Transition Networks NFXEXXX01 - Manual
Transition Networks NFXEXXX01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Checklist; • Fast Ethernet; Description; Turn OFF power to the PC or file server and unplug the power cord.; N-FXE Series Fast Ethernet NICs; Disconnect any antistatic devices.; Network remote boot configuration; are connected via a jumper, as shown below.
- Page 3 – Cable Specifications; Fiber cable; Technical Specifications
- Page 4 – Troubleshooting; Diagnostics LEDs and Boot ROM; Declaration of Conformity; LED; FDX; Contact Us; Technical support; Technical support is available at [email protected]; Transition now; Transition Networks
- Page 5 – Compliance Information; FCC regulations
USER’S GUIDE
N-FXE-xxx-01, 100Base-FX Fiber
Adaptor NIC Cards
•
PCI-Express x1 Interface
•Available with SC, ST, LC multimode and
single mode fiber connections
•Wake-on-LAN (WoL)
•Supports 802.1q VLAN tagging
100Base-FX Fiber Adapter NIC is a Fast Ethernet NIC that fully complies with all IEEE
802.3u and 100Base-FX standards. Two LED indicators
(LINK/ACT and FDX)
on the
bracket will help to oversee board link activities and full-duplex status.
Fast Ethernet PCI-E 100Base-FX Fiber adapters support Preboot Execution Environment
(PXE), Remote Program Load (RPL), and Bootstrap Protocol (BOOTP). Multi-Boot
Agent (MBA) is a software module that allows your networked system to boot with the
images provided by remote systems across the network.
*Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.
Installation . . . . . . . . . . . . . . . . . . .2
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . .7
Part Number
Fiber Port
N-FXE-ST-01
S
T 1310 nm multimode, 2km
(1.2 miles)
std/low profile bkt
PXE boot included
*
N-FXE-SC-01
SC, 1310 nm multimode, 2km
(1.2 miles)
std/low profile bkt
PXE boot included
*
N-FXE-LC-01
LC, 1310 nm multimode, 2km
(1.2 miles)
std/low profile bkt
PXE boot included*
N-FXE-SC5-01
SC, 1310 nm single mode, 5km
(3.1 miles)
std/low profile bkt
PXE boot included*
N-FXE-LC5-01
SC, 1310 nm silngle mode, 5km
(3.1 miles)
std/low profile bkt
PXE boot included*
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Checklist Before installing the Fast Ethernet N-FXE Series 100Base-FX Fiber NIC, verify thatthe package contains the following items: • Fast Ethernet N-FXE Series 100Base-FX Fiber NIC • LAN Driver and User’s Guide CD-ROM Please notify your sales representative immediately if any of the ...
N-FXE Series Fast Ethernet NICs 4 Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours Cable Specifications Fiber cable Bit error rate: <10-9 Single mode fiber (recommended) : 9 µm Multimode fiber (recommended) : 62.5/125 µm Multimode fiber (optional) : 100/140, 85/140, 50/125 ...
N-FXE Series Fast Ethernet NICs 6 Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours Troubleshooting Diagnostics LEDs and Boot ROM LEDs Declaration of Conformity Name of Mfg: Transition Networks, 10900 Red Circle Drive,Minnetonka, MN 55343 U.S.A. Model: N-FXE-xxx-01 Network Inte...
