Husqvarna 535RXT - Manuals

• Use clothing made of a strong fabric. Always use heavy, long pants and long sleeves. Do not use loose clothing that can catch on twigs and branches. Do not use jewelry, short pants or sandals. Do not go with bare feet. Put your hair up safely above shoulder level. • Keep first aid equipment near. ...

• Make sure that the engine is cool before you refuel.• Before you refuel, open the fuel tank cap slowly and release the pressure carefully. • Make sure there are sufficient airflow when refueling and mixing fuel (petrol and two-stroke oil) or draining the fuel tank. • Fuel and fuel vapor are highly...

To assemble the handlebar 1. Put the handlebar into the bracket. 2. Make sure that the holes for the knob align.3. Attach the knob but do not tighten fully.4. Adjust the handlebar to put the product in a good operation position. 5. Tighten the knob fully. To assemble the cutting equipment The cuttin...

5. Adjust the shoulder strap until the weight is equal on your shoulders. 6. Adjust the height of the suspension point. For forestry clearing, the correct height of the suspension is approximately 10 cm below your hip. Refer to Correct balance of the product on page 16. Quick release function of the...

head and cutting attachment guard if they have been hit or if they have cracks. Fuel This product has a two-stroke engine. CAUTION: Incorrect type of fuel can result in engine damage. Use a mixture of gasoline and two-stroke oil. Gasoline CAUTION: Always use a quality gasoline/oil mixture of at leas...

1. Fill half the quantity of the gasoline to be used.2. Add the full quantity of oil and mix (shake) the fuel mixture. 3. Add the remaining quantity of gasoline.4. Carefully mix (shake) the fuel mixture and fill the fuel tank of the product. 5. Empty and clean the fuel tank if you do not use the pro...

blade thrust. The risk increases with the thickness of the branch that is cut. General work instructions WARNING: Be careful when you cut a tree that is in tension. It can spring back to its normal position before or after the cut and hit you or the product, and cause injury. • Clear an open space a...

3. Pull the saw blade forward with a fast movement. To fell large trees Large trees must be cut from 2 sides.1. Examine in which direction the tree will fall.2. Apply full throttle.3. Do the first cut on the side of the tree to which it will fall. 4. Cut through the tree from the other side. CAUTION...

• Keep the support cup with a light pressure against the ground to make sure that the grass blade does not hit the ground. • Obey these instructions to decrease the risk that cut material winds around the grass blade:a) Apply full throttle.b) Do not move the grass blade through cut material when you...

3. Move the product from side to side when you cut grass. Use full speed. To sweep the grass The airflow from the rotating trimmer line can be used to remove cut grass from an area.1. Hold the trimmer head and the trimmer line parallel to the ground and above the ground. 2. Apply full throttle.3. Mo...

Troubleshooting The engine does not start Check Possible cause Procedure Stop switch. The stop switch is in the stop posi- tion. Let an approved service agent re- place the stop switch. Starter pawls. The starter pawls cannot move free- ly. Remove the starter cover and clean around the starter pawls...

• In order to prevent unintentional start of the engine, the spark plug cap must always be removed during long-term storage if the product is not under close supervision and when you perform all service measures. • Allow the product to cool before you put in storage. Disposal • Obey the local recycl...

535RX 535RXT Sound levels 2 Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 11806 and ISO 22868, dB(A): Equipped with trimmer head (original) 95 95 Equipped with grass blade (original) 95 95 Vibration levels 3 Equivalent vibration levels (a hv,eq ) at handles, mea...

Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares on our sole responsibility that the product: Description Brush cutters Brand Husqvarna Type/Model 535RX, 535RXT Identification Serial numbers dating from 2022 and onward...

UK Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares on our sole responsibility that the product: Description Brush cutters Brand Husqvarna Type / Model 535RX, 535RXT Identification Serial numbers dating from 2022 and onwards complies fully with th...

GENERAL SAFETY PRECA UTIONS 6 – English Impor tant Personal protective equipment HELMET A helmet should be w orn if the trees being cleared are taller than 2 m. HEARING PROTECTION Wear hearing protection that provides adequate noise reduction. EYE PROTECTION Always wear approved eye protection. If y...

GENERAL SAFETY PRECA UTIONS English – 7 GLO VES Gloves should be worn when necessary, e.g., when fitting cutting attachments. BOOTS Wear boots with steel toe-caps and non-slip sole. CLOTHING Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always we...

GENERAL SAFETY PRECA UTIONS 8 – English be chec ked. See instructions under the heading Maintenance. Stop s witch Use the stop s witch to switch off the engine. Start the engine and make sure the engine stops when you move the stop switch to the stop setting. Cutting attac hment guard This guard is ...

GENERAL SAFETY PRECAUTIONS English – 9 Quick release There is an easily accessible, quick release fitted at the front as a safety precaution in case the engine catches fire, or in any other situation that requires you to free yourself from the machine and harness. See instructions under the heading ...

GENERAL SAFETY PRECAUTIONS 10 – English Locking nut A locking nut is used to secure some types of cutting attachment. When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attach...

GENERAL SAFETY PRECAUTIONS English – 11 General rules Only use cutting attachments with the guards we recommend! See the chapter on Technical data. Keep the teeth of the blade correctly sharpened! Follow our instructions and use the recommended file gauge. An incorrectly sharpened or damaged blade i...

GENERAL SAFETY PRECAUTIONS 12 – English round file. The top edges must be filed down by the same amount for all the teeth. • Adjust the blade setting. This should be 1 mm. Trimmer head • Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a pa...

ASSEMBLY English – 13 Assembling the handlebar and throttle • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar, (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar. • Refit the screw in the h...

ASSEMBLY 16 – English Adjusting the harness and brush cutter Standard harness Quick release At the front is an easily accessible, quick release. Use this if the engine catches fire or in any other emergency situation that requires you to free yourself from the machine and harness. Spreading the load...

ASSEMBLY English – 17 2 Tighten the chest strap under your left arm so that it fits closely around your body. 3 Adjust the shoulder strap to distribute the load evenly across your shoulders. Press downwards on the suspension hook to load the harness. 4 Adjust the height of the suspension hook as des...

FUEL HANDLING 18 – English Fuel safety Never start the machine: 1 If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. 2 If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. U...

FUEL HANDLING English – 19 Mixing • Always mix the gasoline and oil in a clean container intended for fuel. • Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the f...

STARTING AND STOPPING 20 – English Check before starting • Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that th...

STARTING AND STOPPING English – 21 Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord...

WORKING TECHNIQUES 22 – English General working instructions Basic safety rules 1 Look around you: • To ensure that people, animals or other things cannot affect your control of the machine. • To ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects...

WORKING TECHNIQUES 24 – English Forestry clearing using a saw blade • The risk of blade thrust increases with increasing stem size. You should therefore avoid cutting with the area of the blade between 12 o’clock and 3 o’clock. • To fell to the left, the bottom of the tree should be pushed to the ri...

WORKING TECHNIQUES English – 25 still difficult to gain access, cut the stems high up and let them fall. This will reduce the risk of jamming. Grass clearing using a grass blade • Grass blades and grass cutters must not be used on woody stems. • A grass blade is used for all types of tall or coarse ...

MAINTENANCE English – 27 Carburetor Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. To ensure that it continues to run at peak performance and to minimise harmful exhaus...

MAINTENANCE 28 – English 4 If the start throttle speed is too high, turn the adjuster screw A anticlockwise until the cutting attachment stops. Then turn adjuster screw A clockwise a further 1/2 turn. Muffler CAUTION! Some mufflers are fitted with a catalytic converter. See chapter on Technical data...

MAINTENANCE English – 29 Air filter The air filter must be regularly cleaned to remove dust and dirt in order to avoid: • Carburettor malfunctions • Starting problems • Loss of engine power • Unnecessary wear to engine parts • Excessive fuel consumption. Clean the filter every 25 hours, or more regu...

30 – English MAINTENANCE Maintenance schedule The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this manual. More extensive work must...

English – 31 TECHNICAL DATA Technical data NOTE! This spark ignition system complies with the Canadian standard ICES-002. Note 1 Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB (A). Note 2: Reported data for equivale...

FEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT English – 33 YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (U.S. Environmental Protection Agency), CARB (California Air Resources Board), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control syste...

FEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT 34 – English EMISSION WARRANTY PARTS LIST 1 Carburetor and internal parts 2 Intake pipe, airfilter holder and carburetor bolts. 3 Airfilter and fuelfilter covered up to maintenance schedule. 4 Spark Plug, covered up to maintenance schedule ...

1 2 3 4 5 6 7 8 9 3 5-50 NM ~ 15 cm 6' "Clic" ~ 3 ,5 m 11' 7,0 m 2 3 ' 2,4- 3 , 3 mm .095"-.1 3 0" 12 cm 5" Trimmy SII

Original instructions ´®z+V!o¶5:¨ ´®z+V!o¶5:¨ 2010-11-22 1154017-95