Transition Networks SGETF1017-100 - Manual

Transition Networks SGETF1017-100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at the user’s own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on
the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique
édicté par le ministère des Communications du Canada.

European Regulations

Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Achtung !
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes
Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für entsprechende Gegenmaßnahmen
werantwortlich ist.
Attention !
Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des
interférences radioélectriques, il appartiendra alors à l’utilsateur de prende les measures spécifiques
appropriées

Trademark Notice

All registered trademarks and trademarks are the property of their respective owners.

Copyright Restrictions

© 2001 TRANSITION Networks.
All rights reserved. No part of this work may be reproduced or used in any form or by any means –
graphic, electronic, or mechanical – without written permission from TRANSITION Networks.
Printed in the U.S.A.

33197.C

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE
PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in
damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten
verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG
zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über
Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer
Konformität.

TRANSITION Networks SGETF10xx series Gigabit Ethernet

™

media converters

connect 1000BASE-TX shielded or unshielded twisted-pair copper cable to
1000BASE-SX or 1000BASE-LX

multimode or singlemode

fiber-optic cable.

1000BASE-TX to 1000BASE-SX/LX

Media Converters

SGETF10xx-100

USER’S GUIDE

1000BASE-SX/LX Fiber

1000BASE-T Copper

9-12 VDC

INPUT

Ethernet

1000BaseT

1000BaseSX/LX

Media

Converter

1000Base-SX/LX

1000Base-T

SGETF1013-100

Provides an RJ-45 twisted-pair copper
1000BASE-T connector and an RX
(receive) and TX (transmit) SC connector
to 850 nm 1000BASE-SX multimode
fiber-optic cable.

SGETF1014-100

Provides an RJ-45 twisted-pair copper
1000BASE-T connector and an RX
(receive) and TX (transmit) SC connector
to 1300 nm 1000BASE-LX singlemode
fiber-optic cable.

SGETF1015-100

Provides an RJ-45 twisted-pair copper
1000BASE-T connector and an RX
(receive) and TX (transmit) SC connector
to 1300 nm 1000BASE-LX singlemode
fiber-optic cable.

SGETF1017-100

Provides an RJ-45 twisted-pair copper
1000BASE-T connector and an RX
(receive) and TX (transmit) SC connector
to 1550 nm 1000BASE-LX singlemode
fiber-optic cable.

SGETF1018-100

Provides an RJ-45 twisted-pair copper
1000BASE-T connector and an RX
(receive) and TX (transmit) MT-RJ
connector to 850 nm 1000BASE-SX
multimode fiber-optic cable.

SGETF1025-100

Provides an RJ-45 twisted-pair copper
1000BASE-T connector and an RX
(receive) and TX (transmit) MT-RJ
connector to 1300 nm 1000BASE-LX
singlemode fiber-optic cable.

SGETF10xx in the Network . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . .4
Fault Isolation and Correction . . . . .5
Cable Specifications . . . . . . . . . . . . .6
Technical Specifications . . . . . . . . . .7
Compliance Information . . . . . . . . . .8

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Set 4-Position Switch; TECHNICAL SPECIFICATIONS

SGETF10xx IN THE NETWORK Install two SGETF10xx series media converters in series to extend, over fiber,the distance between two 1000BASE-TX devices. Use one SGETF10xx media converter to connect a 1000BASE-TX terminaldevice and a 1000BASE-SX/LX hub, switch, or router. NOTE: A TRANSITION Networks stan...

Page 3 - CABLE SPECIFICATIONS; Fiber Cable

CABLE SPECIFICATIONS Fiber Cable MULTIMODE Fiber Optic Cable Recommended: 62.5 / 125 µm multimode fiber Optional: 100 / 140 µm multimode fiber85 / 125 µm multimode fiber50 / 125 µm multimode fiber SGETF1013 850 nM Fiber Optic Transmitter Power: min: -10.0 dBm max: -4.0 dBm Fiber Optic Receiver Sensi...

Page 4 - OPERATION; Using Status LEDs; FAULT ISOLATION and CORRECTION; YES

OPERATION Using Status LEDs Use the status LEDs to monitor media converter operation in the network. P(o)W(e)R Steady LED indicates connection toexternal AC power. RXF (Fiber receive) Flashing LEDindicates reception of data on fiberlink. LKF (Fiber link) Steady LED indicatesfiber link connection. RX...