Heath Zenith 598-1143-01 - Manual

Heath Zenith 598-1143-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Code and Strobe/Tune Settings
Page 4 – Troubleshooting; Regulatory Information
Page 5 – ONE YEAR LIMITED WARRANTY
Page 9 – Análisis de Averías; Servicio Técnico; Información Regulatoria
Page 10 – GARANTÍA LIMITADA A 1 AÑO
Page 12 – Paramètres de fonctionnement du
Page 14 – Dépannage; Service Technique; Renseignements de règlements
Page 15 – GARANTIE LIMITÉE DE 1 AN

Loading the manual

598-1143-01

Wireless Strobe Chime

This package includes (Style of push button and chime may vary from illustration):
• Wireless strobe chime
• Wireless push button with battery
• Hardware pack

Plug in wireless chime. To reduce

the risk of electrical shock, this equip-
ment has a polarized plug (one blade
is wider than the other). This plug will
fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not attempt to
bypass this safety feature.

Test range. Temporarily position push button where you want it mounted.

Press push button to verify chime and push button work properly. If chime
does not sound, see

Troubleshooting

Install alkaline type A23 12 volt push button battery.
Remove back of case by pushing in tab on bottom with
a small screwdriver. Make sure battery is oriented
properly (see page 3).

DANGER: Electric shock hazard. Do not open chime. No service-

able components inside. If strobe fails to flash, replace chime.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Code and Strobe/Tune Settings

-2- 598-1143-01 Code and Strobe/Tune Settings Code Settings Note: Most installations will not require you to change any jumpers on your chime and push button. WARNING: Disconnect chime unit from power source before opening code access door. Close door and replace screw before reconnecting to power.T...

Page 4 - Troubleshooting; Regulatory Information

-4- 598-1143-01 Troubleshooting Chime does not sound and strobe does not flash:• Make sure push button and chime codes are the same (See pages 2 and 3).• Check orientation of push button battery (See page 3).• Check push button battery charge, replace if necessary.Batteries seem OK, but the chime an...

Page 5 - ONE YEAR LIMITED WARRANTY

-5- 598-1143-01 HeathCo LLC reserves the right to discontinue and to change specifications at any time without notice without incurring any obligation to incorporate new features in previously sold products. ONE YEAR LIMITED WARRANTY This is a “Limited Warranty” which gives you specific legal rights...