Heath Zenith 6270 - Manual
Heath Zenith 6270 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Mount push button. Use either screws or; double sided tape to mount push button.
- Page 3 – Code and Tune Settings; Code Settings; jumper positions 1 through 7 are used for setting the code.
- Page 4 – Tune Settings
- Page 5 – before returning product to store.; at; No Service Parts Available for this Product
- Page 6 – LIMITED WARRANTY
- Page 7 – Campanilla Decorativa Inalámbrica; Aletas de; Coloque las 3 pilas alkalinas; Análisis de Averías; Figura 1
- Page 8 – Instale el pulsador y el timbre. Use ya; Coloque el colgador sobre el tornillo para montar la campana.
- Page 9 – Programaciones del código y del tono; Programaciones del código
- Page 10 – Programación del tono
- Page 11 – pedir ayuda antes de devolver el producto a la tienda.; puede también escribir a:; No hay piezas de servicio disponibles para este producto.; Información Regulatoria; la autoridad del usuario para el uso de este equipo.
- Page 12 – GARANTÍA LIMITADA; Modelo
- Page 13 – Carillon décoratif sans fil; Pattes de; Installation de la pile alcaline; « Dépannage »; Figure 1
- Page 15 – carillon sur le socle.; Réglages du code et de la mélodie; Réglage du code
- Page 16 – Remplacement de la pile de l’unité de bouton-poussoir
- Page 17 – Dépannage; carillon des planchers.; Service Technique; obtenir de l’aide avant de retourner l’article au magasin.; à portée de main : numéro du modèle, date d’achat et endroit de l’achat.; Aucune pièce de rechange n’est disponible pour ce produit.; Renseignements de règlements
- Page 18 – GARANTIE LIMITÉE; Modèle
- Page 22 – No de modelo / N° de modèle
-
+
-
+
-
+
Battery
Battery
Battery
© 2007 HeathCo LLC
595-5506-11
This package includes (Style of push button and chime may vary from illustra-
tions):
• Wireless chime
• Wireless push button w/battery
• Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use,
alkaline batteries will last up to three years.
6180 Series, 6270 Series, and 6280 Series
Decorative Wireless Chime
Cover
Mounting
Tabs
1. Install alkaline type A23 12
volt push button battery. Re-
move back of case by pushing
in tab on bottom with a small
screwdr iver (see Figure 1).
Make sure battery is oriented
properly (See page 4).
2. Install 3 alkaline “D” batteries.
Make sure batteries are oriented
properly (see Figure 2).
3. Test range. Temporarily posi-
tion chime and push button
where you want them mounted.
Press push button to ver ify
chime and push button work
proper ly. If chime does not
sound, see
Troubleshooting
.
Chime
Volume
Jumpers
Figure 2
Figure 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- 595-5506-11 12345 678 4. Mount push button. Use either screws or double sided tape to mount push button. To mount with screws, remove back of case by pushing in tab on bottom with a small screw-driver.Attach back of case to door jamb or wall. Snap front of push button on.When attaching push butt...
-3- 595-5506-11 Chime with separate cover and base:The chime base can be mounted in two different ways. The base can be mounted using the keyholes or the three mounting holes. The base may be mounted hori-zontally or vertically depending upon the specific model purchased.1. Remove batteries from chi...
-4- 595-5506-11 B a t t e r y B a t t e r y Ba tte ry Ch im e V o lu m e 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 * Code Settings 1-7 Must Match Both Push Button and Chime Inside Push Button Inside Chime Note: Some models might require the use of tweezers to remove and replace the jumpers. Tune Setting Tune ...
