Heath Zenith SL-5408 - Manual
Heath Zenith SL-5408 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; Wall Mount
- Page 3 – TEST AND ADJUSTMENT
- Page 4 – TROUBLESHOOTING GUIDE; No Service Parts Available for this Product
- Page 5 – FUNCIONAMIENTO; Resumen de las modalidades del; PRUEBA
- Page 6 – INSTALACION; CONECTE EL CONTROL DE LUZ.; INSTALE EL CONTROL DE LUZ.; Montaje en pared
- Page 7 – PRUEBA Y AJUSTE
- Page 8 – GUIA DE INVESTIGACION DE AVERIAS; SERVICIO TÉCNICO; No hay piezas de servicio disponibles para este producto
- Page 9 – FONCTIONNEMENT; Résumé du mode de commutation
- Page 10 – CÂBLAGE DE LA COMMANDE
- Page 11 – ESSAIS ET RÉGLAGES
- Page 12 – GUIDE DE DÉPANNAGE; SERVICE TECHNIQUE; Aucune pièce de rechange n’est disponible pour ce produit
© 2004 DESA Specialty Products™
595-5292-18
Motion Sensor Light
Control
Model SL-5408
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
Requirements
• The Light Control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some codes require installation by a qualified
electrician.
• This product is intended for use with a junction box
marked for use in wet locations.
• The backplate has knockouts so the sensor can be
mounted on most junction boxes.
• In some applications a universal adaptor plate may be
needed. Adaptors are available at home centers and
electrical supply stores.
Cover
Plate
Light Control
Lamp Holders
Sensor
2 Wire
Connectors
Gasket
4 Mounting
Screws (2 sizes)
This package includes:
Mode:
On-Time:
Works:
Day
Night
Test
5 Sec
x
x
Auto
1, 5, 10 min.
x
Manual
Until Dawn*
x
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
MANUAL MODE
ON-TIME
10 5 1 TEST
10 5 1 TEST
ON-TIME
TEST
... back on.
AUTO
1 Second OFF
then...
Put the ON-TIME switch in the 1, 5, or
10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the ON-
TIME switch in the 1, 5, or 10 position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off
for one second then
back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the
calibration time the control will be in the AUTO mode.
As an ENERGY STAR
®
Partner, Heath
®
/Zenith
has determined that this product meets the
ENERGY STAR
®
guidelines for energy effi-
ciency. This product is ENERGY STAR
®
com-
pliant when used with 120 Watt bulbs.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 595-5292-18 INSTALLATION For easy installation, select an existing light operated bya wall switch for replacement. For best performance, mount the fixture about8 feet (2.4 m) above the ground. W IRE THE L IGHT C ONTROL . For eave mount only: Wall Mount Eave Mount For under eave installation, the s...
3 595-5292-18 Bottom of Sensor ON-TIME 10 5 1 TEST MIN MAX SENS TEST AND ADJUSTMENT NOTE: Sensor has a 1 1 / 2 minute warm up period before it will detect motion. When first turnedon, wait 1 1 / 2 minutes. ❒ Turn on the circuit breaker and light switch. ❒ Turn the SENSITIVITY (SENS) control to the m...
4 595-5292-18 SYMPTOM Lights will not comeon. L i g h t s c o m e o nin daylight. Lights come on forno apparent rea-son. POSSIBLE CAUSE 1. Light switch is turned off.2. F l o o d l i g h t i s l o o s e o r burned out. 3. Fuse is blown or circuit breaker is turned off. 4. Daylight turn-off is in eff...
