Jura 15134 - User Manual

5 Control elements 3 1 2 Front 1 Display 2 Multi-function buttons (button function depends on what is shown in the display) Top of the machine 3 Rotary Switch Accessories Container for milk system cleaning Measuring spoon for ground coffee Filler funnel for ground coffee

6 Important information Important information The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elek-troapparate AG cannot accept any responsibility for the ...

7 Important information U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JUR...

8 Important information U Only connect the machine to the mains volt-age in accordance with the information on the rating plate. The rating plate is located on the underside of your Z6. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). U Connect the Z...

9 Important information People, including children, who U do not have the physical, sensory or mental capabilities to use the machine safely or U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in ho...

10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your Z6 and on every aspe...

11 1 Preparing and using for the first time T   You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. When using the machine for the first time, you can choose whether you want to operate Z6 with or without...

12 1 Preparing and using for the first time T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Insert filter’ E Now decide whether you want to operate your Z6 with or without a CLARIS Smart filter cartridge. Operation with filter cartridge: go straight to the next section (see Cha...

13 1 Preparing and using for the first time ‘Use filter’ / ‘Saved’ ‘Filter is being rinsed’ , the filter is rinsed. The water flows directly into the drip tray. ‘System is filling’ , water flows out of the dual and hot-water spout. ‘Empty drip tray’ T   Empty the drip tray and put it back into the m...

14 1 Preparing and using for the first time T   Remove the water tank and rinse it with cold water. T   Fill the water tank with fresh, cold water and reinsert the tank. ‘System is filling’ , water flows out of the dual and hot-water spout. ‘Machine is heating’‘Machine is rinsing’ , the system is ri...

15 2 Preparation 2 Preparation E You can stop the machine at any time while a speciality coffee or hot water is being prepared. To do this, press the ‘    ’ but- ton. E During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch. E During prepara...

17 2 Preparation Example:  Proceed as follows to prepare two coffees. Precondition:  The start screen is displayed. T   Place two cups under the dual spout. T   Press the ‘Coffee’ button twice (within two seconds) to start preparation of 2 coffees.Coffee preparation starts. The preset amount of wate...

18 2 Preparation You can choose to use a second coffee variety, for example decaf-feinated coffee, with the filter funnel for ground coffee. E Never add more than two level measuring spoons of ground coffee. E Use ground coffee which is not ground too finely. Very fine coffee can block up the system...

19 2 Preparation T   Press the ‘Espresso’ button. Preparation starts. ‘Espresso’ , the preset amount of water for espresso flows into the cup.Preparation stops automatically. ‘Please select product’ appears on the display. It is easy to permanently adjust the amount of water for all single products ...

20 2 Preparation You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not oper-ating, the grinder adjustment switch could be damaged. T   Only adjust the consistency of grind when the grinder is run- n...

21 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. T   Place a receptacle under the dual spout.     T   Press the On/Off button...

22 3 Daily operation Carry out the following maintenance actions regularly or as required: U In the interests of hygiene, we recommend changing the milk pipe and interchangeable milk spout on a regular basis (approximately every 3 months). Replacements are available from specialised dealers. U Clean...

23 4 Permanent settings in programming mode 4 Permanent settings in programming mode Briefly press the Rotary Switch to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi-function but...

24 4 Permanent settings in programming mode In the programme item ‘Product settings’ you can make the follow- ing settings: U ‘Expert mode’ U Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings...

25 4 Permanent settings in programming mode Product Coffee strength Amount More settings Espresso macchiato 10 levels Coffee: 15 ml – 80 mlMilk foam: 0 sec. – 120 sec.Milk: 0 sec. – 120 sec.Interval: 0 sec. – 60 sec. Temperature (low, normal, high),Product name Portion of milk foam,Milk – Milk foam:...

26 4 Permanent settings in programming mode T   Turn the Rotary Switch to change the fill volume setting. T   Press the Rotary Switch to confirm the setting. T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Expert mode’ / ‘Espresso’ T   Press the ‘     button the number of time...

27 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Macchiato’ E You can now change various settings for the product. To do this, briefly press the Rotary Switch to access the various setting options. Confirm the settings by pressing the ‘Save’ button. E If you do not want to c...

28 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. The new product name is displayed. T   Press the ‘     button the number of times needed to display the start screen again. You can choose from ten levels for the milk and milk foam temp...

31 4 Permanent settings in programming mode In the programme item ‘Machine settings’ / ‘Display’ you can set the display brightness (as a percentage). Precondition:  ‘Please select product’ is displayed. T   Press the Rotary Switch. ‘Maintenance status’ T   Turn the Rotary Switch until ‘Machine sett...

32 4 Permanent settings in programming mode In the programme item ‘Machine settings’ / ‘Factory setting’ the machine can be reset to its factory setting: All user settings (apart from the ‘filter’ and ‘water hardness’) are reset to factory settings. Your Z6 then switches off. Precondition:  ‘Please ...

33 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Water tank illumination’ T   Press the ‘     button the number of times needed to display the start screen again. In this programme item you can set the language used by your Z6. Exampl...

35 5 Maintenance 5 Maintenance Your Z6 has the following integrated maintenance programmes: U Rinsing the machine U Rinsing the milk system in the dual spout U Cleaning the milk system in the dual spout ( ‘Clean the milk system’ ) U Changing the filter ( ‘Change the filter’ ) (only if filter is acti...

36 5 Maintenance To ensure that the milk system in the dual spout always works prop-erly, you must clean it daily when you have been preparing milk. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T   Use only original JURA maintenan...

38 5 Maintenance T   Fit the assembled individual parts back in the dual spout and press it firmly. T   Fit the cover of the dual spout. Make sure the cover of the dual spout is correctly fitted. T   Connect the milk pipe to the dual spout. Your Z6 no longer has to be descaled if you are using the C...

39 5 Maintenance E The machine automatically detects that you have just inserted the filter cartridge. ‘Use filter’ / ‘Saved’ ‘Filter is being rinsed’ , the filter is rinsed. The water flows directly into the drip tray. ‘Empty drip tray’ T   Empty the drip tray and put it back into the machine. ‘Use...

40 5 Maintenance ‘Change the filter’ / ‘Saved’ ‘Filter is being rinsed’ , the filter cartridge is rinsed. The water flows directly into the drip tray. ‘Empty drip tray’ T   Empty the drip tray and put it back into the machine. ‘Change the filter’ , ‘Filter rinsing complete’ ‘Please select product’ a...

41 5 Maintenance T   Insert a JURA cleaning tablet into the filler funnel. T   Close the cover of the filler funnel. ‘Press the Rotary Switch’     T   Press the Rotary Switch. ‘Machine is being cleaned’ , water flows out of the dual spout repeatedly.The operation stops automatically. ‘Empty coffee g...

43 5 Maintenance T   Press the Rotary Switch. ‘Machine is being descaled’ , the descaling operation is con- tinued, water flows out of the dual spout and the hot water spout. ‘Empty drip tray’ T   Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select pro...

44 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). ‘Empty coffee grounds container’ The coffee ground...

45 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. The dual spout is dirty. T Make sure the cover of the dual spout is correctly fitted. T Clean the milk system in the dual spout (see Chapter ...

47 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your Z6. It should be used to protect the machine during transport. In order to protect the Z6 from frost during transport, the system must be emptied. Precondition:  ‘Please...

48 9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Conformity mark A Energy consumption ‘Save energy’ / ‘Active’ approx. 6 Wh Energy consumption ‘Save energy’ / ‘Inactive’ approx. 16 Wh Pump pressure static, max. 15 bar Holding capacity of water tank 2.4 l Holding capacity ...

52 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenTel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. The machine complies with the following d...