Heath Zenith 6105 - Manual
Heath Zenith 6105 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Typical Installation; make sure there is no wire exposed at; Green; WARNING: Turn power off at the; INSTALLING SENSOR; Removing Control Panel Cover
- Page 3 – MOdE SELECTION SWITCh; Time; COMPLETING INSTALLATION; SPECIFICATIONS
- Page 5 – INSTALACION; Sus características incluyen:; ESCOJA UN LUGAR; Interruptor de
- Page 6 – Instalación típica; asegúrese; AdVERTENCIA: Apague la energía; INSTALACION dEL dETECTOR; Cómo quitar la tapa del panel de control; verde
- Page 7 – INTERRUPTOR SELECTOR dE FASE; AJUSTES; Tiempo; INSTALACION COMPLETA; ESPECIFICACIONES
- Page 8 – GUIA dE SOLUCION dE PROBLEMAS; GARANTÍA LIMITAdA A 5 AÑOS; SERVICIO TÉCNICO; devolver el producto a la tienda.
- Page 9 – INSTALLATION; dÉTERMINER L'EMPLACEMENT; Interrupteur; Ses caractéritisques comprennent:
- Page 10 – Installation type; s’assurer qu’aucun fil; vert; M I S E E N G A R d E : C o u p e r; INSTALLATION dU dÉTECTEUR; Enlèvement du couvercle de la commande
- Page 11 – INTERRUPTEUR dE SÉLECTION dE MOdE; RÉGLAGES; Temps; PARAChÈVEMENT dE
- Page 12 – dÉPANNAGE; SERVICE TEChNIQUE; de retourner l’article au magasin.
Included are:
• The sensor switch
• Cover plate
• 3 wire connectors
• 2 large screws
• 2 small screws.
INSTALLATION
SELECT A LOCATION
The sensor is more sensitive to motion across
the front of the sensor than to motion towards
the sensor.
The detector senses heat in motion and pos-
sibly heat sources that change temperature
quickly. Therefore, to avoid false triggering,
avoid placing the sensor where it will be aimed
at air conditioners, heaters, and other sources
of heat or cold.
30 ft.
(9.1 m)
Features include:
• 150° motion detection angle
• Adjustable on-time from 5 sec. to 20 min.
• Adjustable photocell
• Works with incandescent and rapid start
fluorescent lighting
• Works with motors up to 1/8 hp
• Slide switch selectable OFF, ON, and AUTO modes
AUTO
OFF
ON
The SL-6105 Motion Sensor Wall Switch detects motion to turn on
lights for an adjustable amount of time. A built-in photo cell can be
set to keep lights off when the lights aren’t needed. The unit has excel-
lent sensitivity and a wide 150° detection range. It can be used with
incandescent lighting as well as rapid start fluorescent lighting.
Installation is as easy as replacing a wall switch. However, some
codes require installation by a qualified electrician.
Motion Sensor
Wall Switch
6105
15 ft. (4.6 m)
0
Figure 1 - Typical Plan View of
Coverage
© 2007 HeathCo LLC
595-4881-11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 595-4881-11 Typical Installation 1. Remove existing wall switch from junction box. 2. Connect electrical leads of sensor as shown in Figure 3. Before installing sensor into junction box, make sure there is no wire exposed at each connection. 3. Mount sensor into junction box using two large mounti...
3 595-4881-11 USING MOTION SENSOR WALL SWITCh MOdE SELECTION SWITCh This switch allows you to selects one of three modes of operation: OFF, AUTO, or ON. OFF: Lights stay off. AUTO: Lights automatically come on when motion is detected and the existing light is below the set level. ON: Lights stay on ...
5 595-4881-11 El interruptor de pared y detector de movimiento SL-6105 detecta movimiento y prende la luz por un período de tiempo ajustable. Se puede programar la fotocélula incorporada para que mantenga la luz apagada cuando no se la necesita. La unidad goza de una excelente sensibilidad y de un g...
