Transition Networks SSETF10XX-200 - Manual
Transition Networks SSETF10XX-200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing the Cable; FIBER; INSTALLATION; Power the Media Converter; OPERATION; Using Status LEDs
- Page 3 – CABLE SPECIFICATIONS; Fiber Cable; Copper Cable; TECHNICAL SPECIFICATIONS; Power Supply DC Output:
- Page 4 – collision domain; FAULT ISOLATION and CORRECTION; YES
- Page 5 – CONTACT US
- Page 6 – COMPLIANCE INFORMATION; FCC Regulations
USER’S GUIDE
SSETF10xx-200
Stand-Alone Media Converter
• Ethernet™ and Fast Ethernet™
• 10Base-T / 100Base-TX to
10Base-FL / Base-SX
TRANSITION Networks SSETF10xx-200
s e r i e s E t h e r n e t ™ a n d F a s t E t h e r n e t ™
Media Converters connect 10Base-T or
1 0 0 B a s e T X s h i e l d e d o r u n s h i e l d e d
twisted-pair copper cable to 10Base-FL or
100Base-SX fiber-optic cable.
* Typical maximum cable distance. (Actual distance is dependent upon the
physical characteristics of the network installation.)
Optional Accessories
(sold separately)
Installation . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . .4
Cable Specifications . . . . . . . . . . .5
Technical Specifications . . . . . . . .6
Half-Duplex Network . . . . . . . . . .7
Fault Isolation and Correction . . .8
Contact Us . . . . . . . . . . . . . . . . .10
Compliance Information . . . . . . .11
Part Number
Port One -
Copper
10Base-T/100Base-TX
Port Two -
Fiber-Optic
10Base-FL/100Base-SX
SSETF1011-200
RJ-45
100 m (328 ft)*
ST, 850 nm multimode
2 km (1.2 mi)* @ 10 Mb/s
300 m (980 ft)* @ 100 Mb/s
SSETF1013-200
RJ-45
100 m (328 ft)*
SC, 850 nm multimode
2 km (1.2 mi)* @ 10 Mb/s
300 m (980 ft)* @ 100 Mb/s
Part Number
Description
E-MCR-03
12-Slot Media Converter Rack (includes universal internal power
supply) 17 x 15 x 5 in. (432 x 381 x 127 mm)
WMBP
Optional Wall Mount Brackets
Length: 5.0 in (127 mm) Fits converter length: 4.716 in. (120 m)
SPS-1872-SA
Optional External Power Supply; 18-72VDC Stand-Alone Wide-
Input; Output: 12.6VDC, 1.0 A
SPS-1872-PS
Optional External Power Supply; 18-72VDC Piggy-Back Wide-
Input; Output: 12.6VDC, 1.0 A
2
SSETF10xx-200
Tech Support:
800-260-1312
International:
952-941-7600
7am-6pm CST (GMT-6:00)
Product Features
Full-Duplex / Half-Duplex
The SSETF10xx-200 receives and transmits network signals in either full-
duplex or half-duplex mode (depending upon the network devices to which
the Media Converter is attached).
Fast Ethernet™ in
full-duplex
mode allows the maximum cable distances
listed on page 1.
Fast Ethernet™ in
half-duplex
mode requires attention to the 512-bit Rule
(See page 7).
LinkAlert
The SSETF10xx-200 series Media Converter
LinkAlert™
feature allows the
Media Converter to pass 10Base-T/100Base-TX-side link faults over the link to
the 10Base-T/100Base-SX side and to pass 10Base-FL/100Base-SX-side link
faults over the link to the 10Base-FL/100Base-TX side.
If the SSETF10xx-200 Media Converter does not detect a good link on the
10Base-T/100Base-TX side, the Media Converter disables all transmission
(including active-idle) on the 10Base-FL/100Base-SX side.
AutoCross*
The
AutoCross™
feature allows either straight-through (MDI) or crossover
(MDI-X) cables to be used when connecting to 10Base-T or to 100Base-TX
devices, such as hubs, transceivers, or network interface cards (NICs).
AutoCross determines the characteristics of the cable connection and
a u t o m a t i c a l l y c o n f i g u r e s t h e u n i t t o l i n k u p , r e g a r d l e s s o f t h e c a b l e
configuration.
Auto-Negotiation*
The SSETF10xx-200 series Media Converter
Auto-Negotiation™
feature
allows the Media Converter to be used with 10Base-T, 100Base-TX, 10Base-
FL and 100Base-SX ports. Using Auto-Negotiation, the Media Converter brings
up the copper and fiber links in the highest speed and mode possible for all
the attached network devices.
NOTE:
The SSETF10xx-200 series Media Converter does NOT support rate
conversion between 10Mb/s and 100Mb/s network devices.
*Requires no operator intervention.
10Base-T or
100Bas-TX
Device
Media Converter
LINK FAULT INDICATION
10Base-FL or
100Base-SX
Device
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
[email protected] -- Select the “Transition Now” Link for a Live Web Chat 3 INSTALLATION Installing the Cable FIBER 1. Locate or build 10Base-FL or 100Base-SX compliant fiber cable withmale, two-stranded TX to RX connectors installed at both ends. 2. C o n n e c t t h e f i b e r c a b l e ...
[email protected] -- Select the “Transition Now” Link for a Live Web Chat 5 CABLE SPECIFICATIONS The physical characteristics must meet or exceed IEEE 802.3™ specifications. Fiber Cable Bit Error Rate: <10-9 Multimode fiber (recommended): 62.5/125 µm Multimode fiber (optional): 100/140, ...
[email protected] -- Select the “Transition Now” Link for a Live Web Chat 7 HALF-DUPLEX NETWORK 512-Bit Rule In a half-duplex network, the maximum cable lengths are determined by theround trip delay limitations of each Fast Ethernet™ collision domain . (A collision domain is the longest pat...
