Transition Networks SISTF10XX-140-LR(T) - Manual
Transition Networks SISTF10XX-140-LR(T) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Part Number; Part Number
- Page 3 – Ground the Ethernet Switch; Installation; Install the Fiber Cable; Install the Copper Cable
- Page 4 – Set the Port Alarm Switches; Install the Port Alarm Device; Please note the following when wiring the network:
- Page 5 – Power the Ethernet switch; WARNING: EXPLOSION HAZARD; AutoCross; Operation; Features; Switching and Address Learning
- Page 6 – Status LEDs; Power and Fault LEDs; Fiber Port LEDs; Copper Port LEDs
- Page 7 – Extended Temperature Models; Cable Specifications; Fiber Cable; Standard Models
- Page 8 – Copper Cable; OR; Technical Specifications
- Page 9 – Technical Specification; Troubleshooting; ON; YES
- Page 10 – Contact Us
- Page 11 – Compliance Information; FCC Regulations
User’s Guide
SISTF10xx-140-LR(T)
SISTF10xx-160-LR(T)
SISTF10xx-170-LR(T)
Stand-Alone Ethernet Switch
• 10Base-T / 100Base-TX to 100Base-FX
• Extended Temperature
• Hazardous Environment
* T y p i c a l m a x i m u m c a b l e d i s t a n c e .
Actual distance is dependent upon the
physical characteristics of the network
installation.
Installation . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . .12
Technical Specifications . . . . . . .15
Troubleshooting . . . . . . . . . . . . .17
Compliance Information . . . . . . .20
Part Number
Ports 1 - 4:
Copper
10Base-T/100Base-TX
Port 5:
Duplex Fiber-Optic
100Base-FX Duplex
SISTF1011-140-LR
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SISTF1012-140-LR
RJ-45
100 m (328 ft)*
ST, 1310 nm single mode
15 km (9.3 miles)*
SISTF1013-140-LR
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SISTF1014-140-LR
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
15 km (9.3 miles)*
SISTF1011-140-LRT
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SISTF1012-140-LRT
RJ-45
100 m (328 ft)*
ST, 1310 nm single mode
15 km (9.3 miles)*
SISTF1013-140-LRT
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SISTF1014-140-LRT
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
15 km (9.3 miles)*
Extended Temperature Models: -40°C to 75°C (-40°F to 167°F):
Standard Temperature Models: 0°C to 60°C (32°F to 140°F):
T r a n s i t i o n N e t w o r k s i n d u s t r i a l E t h e r n e t s w i t c h
c o n n e c t s 1 0 B a s e - T / 1 0 0 B a s e - T X t w i s t e d - p a i r
copper cable to 100Base-FX fiber-optic cable. It is
designed for harsh industrial environments and is
a l s o a v a i l a b l e i n m o d e l s t h a t o p e r a t e i n e i t h e r
standard or extended temperature ranges.
The
SISTF10xx-140-LR(T)
model includes four (4) copper RJ-45 ports and one (1)
duplex fiber-optic port.
SISTF10xx-140-LR(T)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation. Part Number Ports 1 - 6: Copper 10Base-T/100Base...
4 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 NOTE: The Ethernet switch is intended to be grounded to a well- grounded mounting surface such as a metal plate. Install the groundingwire prior to connecting any other devic...
6 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Set the Port Alarm Switches The port alarm feature is used to determine faults at the copper or fiber ports.The dip switches are located on the top ...
