Transition Networks E-TBT-MC04 - Manual
Transition Networks E-TBT-MC04 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – General Description; Dimensions; Connectors and Cables
- Page 4 – Installation; Switches; Link test; Connecting to a Device AUI port
- Page 5 – Operations; LEDs; LED; Technical Specifications
- Page 6 – Cable Specifications; Copper cables; Troubleshooting; Technical support
- Page 7 – Compliance Information; CE Mark
E-TBT-MC04 10Base-T
Transceiver
•
Stand-Alone model
•
Attached Unit Interface (AUI) to
Ethernet RJ-45 connectors
•
No external power requirement
General Description . . . . . . . . .2
Connectors & Cables . . . . . . . .3
Installation . . . . . . . . . . . . . . . . .6
Operations . . . . . . . . . . . . . . . .8
Technical Specifications . . . . . . .9
Cable Specifications . . . . . . . . .10
Troubleshooting . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . .11
The E-TBT-MC04 transceiver is a media access
unit (MAU) that connects the AUI port of data
terminal equipment, repeaters, or other network
devices either directly or through an AUI cable to an Ethernet 10BASE-T device. The
Ethernet device is connected to the transceiver through an unshielded or shielded
twisted-pair copper cable with RJ-45 connector ends.
Workstation
E-TBT-MCO4
E-TBT-MCO4
Workstation
10-Base-T Hub
E-TBT-MCO4
HUB with AUI Port
Or
Or
Various Transceiver System Configurations
Figure 1 shows various examples of transceiver system configurations.
Figure 1: Transceiver System Configurations
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
E-TBT-MC04 2 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 General Description The E-TBT-MC04, IEEE802.3 compliant Ethernet transceiver uses 10Mbps EthernetCSMA/CD protocol to provide a connection interface to 10Base-T Ethernet unshieldedtwisted-pair (UTP) cables. The...
6 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation Switches The E-TBT-MC04 has a 3-position DIP switch. See Figure 6. Two of the switchesprovide options for enabling and disabling the SQE test and LINK test functions. Bothtest functions are Ethernet and 10Ba...
E-TBT-MC04 8 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operations LEDs Figure 9 shows the E-TBT-MC04 LEDs: The E-TBT-MC04 LEDs display the operational status of the transceiver. Thefollowing table explains LED indications. Figure 9: E-TBT-MC04 LEDs Status Collisio...
