Heath Zenith SH-5512 - Manual

Heath Zenith SH-5512

Heath Zenith SH-5512 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – for proper; Bulb Installation and Replacement; Mode Switching Summary; MANUAL MODE; INSTALLATION; Timer
  • Page 3 – Mount the Light Control; caulk the; Wire the Light Control; WARNING: Turn power off at circuit breaker
  • Page 4 – Motion; Bottom of Sensor; Least Sensitive; TEST AND ADJUSTMENT
  • Page 5 – SPECIFICATIONS; TROUBLESHOOTING GUIDE
  • Page 6 – No Service Parts Available for this Product
  • Page 7 – Requisitos; FUNCIONAMIENTO; Prueba
  • Page 8 – CUIDADO: Para evitar los peligros de incen-; Instalación y Cambio de la Bombilla; NOTA: Si el aparato está instalado a; Resumen de las modalidades del interruptor; PRUEBA; INSTALACION; Luz de Adorno
  • Page 9 – Blanco a Blanco
  • Page 10 – Parte de abajo del detector; Lo menos sensible; PRUEBA Y AJUSTE
  • Page 11 – ESPECIFICACIONES; GUIA DE INvESTIGACION DE AvERIAS
  • Page 12 – de devolver el producto a la tienda.
  • Page 13 – FONCTIONNEMENT; Caractéristiques; Exigences
  • Page 14 – Résumé du mode de commutation; Installation et Remplacement de la; Minuterie D
  • Page 15 – Montage de la Commande D’Éclairage
  • Page 16 – Bas du détecteur; Le moins sensible; ESSAIS ET RÉGLAGES
  • Page 17 – FICHE TECHNIQUE; GUIDE DE DÉPANNAGE
  • Page 18 – avant de retourner l’article au magasin.
Loading the manual

© 2008 HeathCo LLC

598-1160-03

D

ual

B

rite

®

Twin Halogen

Motion Sensing Light

Features

• D

ual

Z

one

™ Technology.

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Bulb Saver™ - Extends bulb life by up to 4x standard

bulbs. Lights bulb to full bright in under 2 seconds.

• D

ual

B

rite

®

Timer.

• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).

Package Contents

Requirements

• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be

wired through a switch.

Some codes require installation by a qualified
electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

Cover

Plate

Light Control

Sensor

3 Wire

Connectors

Gasket

6 Mounting

Screws (3 sizes)

Mounting Bolt

Mounting Strap

Rubber Plug

OPERATION

* resets to Auto Mode at dawn.

TEST

Put ON-TIME switch
on the sensor bottom
to TEST and the D

ual

-

B

rite

®

switch OFF.

MANUAL MODE

ON-TIME

TEST

1 5 20

... back on.

AUTO

1 Second OFF

then...

Note:

When first turned on wait about 1

1

/

2

minutes for

the circuitry to calibrate.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.

Light Shield

Plastic Hanger

2 Halogen Bulbs

Put the ON-TIME switch in the 1, 5,
or 20 minute position.

Mode:

On-Time

Works:

Day Night

Test

5 Seconds

x

x

Auto

1, 5, or 20 Min

x

Manual

To Dawn*

x

Accent

3, 6 Hr, to Dawn

x

TEST 1 5 20

ON-TIME D

ual

B

rite

®

Off 3 6 Dusk to

Dawn

Meets the ENERGY STAR

®

guidelines

when D

ual

B

rite

®

function is off and

ON-TIME is 1 or 5 minutes and when
used with 120 W Max bulbs.

Model SH-5512

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - for proper; Bulb Installation and Replacement; Mode Switching Summary; MANUAL MODE; INSTALLATION; Timer

2 598-1160-03 For easy installation, select an existing light operated by a wall switch for replacement.For best performance, mount the fixture about 8 ft. (2.4 m) above the ground. NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance. CAUTION: ...

Page 3 - Mount the Light Control; caulk the; Wire the Light Control; WARNING: Turn power off at circuit breaker

3 598-1160-03 Mount the Light Control ❒ Place the mounting bolt through the front of the junction box cover. Push the small gasket hole over the mounting screw. ❒ Make sure the wire connectors and wires are inside the junction box. Align the mounting screw with the center hole in the mounting strap....

Page 4 - Motion; Bottom of Sensor; Least Sensitive; TEST AND ADJUSTMENT

4 598-1160-03 Maximum Maximum Range Coverage Angle MAX MIN RANGE ON-TIME DUAL BRITE™ TEST 1 5 20 MINUTES OFF 3 6 DUSK TO DAWN HOUR BO O S T Motion Motion 8 ft. (2.4 m) 70 ft. 100 ft. (21 m) (30.5 m) Boosted Sensor 240° D ual Z one ™ D ual Z one ™ D ual Z one ™ D ual Z one ™ Bottom of Sensor Avoid ai...

Other Heath Zenith Models

All Heath Zenith Other