Heath Zenith PF-4150-PB - Manual
Heath Zenith PF-4150-PB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; WARNING: Turn power off at circuit; Mode Switching Summary; Flip light switch; Recommended Grounding Method; As Shipped
- Page 3 – WIRING; One Motion Light; All wiring should be run in accordance
- Page 4 – OPTIONAL WIRING; Wiring Diagram 1 –; Master; If the dual master wiring is not
- Page 5 – Caulk fixture mounting surface; Optional Assembly; COMPLETE THE INSTALLATION
- Page 6 – TESTING; Least Sensitive
- Page 7 – SPECIFICATIONS; TROUBLESHOOTING GUIDE
- Page 8 – THREE YEAR LIMITED WARRANTY; TECHNICAL SERvICE; If the problem persists, call* for assistance at; No Service Parts Available for this Product
- Page 9 – FUNCIONAMIENTO; ¿Preguntas o problemas?; Características; MODO MANUAL; AUTOMATICO; Prueba
- Page 10 – INSTALACION; Mueva el interruptor de; PRUEBA; Resumen de las modalidades del; Método
- Page 11 – CABLEADO; Tuerza los cables de la caja de empalme
- Page 12 – La conexión inadecuada; CONEXION ALTERNA; Diagrama de Cableado 1 –; Cuando prepare una conexión para controlar un aparato de; Diagrama de Cableado 2 –; Cuando prepare una conexión para controlar otro aparato de; Diagrama de Cableado 1; Maestra
- Page 13 – COMPLETE LA INSTALACION; Montaje Opcional
- Page 14 – Lo menos sensible; Evite apuntar el control hacia:
- Page 16 – GARANTÍA LIMITADA A 3 AÑOS; SERvICIO TÉCNICO; antes de devolver el producto a la tienda.; Si el problema continúa, llame al; No hay piezas de servicio disponibles para este producto.
- Page 17 – FONCTIONNEMENT; ESSAI; Essai; Des questions ou problèmes?; Caractéristiques
- Page 18 – Résumé du mode de commutation; M I S E E N G A R D E : C o u p e z; la plaque de montage.
- Page 19 – CÂBLAGE; Note
- Page 20 – Diagramme de câblage 1; Maître; CÂBLAGE FACULTATIF; Diagramme de câblage 1 –; Câblage d’un luminaire standard : Dénudez le fil rouge du; Diagramme de câblage 2 –; Câblage d’un autre luminaire à détecteur de mouvement (Maître
- Page 21 – COMPLÉTEZ L'INSTALLATION; passage des fils; Ensemble facultatif
- Page 22 – ESSAIS; Le moins sensible; Toute autre
- Page 23 – GUIDE DE DÉPANNAGE; priorité manuelle; FICHE TECHNIQUE
- Page 24 – GARANTIE LIMITÉE DE 3 ANS; Exclusions de la garantie -; SERvICE TECHNIQUE; l’aide avant de retourner l’article au magasin.
© 2007 HeathCo LLC
598-1165-05
ON-TIME
TEST
1 5 10 MIN
Set ON-TIME switch to 1,
5, or 10 minutes.
ON-TIME
Set the ON-TIME switch
on the bottom of the cover
plate to
TEST.
... back on.
1 Second
OFF
then
...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
Note:
When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
MANUAL MODE
AUTO
TEST
1 5 10 MIN
* resets to Auto Mode at dawn.
OPERATION
TEST
Motion Sensing
Coach Lights
Before installation, record the model number
from back of fixture below. Attach receipt in
case of possible warranty issues.
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Items
Models
008812
PF-4150-SC
066300
PF-4150-PB
066494
PF-4150-BK
066565
PF-4160-AB
066579
PF-4162-PB
066580
PF-4170-PB
Questions or problems?
Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
Package Contents
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
• Some Models Include an Optional Decora-
tive Tail Assembly
Requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
•
Some electrical codes require installa-
tion by a qualified electrician.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1165-05 INSTALLATION Estimated Installation Time: 30 minutesItems needed for installation (not included):• Phillips and flathead screwdrivers• Pliers • Wire strippers/cutters • Safety glasses • Light bulb• Silicone caulkFor best performance, mount the fixture about 6 feet (1.8 m) above the gro...
3 598-1165-05 Black to black White to white Recommended Grounding Method Use a green ground “pigtail” (not provided) and twist one end together with the bare fixture wire and the box ground wire. Secure with a wire connector. Secure the other end of the “pigtail” with the GND screw on the mounting p...
4 598-1165-05 OPTIONAL WIRING This fixture is provided with a sensor rated for 500 Watts. Since the fixture is only rated 100 Watts, 400 Watts of additional lighting may be controlled by this sensor.When determining what a fixture is rated for, do not simply look at the rating on the lamp in the fix...
