Jura 15342 - Manuals

5 Control elements 3 1 2 1 Display 2 Multi-function buttons (button function depends on what is shown in the display) 3 Switch for hot water and steam preparation Service socket for optional JURA Smart Connect

6 Important information Important information The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibil-ity for the ...

7 Important information which is available directly from JURA or from authorised JURA service centres. U Make sure that the E6 and the mains cable are not located close to hot surfaces. U Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges. U Never open and ...

8 Important information A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire: U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged. U Protect the E6 from environmental i...

9 Important information U Switch the machine off with the On/Off but-ton Q if you are going to be absent for a longer period of time and remove the mains plug from the power socket. U Children may not clean or service the machine unless supervised by a responsible person. U Do not allow children to ...

10 1 Preparing and using for the first time 1 Preparing and using for the first time When setting up your E6, please note the following: U Place the E6 on a horizontal surface that is not sensitive to water. U Choose a spot for your E6 which protects the machine against overheating. Ensure that the ...

11 1 Preparing and using for the first time T   You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric...

12 1 Preparing and using for the first time T   Place a receptacle under the fine foam frother and under the coffee spout. T   Remove the water tank and rinse it with cold water. T   Fit the filter cartridge extension supplied on top of the CLARIS filter cartridge Smart. T   Insert the filter cartri...

14 2 Preparation 2 Preparation Basic information about preparing drinks: U The display shows four products you can prepare. Press the ‘ > ’ button to display more products. U During the grinding operation you can select the coffee strength of single products by pressing the ‘ < ’ and ‘ > ’ ...

15 2 Preparation T   Place two cups under the coffee spout. T   Press the ‘Espresso’ button twice (within 1 second). ‘2 x Espresso’ , the preset amount of water flows into the cups. Example:  Proceed as follows to prepare one cappuccino. Precondition:  The start screen is displayed. Milk is connecte...

16 2 Preparation T   Place a cup under the coffee spout and the fine foam frother. T   Press the ‘Caffè Barista’ button. The preset amount of water for coffee flows into the cup. ‘Open switch’ T   Turn the switch to the  § position. Hot water flows out of the fine foam frother. ‘Close switch’ T   Tu...

17 2 Preparation T   Place a cup under the fine foam frother. T   Turn the switch to the  § position. The preset amount of water flows into the cup. ‘Close switch’ T   Turn the switch to the °  position. It is easy to permanently adjust the amount of water for all single products to the cup size. Ad...

18 2 Preparation You can adjust the grinder to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not oper-ating, the grinder adjustment switch could be damaged. T   Only adjust the consistency of grind when the grinder is run- ning. The consistency o...

19 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily . Milk, sparkling mineral water or other liquids can damage the water tank or...

20 3 Daily operation T   Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). T   Remove the milk pipe and rinse it thoroughly under running water. T   Dismantle and rinse the fine foam frother (see Chapter 5 ‘Maintenance – Dismantling and rinsing the fine foam...

21 3 Daily operation If milk has been prepared but you have not started milk sys-tem cleaning, you will first need to rinse the milk system ( ‘Rinse the milk system’  / ‘Open switch’ ). T   Turn the switch to the  § position. ‘Milk system is being rinsed’‘Close switch’ T   Turn the switch to the °  ...

22 4 Permanent settings in programming mode 4 Permanent settings in programming mode Press the ‘ P c ’ button to enter programming mode. You can navi- gate through the programme items and permanently save the required settings using the multi-function buttons. The following settings can be made: Pro...

23 4 Permanent settings in programming mode Product Coffee strength Amount Temperature ‘Espresso doppio’ (2 brewing operations) 8 levels Water: 30 ml – 160 ml normal, high ‘Cappuccino’ 8 levels Water: 25 ml – 240 mlMilk foam: 3 sec. – 120 sec. normal, high ‘Macchiato’ 8 levels Water: 15 ml – 80 mlMi...

24 4 Permanent settings in programming mode By instructing your E6 to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your E6 switches off automatically after the preset time following the last action on the machine. You can set the automatic...

25 4 Permanent settings in programming mode In this programme item you can set the language used by your E6. Example:  Proceed as follows to change the language from ‘English’ to ‘Deutsch’ . Precondition:  The start screen is displayed. T   Press the ‘ P c ’ button. T   Press the ‘ > ’ button sev...

26 5 Maintenance 5 Maintenance Basic information about maintenance: U Press the ‘ P c ’ button to view a list of the maintenance pro- grammes. When the bar is completely filled with red, your E6 will prompt you to perform the appropriate maintenance pro-gramme. U Carry out each maintenance programme...

29 5 Maintenance T   Insert the filter cartridge with its extension into the water tank. T   Turn the filter cartridge clockwise until it audibly clicks into place. T   Fill the water tank with fresh, cold water and reinsert the tank.The machine automatically detects that you have just inserted/chan...

30 5 Maintenance T   Place a receptacle under the coffee spout. T   Press the ‘Next’ button. ‘Machine is being cleaned’ , water flows out of the coffee spout.The operation is interrupted, ‘Add cleaning tablet’ . T   Open the cover of the filler funnel for the cleaning tablet. T   Insert a JURA clean...

31 5 Maintenance If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. T   Clean up any splashes immediately. E The descaling programme lasts approximately 40 minutes. E JURA descaling tablets are available from specialised dealers. Precondition...

32 5 Maintenance T   Empty the receptacle and place it under the fine foam frother and the coffee spout. T   Remove the water tank and rinse it thoroughly. T   Fill the water tank with fresh, cold water and reinsert the tank. ‘Open switch’ T   Turn the switch to the  § position. ‘Machine is being de...

33 5 Maintenance Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Precondition:  ‘Fill bean container’ is displayed. T   Switch the ma...

34 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’). ‘Empty coffee grounds container’ The coffee grounds container is full. Yo...

35 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays out of the fine foam frother. The fine foam frother is dirty. T Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). T Disma...

37 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your E6. It should be used to protect the machine during transport. In order to protect the E6 from frost during transport, the system must be emptied. Precondition:  The sta...

38 9 Technical data 9 Technical data Voltage 220 – 240 V ~, 50 Hz Power 1450 W Conformity mark A Pump pressure static, max. 15 bar Holding capacity of water tank (without filter) 1.9 l Holding capacity of bean container 280 g Holding capacity of coffee grounds container max. 16 portions Cable length...

44 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenTel. +41 (0)62 38 98 233 E You will find additional contact details for your country at www.jura.com . E If you need assistance with using your...