Husqvarna 225AI15/AI25 - Manual

English – 7 IMPORTANT INFORMATION • The machine is solely designed for drilling inice. • Never use the machine if you are tired, if youhave consumed alcohol, or if you are takingmedicines that can affect your sight, yourjudgement or the control of your body. • Use personal protective equipment. See ...

8 – English SAFETY INSTRUCTIONS Safety instructions for using themachine. Protective instructions while working • Always ensure you have a safe and firm workingposition. • Always use both hands to hold the machine. • Make sure that no part of your body comes intocontact with the cuttingattachment wh...

English – 9 Protective instructions whenwork is completed • The transport guard must always be fitted to the cutting attachment when the machine is not in use. • Ensure the cutting attachment has stopped and remove the spark plug cable from the spark plug before carrying outcleaning, repairs or insp...

10 – English 12. Choke13. Allen key 14. Spark plug spanner 15. Blade cover (Transport) 16. Air purge17. Drill 18. Cutter 19. Cutting attachment WHAT IS WHAT? What is what on the ice drill? 1. Operator’s Manual 2. Gearbox3. Loop handle 4. Cylinder cover 5. Starter handle 6. Stop switch7. Throttle tri...

English – 11 FUEL HANDLING • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. WARNING!Always provide good ventilation whenhandling fuel. ! Fuelling WARNING!The following precautions red...

12 – English START AND STOP Control before starting • Check the cutters. Never use cutters that are blunt,cracked or damaged. • Check that the machine is in full working order.Check that all nuts andbolts are tightenedcorrectly. • Check that the cutting attachment always stops when the engine is idl...

English – 13 Carburettor Your Husqvarna product has been designed and manufac-tured to specifications that reduce harmful emissions.After your unit has been run 8-10 tanks of fuel the enginehas broken in. To ensure that your unit is at peak perform-ance and producing the least amount of harmful emis...

14 – English 1 4 2 3 Cooling system To maintain as low operat-ing temperature as possiblethe engine is equipped witha cooling system. The cooling system consistsof:1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder cover (leads cold air...

English – 15 Spark plug The condition of the spark plug is affected by:• An incorrect carburettor setting.• An incorrect fuel mixture (too much or faulty oil).• A dirty air filter.These factors cause deposits on the spark plug electrode thatmay result in malfunction or starting difficulties. If the ...

16 – English MAINTENANCE Weekly maintenance 1 5 3 4 1. Check the starter, the starter cord and thereturn spring. 2. Clean the outside of the spark plug. Remove andcheck the electrode gap.Adjust the gap to 0.5mm or change the sparkplug. 3. Clean the cooling fins on the flywheel. 4. Clean or replace t...

English – 17 225AI15 1,64/26,91,38/351,10/282 70011 200-12 0000,9 kW/ 9 000 rpmYesYes Walbro MB/CDChampion RCJ 7Y0,5 Walbro WT0,85/0,4 11,7/5,3 100 102 5,8/5,67,4/6,0 Type ∅ 130 mm ∅ 150 mm ∅ 200 mm ∅ 250 mm Length 275 mm 225AI25 1,64/26,91,38/351,10/282 70011 200-12 0000,9 kW/ 9 000 rpmYesYes Walbr...

18 – English ´*3-•¶5q¨ EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency),Environment Canada and Husqvarna Forest & Garden arepleased to explain the emissions control system warranty onyour 1999 and later small nonroad engine...