Heath Zenith SL-4180/84 - A - Manual
Heath Zenith SL-4180/84 - A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION
- Page 3 – TESTING; SPECIFICATIONS
- Page 4 – TROUBLESHOOTING GUIDE
Mode: On-Time Works: Day Night
Test
5 Sec
x
x
Auto
1, 5 or 10 Min
x
Manual
To Dawn*
x
Accent
3,6 Hr, to Dawn
x
OPERATION
T M
®
Dual Brite™
Motion Sensing
Coach Light
Models SL-4180/84 - A
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during day-
light hours.
Questions? Call 1-800-858-8501
8:00 AM to 4:45 PM Eastern Time,
weekdays.
Lo sentimos, pero no podemos contestar
preguntas en español por teléfono.
Requirements
• The Light Control requires 120 volts AC.
• If you want to use Manual Override, the
control must be wired through a switch.
• Some codes require installation by a
qualified electrician.
This package includes:
Grand
Manor
Tail Assembly
(Lantern & Coach)
Mounting screws
and wire
connectors
Candelabra
or
© Heath Company
Printed in Hong Kong
595-5578
Set the ON-TIME switch
on the bottom of the cover
plate to TEST.
For TEST
TEST 1 5 10 MIN
For MANUAL OVERRIDE
1 Second OFF
then...
For AUTO
Set ON-TIME switch to 1,
5 or 10 minutes.
TEST 1 5 10 MIN
Flip the light switch off for
one second then back on.
M a n u a l o v e r r i d e w o r k s
when the ON-TIME switch
is in any position.
Manual override only works
at night because daylight
returns the sensor to AUTO.
Turn
light
switch
off for 10
seconds
then
back on*
Flip light
switch
off for 1
second
then on
ON-TIME
Switch at
1, 5 or 10
minutes
* Wait one minute for sensor to warm up.
Mode Switching Summary
... back on.
Dusk Accent Mode
Light comes on half bright for selected time
after dusk (Off, 3 hr., 6 hr., until dawn). If
motion is sensed, the light turns on full bright
for the ON-TIME (1, 5 or 10 minutes) then
returns to dim mode.
* resets to Auto Mode at dawn.
TEST
AUTO
MANUAL OVERRIDE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Wiring to Motion Light & Standard Fixture (Standard) Two Motion Lights RED toBLACK BLACK BLACK WHITE WHITE BLACK OPTIONAL WIRING: One Motion Light BLACK WHITE 1. Connect Bare wire to ground screw 3. Black to black 2. White to white Ground Screw Notch Junction Box Screws Fixture Screw Fixture Scr...
The detector is less sensitive to motiondirectly towards it. Sensor Motion Motion Avoid aiming the control at: • Pools of water or objects that change temperature rapidly, such as heatingvents and air conditioners. These heatsources could cause false triggering. • Areas where pets or traffic may tri...
TROUBLESHOOTING GUIDE If you experience a problem, follow this guide. If the problem persists, call theassistance at 1-800-858-8501 8:00 AM and 4:45 PM EST weekdays. SYMPTOM Light will not come on. POSSIBLE CAUSE 1. Light switch is turned off.2. Bulb is loose or burned out.3. Fuse is blown or circui...
