Husqvarna 225AI15/AI25 - Manuals

Page 2 - SYMBOL EXPLANATION; Symbols

2 – English SYMBOL EXPLANATION WARNING! This machine can bedangerous!Careless or incorrect use can result inserious, even fatal injury. Read through the Operator‘sManual carefully and understand thecontent before using the machine. Always use• Ear protection Symbols • This product is in accordance w...

Page 3 - CONTENTS; List of contents

English – 3 CONTENTS List of contents SYMBOL EXPLANATION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS Personal protective equipment .........

Page 4 - The machine’s protective equipment; Personal protective eqipment; SAFETY INSTRUCTIONS; Throttle trigger lock

4 – English The machine’s protective equipment This section describes the machine‘s safety equipment, itsfunction and how checks and maintenance are carried out toensure that it operates correctly. (See the chapter “What iswhat“ to locate where this equipment is positioned on yourmachine.) IMPORTANT...

Page 7 - Fuel safety; General safety instructions; Start

English – 7 IMPORTANT INFORMATION • The machine is solely designed for drilling inice. • Never use the machine if you are tired, if youhave consumed alcohol, or if you are takingmedicines that can affect your sight, yourjudgement or the control of your body. • Use personal protective equipment. See ...

Page 8 - Protective instructions while working

8 – English SAFETY INSTRUCTIONS Safety instructions for using themachine. Protective instructions while working • Always ensure you have a safe and firm workingposition. • Always use both hands to hold the machine. • Make sure that no part of your body comes intocontact with the cuttingattachment wh...

Page 9 - Basic working techniques; Fitting the auger

English – 9 Protective instructions whenwork is completed • The transport guard must always be fitted to the cutting attachment when the machine is not in use. • Ensure the cutting attachment has stopped and remove the spark plug cable from the spark plug before carrying outcleaning, repairs or insp...

Page 10 - What is what on the ice drill?

10 – English 12. Choke13. Allen key 14. Spark plug spanner 15. Blade cover (Transport) 16. Air purge17. Drill 18. Cutter 19. Cutting attachment WHAT IS WHAT? What is what on the ice drill? 1. Operator’s Manual 2. Gearbox3. Loop handle 4. Cylinder cover 5. Starter handle 6. Stop switch7. Throttle tri...

Page 11 - FUEL HANDLING; Fuelling; Gasoline; Fuel mixture; Mixture

English – 11 FUEL HANDLING • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. WARNING!Always provide good ventilation whenhandling fuel. ! Fuelling WARNING!The following precautions red...

Page 12 - START AND STOP; Control before starting; Stop; Start and stop

12 – English START AND STOP Control before starting • Check the cutters. Never use cutters that are blunt,cracked or damaged. • Check that the machine is in full working order.Check that all nuts andbolts are tightenedcorrectly. • Check that the cutting attachment always stops when the engine is idl...

Page 13 - Carburettor; Basic setting; MAINTENANCE; Operation

English – 13 Carburettor Your Husqvarna product has been designed and manufac-tured to specifications that reduce harmful emissions.After your unit has been run 8-10 tanks of fuel the enginehas broken in. To ensure that your unit is at peak perform-ance and producing the least amount of harmful emis...

Page 14 - Cooling system; Muffler

14 – English 1 4 2 3 Cooling system To maintain as low operat-ing temperature as possiblethe engine is equipped witha cooling system. The cooling system consistsof:1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder cover (leads cold air...

Page 15 - Spark plug; Cleaning the air filter; Maintenance schedule; Daily maintenance

English – 15 Spark plug The condition of the spark plug is affected by:• An incorrect carburettor setting.• An incorrect fuel mixture (too much or faulty oil).• A dirty air filter.These factors cause deposits on the spark plug electrode thatmay result in malfunction or starting difficulties. If the ...

Page 16 - Weekly maintenance

16 – English MAINTENANCE Weekly maintenance 1 5 3 4 1. Check the starter, the starter cord and thereturn spring. 2. Clean the outside of the spark plug. Remove andcheck the electrode gap.Adjust the gap to 0.5mm or change the sparkplug. 3. Clean the cooling fins on the flywheel. 4. Clean or replace t...

Page 17 - Technical data; TECHNICAL DATA

English – 17 225AI15 1,64/26,91,38/351,10/282 70011 200-12 0000,9 kW/ 9 000 rpmYesYes Walbro MB/CDChampion RCJ 7Y0,5 Walbro WT0,85/0,4 11,7/5,3 100 102 5,8/5,67,4/6,0 Type ∅ 130 mm ∅ 150 mm ∅ 200 mm ∅ 250 mm Length 275 mm 225AI25 1,64/26,91,38/351,10/282 70011 200-12 0000,9 kW/ 9 000 rpmYesYes Walbr...

Page 18 - EMISSION CONTROL WARRANTY STATEMENT; YOUR WARRANTY RIGHTS AND

18 – English ´*3-•¶5q¨ EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency),Environment Canada and Husqvarna Forest & Garden arepleased to explain the emissions control system warranty onyour 1999 and later small nonroad engine...