Transition Networks SPOEB10XX-100 - Manual
Transition Networks SPOEB10XX-100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Set the configuration switches; Eight-position configuration switch
- Page 3 – Additional features
- Page 4 – Installation- Continued; Automatic Link Restoration; Installing fiber cables; Connecting power; Install the copper cable
- Page 5 – SPOEB10xx-1xx media converter; Operation; Status LEDs; LED
- Page 6 – Cable Specifications; Copper cable
- Page 7 – Technical Specifications; Troubleshooting; YES
- Page 8 – Declaration of Conformity; Contact Us
- Page 9 – Compliance Information; FCC Regulations
SPOEB10xx-100
User’s Guide
• Stand-Alone Media Converter
• Power Over Ethernet
• 10/100Base-TX to 100Base-FX
The SPOEB10xx-1xx Power over Ethernet (POE)
is a two port 10/100Base-TX to 100Base-FX media converter capable of providing
power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media
Dependent Interface (MDI) twisted pair cable. The SPOEB10xx-100 emulates Power
Sourcing Equipment (PSE) and provides power via the 10/100Base-TX interface for a
remote PD device that complies with the IEEE802.3af™ standard.
Installation . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . .9
Cable Specifications . . . . . .10
Technical Specifications . . .12
Troubleshooting . . . . . . . . .13
Contact Us . . . . . . . . . . . . .15
Compliance Information . . .16
Part Number
Port Two - Duplex Fiber-Optic
100Base-FX
SPOEB1011-100
RJ-45
100 m
(328 ft.)*
ST, 1300 nm multimode
2 km
(1.2 miles)
SPOEB1013-100
RJ-45
100 m
(328 ft.)*
SC, 1300 nm multimode
2 km
(1.2 miles)
SPOEB1014-100
RJ-45
100 m
(328 ft.)*
SC, 1310 nm single mode
20 km
(12.4 miles)
SPOEB1015-100
RJ-45
100 m
(328 ft.)*
SC, 1310nm single mode
40 km
(24.9 miles)
SPOEB1016-100
RJ-45
100 m
(328 ft.)*
SC, 1310 nm single mode
60 km
(37.3 miles)
SPOEB1017-100
RJ-45
100 m
(328 ft.)*
SC, 1550 nm single mode
80 km
(49.7 miles)
*Cable distances are the typical maximum distances. Actual distance is
dependent upon the physical characteristics of the network installation.
Port One - Copper
10/100Base-TX
SPOEB1035-100
RJ-45
100 m
(328 ft.)*
SC, 1310 nm single mode
120 km
(74.6 miles)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 SPOEB1029-100 RJ-45100 m (328 ft.)* SC, 1310Tx/1550Rx nm single mode20 km (12.4 miles) SPOEB1029-101 RJ-45100 m (328 ft.)* SC, 1550Tx/1310Rx nm single mode20 km (12.4 miles) Part Number DescriptionWMBL Wall...
4 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- continued Eight-position configuration switch -- continued 2 - Speed Up - Forces 100 Mb/s on the copper port. Down - Forces 10 Mb/s on the copper port. (Only when Auto-Negotiation is disable...
6 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation- Continued Far-End Fault (always enabled) This troubleshooting feature generally used in conjunction with Link PassThrough to notify both end devices of a link loss. If the fiber RX signal is l...
