Transition Networks SBFTF10XX-15X - Manual
Transition Networks SBFTF10XX-15X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Set the 4-Position Switch; Installation; Set the Jumper
- Page 3 – Install the Twisted-Pair Copper Cable; Install the Fiber Cable; Operation; Power the Media Converter
- Page 4 – Product Features; AutoCrossTM; Product Features - Continued; Cable Specifications; Copper Cable
- Page 5 – Fiber Cable; Technical Specifications
- Page 6 – Troubleshooting; YES; YES; YES; Contact Us
- Page 7 – Compliance Information; FCC Regulations
User’s Guide
SBFTF10xx-15x
Stand-Alone Media Converter
•
Copper to Fiber
•
10/100 Bridging (2-Port)
•
10Base-T/100Base-TX to 100Base-FX
The SBFTF10xx-15x 2-port Ethernet/Fast Ethernet
b r i d g i n g m e d i a c o n v e r t e r c o n n e c t s 1 0 B a s e - T
Ethernet or 100Base-TX Fast Ethernet twisted-pair
copper network devices to network devices on a
100Base-FX Fast Ethernet fiber network.
SBFTF1029-150
**
RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 20 km (12.4 miles)*
SBFTF1029-151**
RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 20 km (12.4 miles)*
SBFTF1029-152***
RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 40 km (24.8 miles)*
SBFTF1029-153***
RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 40 km (24.8 miles)*
Part Number
Port One -
Copper
10Base-T/100Base-TX
Port Two -
Duplex Fiber-Optic
100Base-FX
SBFTF1011-150
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1013-150
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1014-150
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
20 km (12.4 miles)*
SBFTF1015-150
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
40 km (24.8 miles)*
SBFTF1018-150
RJ-45
100 m (328 ft)*
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
*
Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network. (TX) = transmit (RX) = receive
** SBFTF1029-
150
and SBFTF1029-
151
are intended to be installed in the same
network where one is the
local
converter and the other is the
remote
converter.
*** SBFTF1029-
152
and SBFTF1029-
153
are intended to be installed in the
same network where one is the
local
converter and the other is the
remote
converter.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .9
Troubleshooting . . . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch. Failure to observe this caution could result in damage to, and subsequent fa...
RJ-45 port on the other device (switch, work station, etc.) RJ-45 port on the media converter 4 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Install the Twisted-Pair Copper Cable 1. Locate or build 10Base-T or 100Base-TX copper cables with male, RJ-45co...
6 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation - Continued Product Features Auto-Negotiation The Auto-Negotiation feature allows the media converter to automaticallyconfigure itself to achieve the best possible mode of operation over a link.Th...
