Jura 15177 - User Manual

5 IMPORTANT SAFEGUARDS The appliance is designed and intended for domestic and office use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any respo...

6 IMPORTANT SAFEGUARDS Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative: Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the dishwasher. Z Check voltage to be sure that the vo...

7 IMPORTANT SAFEGUARDS Z Never fill instant coffee, chocolate mix etc. into the bean container or ground coffee funnel (filler funnel for ground coffee). It will damage the functioning of the brewing chamber. Z Never fill sugar coated coffee beans into the bean container. In case of doubt, call your...

8 Control elements Control elements 11 10 4 5 6 8 14 13 12 9 1 2 3 7 J HOT J HOT 1 Cover 2 Filler funnel for cleaning tablet 3 Bean container with aroma preservation cover (lockable) 4 Water tank cover (lockable) 5 Water tank 6 Hot-water spout 7 Power cord (back of the machine) 8 Coffee grounds cont...

9 Control elements 1 2 1 Display 2 Multi-function buttons (button function depends on what is shown in the display) Back of the machine: Service socket for JURA Smart Connect (behind cover) Accessories Spanner for aroma preservation cover, water tank cover and grinder adjustment wheel Container for ...

10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet (www.jura.com). You will find interesting and up-to-date information on your X8 and on every aspect of coffee. When setting up your X8, please note the following: U Place the X8 on a horizon...

11 1 Preparing and using for the first time T   You will then be able to read the degree of water hardness from the discoloration of the Aquadur® test strip and the description on the packaging. Level Display German Degree (°dH) Degrees of general hardness (°dGH) Parts per million (ppm) Indicator St...

13 1 Preparing and using for the first time T   Fill the water tank with fresh, cold water and reinsert the tank. E The machine automatically detects that you have just inserted the filter cartridge. ‘Change the filter’ / ‘Saved’ ‘Filter is being rinsed’ , Water flows directly into the drip tray. Ri...

14 1 Preparing and using for the first time Your X8 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore recommend using a milk cooler or a milk container. T   Connect...

15 2 Preparation 2 Preparation Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T   Use extreme care when handling hot liquid or steam. T   Allow liquid to cool down before drinking. T   In the event of scalding, rinse affected area with cold water and seek medical...

16 2 Preparation Ristretto, espresso, coffee and special coffee are all prepared following this model. For a pot of coffee, you can choose the number of brewing operations (1–5 strokes) in programming mode. Example:  Proceed as follows to prepare one coffee. Precondition:  The start screen is displa...

18 2 Preparation You can adjust the grinder to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment wheel could be damaged. T   Only adjust the consistency of grind when the grinder is running. The consistency of gr...

19 2 Preparation Your X8 allows you to prepare different variants of hot water: U ‘Hot water’ U ‘Hot water for green tea’ There is a danger of scalding from hot water splashes. T   Avoid direct contact with the skin. Example:  Proceed as follows to prepare hot water for green tea. Precondition:  The...

20 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Milk, sparkling mineral water or other liquids can damage the water tank or the ma...

21 3 Daily operation T   Clean the milk system in the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T   Remove the milk pipe and rinse it thoroughly under running water. T   Dismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout...

22 4 Permanent settings in programming mode 4 Permanent settings in programming mode Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T   Use extreme care when handling hot liquid or steam. T   Allow liquid to cool down before drinking. T   In the event of scalding...

24 4 Permanent settings in programming mode Product Coffee strength Amount More settings ‘Latte macchiato’ 10 levels Water: 0.5 oz – 8.0 oz (25 ml – 240 ml)Milk foam: 0 sec. – 120 sec.Milk: 0 sec. – 120 sec.Interval: 0 sec. – 60 sec. Milk and milk foam temperature,Temperature (normal, high),position...

25 4 Permanent settings in programming mode T   Press the ‘ < ’ or ‘ > ’ button to change the setting for the cof- fee strength. T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Coffee’ T   Press the ‘  ’ button for around 2 seconds to exit programming mode. You can repos...

26 4 Permanent settings in programming mode In the program item ‘3/5’ / ‘One-off settings’ you can make the following setting: U ‘Active’ : One-off settings can be made during preparation (e.g. coffee strength or amount of water). U ‘Inactive’ : One-off settings cannot be made during preparation. Th...

27 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘3/5’ T   Press the ‘  ’ button to exit programming mode. In the program item ‘3/5’ / ‘Lock/enable’ you can enable or disable each product individually. Example:  Proceed as follows to d...

28 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘4/5’ T   Press the ‘  ’ button to exit programming mode. The harder the water is, the more frequently the X8 needs to be descaled. It is therefore important to set the water hardness ac...

29 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘4/5’ T   Press the ‘  ’ button to exit programming mode. Example:  Proceed as follows to change the unit for the amount of water from ‘ml’ to ‘oz’ . T   Press the ‘ P c  ’ button. T   P...

31 5 Maintenance 5 Maintenance Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin. T   Keep children AWAY. T   Keep children away from the machine while it is performing a maintenance program. ...

32 5 Maintenance You can start coffee system rinsing manually at any time. T   Place a receptacle under the dual spout. T   Press the ‘ P c  ’ button. T   Press the ‘  T  ’ button. ‘2/5’ T   Press the ‘Rinse the coffee system’ button to start the rinse operation. ‘Machine is rinsing’ , water flows o...

33 5 Maintenance To ensure that the milk system in the dual spout always works prop-erly, you must clean it daily when you have been preparing milk. Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machin...

34 5 Maintenance T   Place the container under the dual spout. T   Remove the milk pipe from the milk container. T   Connect the milk pipe to the container for milk system cleaning. E To connect the milk pipe to the container correctly, the pipe must be fitted with a connector. T   Press the ‘Next’ ...

36 5 Maintenance Your X8 no longer has to be descaled if you are using the CLEARYL Pro Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows. T   Remove the water tank and rinse it with cold water. T   Open the filter h...

37 5 Maintenance T   Insert a new CLEARYL Pro Smart filter cartridge into the water tank, exerting slight pressure. T   Close the filter holder. It will click into place audibly. T   Fill the water tank with fresh, cold water and reinsert the tank. ‘Saved’ appears briefly on the display. The machine...

38 5 Maintenance E The cleaning program lasts approximately 20 minutes. E Do not interrupt the cleaning program. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from specialized dealers. Precondition:  ‘Clean machine’ is displayed. T   Press the ‘ P c  ’ ...

40 5 Maintenance T   Completely dissolve 3 JURA descaling tablets in a receptacle holding 20 oz (600 ml) of water. This may take several minutes. T   Pour the solution into the empty water tank and insert it into the machine. T   Place one receptacle under the dual spout and another under the hot-wa...

41 5 Maintenance Coffee beans may be covered with a slight oil film which remains on the walls of the bean container and on the aroma preservation cover. These traces may negatively affect the coffee result. For this reason, clean the bean container and the aroma preservation cover from time to time...

42 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’). ‘Empty coffee grounds container’ / ‘Empty drip tray’ The coffee grounds c...

43 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout. The dual spout is dirty. T Clean the milk system in the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and r...

44 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your X8. It should be used to protect the machine during transport. In order to protect the X8 from frost during transport, the system must be emptied. T   Place one receptac...

45 9 Technical data 9 Technical data Voltage 120 V ~, 60 Hz Power 1450 W Ambient conditions Humidity max. 80%Ambient temperature 50–95 °F (10–35 °C) Sound pressure level ≤ 70 dB Conformity mark Pump pressure static, max. 15 bar Holding capacity of water tank (without filter) 170 oz(5 l) Holding capa...

48 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenSwitzerland USA : JURA Inc. Canada: FAEMA Customer Service PhoneE-Mail 1-800-220-5701[email protected] 1-(855)-544-8600[email protected] Openin...