Heath Zenith UT-5681-BZ - Manual
Heath Zenith UT-5681-BZ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 2; WARNING: Turn power off at the circuit breaker
- Page 3 – ¿Preguntas o problemas?; CONTENIDOS DEL PAQUETE; LEA TODAS LAS INDICACIONES CON CUIDADO; Instalación del difusor; Figura 1
- Page 4 – Figura 2
- Page 5 – Des questions ou problèmes?; CONTENU DE L’EMBALLAGE; LISEZ AVEC SOIN TOUTES LES DIRECTIVES AVANT; Installation du diffuseur; Figure 1
- Page 7 – ma continúa, llame al; TECHNICAL SERVICE
© 2008 HeathCo LLC
598-1350-01
Compact Fluorescent Dusk-to-
Dawn 42 Watt Security Light
Questions or problems?
Before returning to your retailer, call our
technical service department at 1-800-858-8501 (English speaking
only), 7:30 am to 4:30 pm, CST, Monday – Friday.
PACKAGE CONTENTS
• Security
light
• Bulb
• Wire connectors
• 1/2" NPT coupler
• 1/2" NPT nut
• Lag bolts (x3)
• Mounting
template
INSTALLATION INSTRUCTIONS
Estimated Installation Time: 1 hour
Items needed for installation (not included):
• Phillips and fl athead screwdrivers
• Pliers
• Wire
strippers/cutters
• Safety glasses
• Silicone caulk
• Ladder
• Black
tape
• Conduit
fi tting
Additional item needed for junction box installation (not included):
• Junction box cover with threaded hole (1/2" NPT)
READ ALL INSTRUCTIONS CAREFULLY BEFORE
BEGINNING INSTALLATION.
NOTE:
All wiring must be run in accordance with the National
Electrical Code (Canadian Electrical Code in Canada)
through conduit or another acceptable means. Contact a
qualifi ed electrician if there is any question as to the suit-
ability of the system.
Item
Model
135931
UT-5681-BZ
Lamp in Fixture Contains Mercury. Dispose According
to Local, State, or Federal Laws.
Installation of Diffuser
Note:
It is recommended to install the diffuser before mounting
fi xture to wall or junction box.
1. Place
fi xture upside down on a solid surface.
2. Remove diffuser locking screw from fi xture (see Figure 1).
3. Align the notches in the diffuser with the tabs on the fi xture and
place the diffuser on the fi xture (see Figure 1).
4. Rotate the diffuser clockwise until the diffuser stops (see Figure 1).
5. Install locking screw removed in step 2 (see Figure 1).
Figure 1
Fixture
Fixture Tab
Diffuser
Diffuser Notch
Diffuser
Locking
Screw
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
598-1350-01 2 This fi xture can be directly wall mounted or wall mounted using a weatherproof junction box. Use the instructions below that apply to your application. Installation Without A Junction Box 1. Select a location on a fl at wall with structurally sound wood and from 5 to 25 feet (1.5 to 7...
598-1350-01 3 © 2008 HeathCo LLC 598-1350-01 S Luz de seguridad compacta fl uorescente de 42 vatios para usarla desde el anochecer hasta el amanecer ¿Preguntas o problemas? Antes de devolver el producto al minorista, llame a nuestro departamento de servicio técnico al 1-800-858-8501 (sólo se habla i...
598-1350-01 4 Bombilla Este aparato puede ser instalado sobre la pared sea directamente o usando una caja de empalme contra la intemperie. Use las instruc-ciones abajo indicadas que se apliquen a su uso. Instalación Sin Una Caja de Empalme 1. Escoja un lugar sobre una pared plana y con una buena est...
