Transition Networks J/FE-CF-03 - Manual
Transition Networks J/FE-CF-03 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Options Accessories; Installation; Installing the Cable; Fiber; Set the Two-Position Switch; Copper
- Page 3 – Power the media converter; Operation; Using status LEDs
- Page 4 – Cable Specifications; Fiber cable; Technical Specifications
- Page 5 – Troubleshooting; Is the Power LED on the media converter illuminated?; Is the; Contact Us; Technical support
- Page 6 – Declaration Of Conformity; Compliance Information; FCC Regulations
USER’S GUIDE
J/FE-CF-03
Stand-Alone media converter
•
Fast Ethernet™
• Copper to Fiber
• 100Base-TX to 100Base-FX
Transition Networks J/FE-CF-03 Fast
Ethernet™ media converter connects 100
Mb/s twisted-pair copper cable to a duplex
100 Mb/s fiber-optic cable.
Use the J/FE-CF-03 series media converter
(or up to two media converters in series)
to extend over fiber, the distance between two 100BASE-TX devices
(hub, switch,
workstation, etc.).
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
J/FE-CF-03
RJ-45, 100Base-TX
100 m
(328 ft)
*
ST, 100Base-FX, 1300 nm multimode
2 km
(1.2 miles)
*
J/FE-CF-03(SC)
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC , 100Base-FX, 1300 nm multimode
2 km
(1.2 miles)
*
J/FE-CF-03(SM)
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 100Base-FX, 1300 nm singlemode
20 km
(12.4 miles)
*
J/FE-CF-03(LH)
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 100Base-FX, 1300 nm singlemode
40 km
(24.9 miles)
*
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
J/FE-CF-03-100
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 1310 mn TX/1550 nm RX, 20 km
(12.4 miles)
*
J/FE-CF-03-101
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 1550 mn TX/1310 nm RX, 20 km
(12.4 miles)
*
*Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.
Note:
Install the J/FE-CF-03-100 and the J/FE-CF-03-101 in the same network as local
and remote peers.
Installation . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . . . .6
Technical Specifications . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . .8
Contact Us . . . . . . . . . . . . . . . . . . . . .9
Compliance Information . . . . . . . . .11
Single Fiber Optic
(install as a pair)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 J/FE-CF-03 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Part Number Description WMBS Optional Wall Mount BracketsLength: 3.2 in. (81 mm) , Fits converter length: 3.9 in. (99 mm) SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone Wide-Input;Output: 12....
4 J/FE-CF-03 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Power the media converter AC power: 1. Install the power adapter cord to the back of the media converter. 2. Connect the power adapter plug to AC power. 3. Verify that the media conve...
Cable Specifications The physical characteristics must meet or exceed IEEE 802.3™ specifications. Fiber cable Bit Error Rate: <10-9 Singlemode fiber (recommended) : 9 μm Multimode fiber (recommended) : 62.5/125 μm Multimode fiber (optional) : 100/140, 85/140, 50/125 μm J/FE-CF-03 1300 nm multimod...
