Heath Zenith ac-29 - Manual

Heath Zenith ac-29 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Figure 2 - Mounting Chime Assembly and Attaching Chime Cover; view a
Page 3 – one year Limited Warranty; Repair service, adjustment and calibration due to misuse, abuse or; technicaL service; If the problem persists, call* for assistance at; no service Parts available for this Product
Page 5 – ubicaciÓn de La camPana; Figura 1 - Acople del conjunto pulsador a la puerta; acoPLe deL conJunto
Page 7 – garantÍa Limitada a 1 aÑo; y no se extiende a; servicio técnico; Si el problema continúa, llame al; no hay piezas de servicio disponibles para este producto.
Page 9 – mise en PLace du cariLLon; Figure 1 = Mise en place du bouton-poussoir sur la porte; instaLLation du bouton-
Page 10 – Figure 2 – Installation du carillon et mise en place du boîtier; Partie a
Page 11 – ACE; garantie Limitée de 1 an; exclusions de la garantie -; Le service de réparation, l’ajustement et l’étalonnage; service technique; Si le problème persiste, composez* le; aucune pièce de rechange n’est disponible pour ce produit.

Loading the manual

598-1225-01

Installation Instructions and Drill Template.
Read and Save these Instructions.
• The non-electric chime mounts directly

through the door and will accommodate
door thicknesses of 3/4" to 2".

• The chime is equipped with a viewer.

Locating the door chime

1. Mount the chime in the center of the door

approximately 4

feet to 5 feet above

the floor.

Note:

Be sure there are no

obstructions on the inside of the door
to interfere with the chime’s baseplate.

2. Using the template provided, mark the

location of the mounting holes parallel
to the edge of the door (see Figure 1).

Note:

It is important that the holes are

parallel to the edge of the door for proper
operation of the chime.

3. Drill two 1" holes parallel to edge of

door.

4. Drill three pilot holes using a 1/16" drill

bit.

Push button assembLy

See Figure 1 for push button assembly.

Note:

If push button assembly is located

in an area that is exposed to rain, caulk
around the 1” holes before attaching push
button to door.

Figure 1 - Attaching Push Button Assembly to Door

attaching Push button

assembLy

1. Remove metal trim screw, metal trim,

name card holder, and name card from
push button assembly to locate mounting
holes (see Figure 1).

2. Insert viewer and push button shaft into

predrilled until push button assembly is
flush against door face. Attach using the
three mounting screws provided (see
Figure 1).

3. Print or type name and address on name

card (provided). Place card in holder
with printing visible through front of card
holder.

4. Place metal trim over push button as-

sembly and name card holder. Secure
trim with trim screw (see Figure 1).

1/16" Pilot Hole

1" Viewer Hole

1" Shaft Hole

Viewer

Push Button Shaft

Push Button Assembly

Mounting Screw

Name Card

Name Card Holder

Metal Trim

Door Edge

Trim Screw

Two-Note

Non-Electric Door

Chime – With Viewer

modeL: ac-29

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Figure 2 - Mounting Chime Assembly and Attaching Chime Cover; view a

2 598-1225-01 mounting chime assembLy 1. Position chime assembly over push button shaft and viewer (see Figure 2). 2. Verify chime assembly is parallel to edge of door. 3. Attach the top and bottom of chime as- sembly securely using mounting screws provided (see Figure 2). oPeration 1. Verify door c...

Page 3 - one year Limited Warranty; Repair service, adjustment and calibration due to misuse, abuse or; technicaL service; If the problem persists, call* for assistance at; no service Parts available for this Product

3 598-1225-01 one year Limited Warranty This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.For a period of one year from the date of purchase, any malfunction caused by factory defective pa...

Page 5 - ubicaciÓn de La camPana; Figura 1 - Acople del conjunto pulsador a la puerta; acoPLe deL conJunto

5 598-1225-01 Campana no eléctrica de dos-notas para puerta - con visor Instrucciones de instalación y plantilla de perforación.Lea y guarde estas instrucciones.• La campana no eléctrica se monta directa- mente en la puerta y se aloja en espesores de puertas de 3/4 a 2 pulgadas. • La campana viene e...