atmosphère est sèche, une partie de l'humidité produite par l'humidificateur d'air sera absorbée par les murs, les meubles et d'autres éléments de votre pièce. L'apport d'air extérieur sec lorsque vous aé...

Page 4 - Micromario DI DACH_NL

NanoCloud-technologie verspreidt onzichtbare waterdamp gelijkmatig in uw kamer. In droge omstandigheden wordt vocht van de luchtbevochtiger geabsorbeerd door muren, meubilair en andere voorwerpen in uw kamer. Door ventilatie van droge buitenlucht duurt het ook langer voordat de gewenste luchtvochtig...

Ask a question

Up to 3 photos. Max 5 MB each. Formats: JPG, JPEG, PNG, WebP.