Page 2 - Your S8
2 Table of contents Your S8 IMPORTANT SAFEGUARDS 4 Control elements 8 1 Preparing and using for the first time 10 JURA on the Internet ....................................................................................................................................10Operation with touchscreen disp...
Page 3 - Symbol description; This symbol means that you are being prompted to
3 Table of contents 5 Maintenance 34 Rinsing the machine ................................................................................................................................... 34Automatic milk system rinsing ..................................................................................
Page 4 - IMPORTANT SAFEGUARDS; Pass them on to any subsequent user.
4 IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS. Pass them on to any subsequent user. When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all ins...
Page 5 - This appliance has a 3-pin grounded plug.
5 IMPORTANT SAFEGUARDS The appliance is designed and intended for household use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility ...
Page 6 - Do not immerse base in water or try to disassemble.
6 IMPORTANT SAFEGUARDS This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative: Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the dishwasher. Z...
Page 7 - NEVER DO
7 IMPORTANT SAFEGUARDS Z Never fill instant coffee, chocolate mix etc. into the bean container or ground coffee funnel (filler funnel for ground coffee). It will damage the functioning of the brewing chamber. Z Never fill sugar coated coffee beans into the bean container. In case of doubt, call your...
Page 8 - Control elements; HOT
8 Control elements Control elements 9 8 3 5 10 7 6 4 2 1 J HOT J HOT 1 Bean container with aroma preservation cover 2 Water tank cover 3 Water tank 4 Power cord (back of the machine) 5 Coffee grounds container 6 Drip tray 7 Touchscreen display 8 Milk system with professional fine foam frother 9 Hei...
Page 9 - Filler funnel cover
9 Control elements 3 1 2 4 5 1 Filler funnel cover 2 Filler funnel for ground coffee 3 Cover cap for grinder adjustment switch 4 Grinder adjustment switch 5 On/Off button Q Accessories Container for milk system cleaning Measuring spoon for ground coffee Hot-water nozzle 6
Page 10 - Preparing and using for the first time; Visit us on the Internet. You can download; JURA on the Internet
10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your S8 and on every aspect...
Page 11 - Level; Filling the bean container; NOTICE
11 1 Preparing and using for the first time Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder. T Only use roasted, untreated coffee beans to fill the bean container. T Remove the aroma preservation cover. T Remove any...
Page 12 - WARNING
12 1 Preparing and using for the first time If the machine is operated with a defective power cord, there is a danger of potentially fatal electric shock. T Never use a machine which is damaged. T Never use a machine which has a defective power cord. Milk, sparkling mineral water or other liquid...
Page 13 - ‘Filter operation’
13 1 Preparing and using for the first time T Place one receptacle under the coffee spout and another under the fine foam frother. T Remove the water tank and rinse it with cold water. T Fit the filter cartridge extension supplied on top of the CLEARYL filter cartridge Smart. T Insert the fi...
Page 14 - Remove the protective cover from the milk system.; Connecting milk
14 1 Preparing and using for the first time Your S8 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore recommend using a milk cooler or a milk container. T Remov...
Page 15 - Preparation; Basic information about preparing drinks:
15 2 Preparation 2 Preparation Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water and seek medical...
Page 16 - Preparation using the start screen:
16 2 Preparation The S8 offers various ways of preparing a specialty coffee, milk or hot water. Preparation using the start screen: Simply touch the desired prod- uct. The following products are displayed as standard on the start screen: ‘Espresso’ ‘Coffee’ ‘2 x Coffee’ ‘Hot water’ ‘Cappuccino’ ‘Lat...
Page 17 - ‘Coffee’
17 2 Preparation Example: Proceed as follows to prepare one coffee. Precondition: The start screen is displayed. T Place a cup under the coffee spout. T Touch ‘Coffee’ . Preparation starts. The preset amount of water for coffee flows into the cup.Preparation stops automatically. The start scre...
Page 18 - ‘Latte macchiato’
18 2 Preparation T Set the selector switch for the professional fine foam frother to the Milk Foam position (see image). T Touch ‘Latte macchiato’ . ‘Latte macchiato’ appears and the preset amount of milk foam flows into the glass. E There is a short interval while the hot milk separates from th...
Page 19 - ‘Milk foam’; Ground coffee
19 2 Preparation T Touch ‘Milk foam’ . The milk foam is prepared. The preset amount of milk flows into the cup.Preparation stops automatically. Your S8 is once more ready for use. To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk ...
Page 20 - during; Adjusting the grinder; Hot water; CAUTION
20 2 Preparation T Touch ‘Espresso’ . Preparation starts. ‘Espresso’ appears and the preset amount of water for espresso flows into the cup.Preparation stops automatically. Your S8 is once more ready for use. You can adjust the grinder to suit the degree of roast of your coffee. If you adjust the ...
Page 22 - Daily; Filling the water tank; Daily maintenance
22 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Milk, sparkling mineral water or other liquids can damage the water tank or ...
Page 23 - regularly; Regular maintenance
23 3 Daily operation T Clean the milk system (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Remove the milk pipe and rinse it thoroughly under running water. T Dismantle and rinse the milk system (see Chapter 5 ‘Maintenance – Dismantling and rinsing the professional fine foam frot...
Page 24 - ‘Clean the milk system’
24 3 Daily operation When the S8 is switched off, the system is automatically rinsed if a specialty coffee has been prepared. If milk has been prepared, you will also be prompted to clean the milk system. T Place one receptacle under the coffee spout and another under the milk system. T Press th...
Page 25 - Permanent settings in programming mode; Explanation
25 4 Permanent settings in programming mode 4 Permanent settings in programming mode Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding...
Page 26 - Product settings
26 4 Permanent settings in programming mode Program item Sub-item Explanation ‘Maintenance status’ ‘Clean the milk system’ , ‘Clean’ , ‘Change filter’ (only if filter is fitted), ‘Descale’ , ‘Rinse’ , ‘Lock display’ , ‘Maintenance information’ T Here you can start the required maintenance program or...
Page 27 - ‘Espresso’
27 4 Permanent settings in programming mode The following settings can be set permanently for all specialty coffees, milk and hot water: Product Coffee strength Amount More settings Ristretto,espresso 10 levels Coffee: 0.5 oz – 2.5 oz (15 ml – 80 ml) Temperature (low, normal, high), product name, de...
Page 28 - Automatic switch-off
28 4 Permanent settings in programming mode T Touch ‘Product settings’ . ‘Espresso’ T Move your finger across the display until ‘Coffee strength’ is displayed in the center. T Now move your finger to the left or right to change the setting for the coffee strength. T Touch ‘Save’ . ‘Saved’ ap...
Page 29 - Operating instructions
29 4 Permanent settings in programming mode U Before you can prepare a specialty coffee, specialty coffee with milk, or hot water, the machine must heat up. U ‘Save energy’ / ‘0’ U All specialty coffees, specialty coffees with milk and hot water can be prepared without having to wait. Example: Proc...
Page 30 - Restore factory settings
30 4 Permanent settings in programming mode T Now move your finger across the controller and set it to ‘0’ . T Touch ‘Save’ . ‘Saved’ appears briefly on the display. ‘Operating instructions’ T Touch ‘Back’ the number of times needed to display the start screen again. In the program item ‘Machi...
Page 31 - Display brightness
31 4 Permanent settings in programming mode T Now move your finger to the left or right to change the setting to ‘oz’ . T Touch ‘Save’ . ‘Saved’ appears briefly on the display. ‘Units’ T Touch ‘Back’ the number of times needed to display the start screen again. In the program item ‘Machine set...
Page 32 - Language
32 4 Permanent settings in programming mode T Touch ‘Machine settings’ . ‘Switch off after’ T Move your finger across the display until ‘Water hardness’ is displayed in the center. T Touch ‘Water hardness’ . ‘Water hardness’ T Now move your finger to the left or right to change the setting. ...
Page 33 - Querying information
33 4 Permanent settings in programming mode In the program item ‘Machine settings’ you can view the following information: U ‘Product counter’ : Number of prepared coffee specialty coffees, specialty coffees with milk and hot water U ‘Maintenance counter’ : Number of maintenance programs performed (...
Page 34 - Maintenance; daily; Rinsing the machine
34 5 Maintenance 5 Maintenance Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin. T Keep children AWAY. T Keep children away from the machine while it is performing a maintenance program. ...
Page 35 - automatically; Cleaning the milk system
35 5 Maintenance T Touch ‘Maintenance status’ . ‘Clean’ T Move your finger across the display until ‘Rinse’ is displayed in the center. T Touch ‘Rinse’ to start the rinse operation. ‘Machine is rinsing’‘Milk system is being rinsed’ The rinse stops automatically. The start screen is displayed. ...
Page 36 - bottom mark
36 5 Maintenance T Touch ‘Clean the milk system’ again. T Touch ‘Start’ . T Touch ‘Start’ again. ‘Milk system cleaner’ / ‘Connect the milk tube’ / ‘Fresh water’ T Remove the milk pipe from the milk container or milk cooler. T Add milk system cleaner to the front part of the container up to...
Page 37 - Inserting the filter
37 5 Maintenance T Dismantle the fine foam frother into its individual parts. T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 8.5 oz (250 ml) cold water and 1 capful of JURA milk system cleaner. Then ...
Page 38 - new; Changing the filter
38 5 Maintenance T Fill the water tank with fresh, cold water and reinsert the tank. E The machine automatically detects that you have just inserted the filter cartridge. ‘Saved’ appears briefly on the display. ‘Filter is being rinsed’ , water flows directly into the drip tray. Rinsing of the filt...
Page 39 - ‘Saved’; Cleaning the machine
39 5 Maintenance T Fill the water tank with fresh, cold water and reinsert the tank. ‘Saved’ appears briefly on the display. The machine has automatically detected that you have just changed the filter cartridge. ‘Filter is being rinsed’ , water flows directly into the drip tray. Rinsing of the fi...
Page 40 - Descaling the machine
40 5 Maintenance Precondition: The start screen is displayed. ‘Clean machine’ is displayed. T Touch ‘Clean machine’ . ‘Clean’ T Touch ‘Clean’ . T Touch ‘Start’ . T Touch ‘Start’ again. ‘Empty coffee grounds container’ T Empty the drip tray and coffee grounds container and put them back in...
Page 41 - empty
41 5 Maintenance Harmful and irritating descaling agent. Harmful if swallowed. Irritating to eyes and skin. T Keep children AWAY. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T After contact with skin, wash immediately with plenty of water. In case of s...
Page 43 - Descaling the water tank
43 5 Maintenance Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLEARYL Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descali...
Page 44 - Display; Message
44 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’). ‘Empty coffee grounds container’ The coffee grounds container is full. Yo...
Page 45 - Troubleshooting; Problem
45 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays out of the fine foam frother. The fine foam frother is dirty. T Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle a...
Page 46 - Transport and environmentally friendly disposal; Disposal
46 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your S8. It should be used to protect the machine during transport. In order to protect the S8 from frost during transport, the system must be emptied. Precondition: The sta...
Page 47 - Technical; Directives
47 9 Technical data 9 Technical data Voltage 120 V ~, 60 Hz Power 1450 W Conformity mark Pump pressure static, max. 15 bar Holding capacity of water tank (without filter) 64 oz (1.9 l) Holding capacity of bean container 10 oz (280 g) Holding capacity of coffee grounds container max. 16 portions Cord...
Page 52 - 1 JURA contact details / Legal information; USA
52 11 JURA contact details / Legal information J73481/S8/US-en/201801 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenSwitzerland USA : JURA Inc. Canada: FAEMA Customer Service PhoneE-Mail 1-800-220-5701[email protected] 1-(855)-544-8600[...