Page 2 - Instructions; General safety instructions; Risk of personal injury
Instructions 4 1 Instructions 1.1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Never touch the heating elements during use. • Keep children under eight years of age at a safe distance if they are not constantly supervised....
Page 3 - Risk of damaging the appliance; Identification plate; • The identification plate bears the; Manufacturer liability; • non-observance of the user manual
Instructions 5 EN • WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR IN CARAVANS, IT SHALL NOT BE USED AS A SPACE HEATER. • Do not use or store flammable materials in the appliance storage drawer or near the appliance. Risk of damaging the appliance • Do not use abrasive or corrosive detergents ...
Page 4 - Appliance purpose; • This appliance is intended for cooking; How to read the user manual
Instructions 6 1.4 Appliance purpose • This appliance is intended for cooking food in the home environment. Every other use is considered improper. • The appliance is not designed to operate with external timers or with remote-control systems. 1.5 This user manual This user manual is an integral par...
Page 5 - Description; General Description
Description 7 EN 2 Description 2.1 General Description 1 Backguard 2 Cooktop 3 Control panel 4 Oven light 5 Seal 6 Door 7 Fan 8 Gas oven 9 Storage compartment Rack/tray support frame shelf
Page 6 - Minute minder timer knob
Description 8 2.2 Cooktop AUX = AuxiliarySR = Semi-rapid R = RapidUR2 = Ultra rapid 2.3 Control panel 1 Minute minder timer knob In order to use the minute minder timer, the buzzer must be set by turning the knob clockwise. The numbers correspond to minutes (maximum 120 minutes). Adjustment is progr...
Page 7 - Available accessories
Description 9 EN 4 Gas oven knob This turns the lower burner on. The cooking temperature is selected by turning the knob anticlockwise to the required setting, between MIN and MAX . 5 Cooktop burner knobs Useful for lighting and adjusting the cooktop burners.Press and turn the knobs anti-clockwise t...
Page 8 - Useful for cleaning the Teppanyaki plate.
Description 10 Teppanyaki plate (on some models only) Useful for cooking meat, fish and vegetables directly on the plate without adding fats or oils, staying true to the tradition of Japanese cuisine that seeks to exalt the natural flavours and aromas of food ensuring light nourishment while preserv...
Page 9 - Use; Danger of burns
Use 11 EN 3 Use 3.1 Instructions High temperature inside the oven during use Danger of burns • Keep the oven door closed during cooking. • Protect your hands wearing heat resistant gloves when moving food inside the oven. • Do not touch the heating elements inside the oven. • Do not pour water direc...
Page 10 - Escaping gas may cause an explosion.
Use 12 Escaping gas may cause an explosion. If you smell gas or notice any faults in the gas installation:• Immediately shut off the gas supply or close the gas cylinder valve. • Immediately extinguish all naked flames and cigarettes. • Do not use any light or appliance switches and do not pull any ...
Page 11 - Using the accessories; Ring reducers
Use 13 EN 3.3 Using the accessories Using the Teppanyaki plate (on some models only) • The burners under the plate can be lit at the same time to the maximum setting for no more than 10 minutes . After this time they should be set at the minimum setting. • After use, the burners must be turned off a...
Page 12 - Tray rack; Using the cooktop; and wait 60 seconds before trying
Use 14 Tray rack The tray rack has to be inserted into the tray. In this way fat can be collected separately from the food which is being cooked. Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop.• The mechanical safety locks that prevent the...
Page 13 - in the flame-spreader crowns
Use 15 EN Correct positioning of the flame-spreader crowns and burner caps Before lighting the cooktop burners, make sure that the flame-spreader crowns are correctly positioned in their housings with their respective burner caps. Make sure that the holes 1 in the flame-spreader crowns are aligned w...
Page 14 - Using the gas oven
Use 16 3.5 Using the oven Using the gas oven Electronic spark ignition:1. Open the oven door completely.2. Press and turn the gas oven knob anticlockwise to a position between MIN and MAX . The electric spark ignition is activated automatically. 3. After lighting, keep the knob pressed in for a few ...
Page 15 - Checking the power supply
Use 17 EN Checking the power supply Before manually lighting the gas oven burner, you must check that the power supply is present.After connecting the appliance to the mains power supply, perform one of the following methods: • Turn the timer knob to the lamp position to switch on the oven light. OR...
Page 16 - Functions list
Use 18 Functions list 3.6 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for c...
Page 17 - Advice for defrosting; Using the storage compartment
Use 19 EN Advice for cooking with the Grill and the Fan with grill • Meat can be grilled even when it is put into the cold oven or into the preheated oven if you wish to change the effect of the cooking. • With the Fan with grill function, we recommend that you preheat the oven before grilling. • We...
Page 18 - Cooking information table
Use 20 Cooking information table Food Weight (Kg) Runner position from the bottom Static Oven Fan-assisted Oven Temperature (°C) Time (minutes) Temperature (°C) Time (minutes) Lasagne 3 3 230 - 240 50 - 60 230 - 240 45 - 50 Cannelloni 2.5 2 220 - 230 25 - 30 220 - 230 25 - 30 Pasta bake 2.5 2 220 - ...
Page 19 - Cleaning and maintenance; Cleaning the appliance; Cleaning the cooktop
Cleaning and maintenance 21 EN 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the appliance Recommendations for cleaning the cooktop To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Cleaning the cooktop 1. Pour some non-abrasive deter...
Page 20 - Cleaning the igniters and thermocouples; Removing the door
Cleaning and maintenance 22 Teppanyaki plate (on some models only) The Teppanyaki plate is easier to clean when it is still lukewarm.Use conventional specific detergents for stainless steel and non-abrasive sponges. Any remaining encrustations or food residues can be easily removed by soaking the pl...
Page 21 - Grasp the door on both sides with both; Cleaning the door glazing; Some models have an intermediate glass
Cleaning and maintenance 23 EN 2. Grasp the door on both sides with both hands, lift it forming an angle of around 30° and remove it. 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely in the slots. Lower the door a...
Page 22 - Removing racks/trays support frames
Cleaning and maintenance 24 4. Clean the external glass pane and the panes previously removed. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and neutral detergent. 5. Refit the panes in the reverse order in which they were removed. 6. Reposition the internal glass pan...
Page 23 - Extraordinary maintenance; Replacing the oven light bulb
Cleaning and maintenance 25 EN 4.6 Extraordinary maintenance Replacing the oven light bulb 1. Completely remove all accessories from inside the oven. 2. Remove the racks/trays support frames. 3. Remove the bulb cover using a tool (e.g. a screwdriver). 4. Slide out and remove the light bulb. 5. Fit t...
Page 24 - Removing and installing the oven seal
Cleaning and maintenance 26 Removing and installing the oven seal To remove the oven seal:• Unhook the clips in the 4 corners and in the centre, then pull the oven seal. To install the oven seal:• Hook the clips in the 4 corners and in the centre onto the oven seal. Oven seal maintenance tips The se...
Page 25 - Installation; Clearances above and around domestic appliances; Requirements
Installation 27 EN 5 Installation 5.1 Clearances above and around domestic appliances This appliance must be installed by an authorised person in accordance with this instruction manual, AS/NZS 5601.1 – Gas installations (installation and pipe sizing), local gas fitting regulations, local electrical...
Page 26 - Additional requirements for
Installation 28 3. Additional requirements for Freestanding and Elevated Cooking Appliaces – (Measurements D & E) Where D, the distance from the periphery of the nearest burner to a horizontal combustible surface is less than 200 mm, then E shall be 10 mm or more, or the horizontal surface shall...
Page 28 - The regulator supplied must be fitted
Installation 30 N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0kPa after installation. U.L.P.G. Can be connected to the inlet fitting directly. The...
Page 29 - Combustion gas discharge; Adaptation to different types of; Replacing nozzles
Installation 31 EN Combustion gas discharge Combustion gases may be discharged by means of hoods connected to a flue with reliable natural draught, or a fan extraction system. An effective extraction system requires careful design by an authorised specialist, and must comply with the regulation dist...
Page 30 - Replacing the oven burner nozzle
Installation 32 Replacing the oven burner nozzle 1. Open the oven door and remove all of the accessories from inside the oven. 2. Remove the shelf. 3. Remove the oven burner fastening screws from the base. 4. Lift the burner at the side and pull it towards you to remove it from its seat. 5. Replace ...
Page 31 - Slide off the knob and insert a straight
Installation 33 EN Adjusting the minimum setting for natural gas Light the burner and turn it to the minimum position. Extract the gas cock knob and turn the adjustment screw next to the tap rod (depending on the model) until the correct minimum flame is achieved.Refit the knob and verify that the b...
Page 32 - Adjusting the minimum setting for LPG
Installation 34 Adjusting the minimum setting for LPG Tighten the screw located at the side of the tap rod clockwise all the way. Lubricating the gas cocks Over time the gas taps may become difficult to turn and get blocked. Clean them internally and replace the lubrication grease. Burner and nozzle...
Page 33 - Overall dimensions
Installation 35 EN Overall dimensions Location of gas and electrical connection points. 5.4 Positioning A 40 mm B 618 mm C 124 mm D 12 mm Heavy appliance Danger of crush injuries • Place the appliance into the piece of furniture with the aid of a second person. Pressure on the open door Risk of dama...
Page 34 - General information
Installation 36 General information This appliance may be installed next to walls, one of which must be higher than the worktop, at a minimum distance of 50 mm from the side of the appliance, as shown in figures A and C relative to the installation classes.Any wall units positioned above the worktop...
Page 35 - Positioning and levelling
Installation 37 EN Positioning and levelling • After making the gas and electrical connections, screw on the four feet supplied with the appliance. The appliance must sit level on the floor to ensure stability.• Screw or unscrew the bottom part of the foot until the appliance is stable and level on ...
Page 36 - Fastening to the wall
Installation 38 Fastening to the wall 1. Screw the wall fastening plate to the rear of the appliance. 2. Adjust the height of the 4 feet. 3. Assemble the fastening bracket. 4. Align the base of the hook on the fastening bracket with the base of the slot on the wall fastening plate. The anti-tip devi...
Page 38 - Wall fixing
Installation 40 Wall fixing 1. Turn the screw placed behind the cooktop near the gas connection. 2. Attach the chain to the cooker with the screw just removed. 3. Stretch it out horizontally so that the other end of the chain touches the wall. 4. Mark the wall in the position where the hole is to be...
Page 39 - Electrical connection
Installation 41 EN 5.5 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for any reason.Per...
Page 40 - For the installer
Installation 42 5.6 For the installer • The plug must remain accessible after the installation is complete. Do not kink or trap the mains connection cable. • The appliance must be fitted according to the installation diagrams. • Do not attempt to turn or stress the threaded elbow on the manifold. Yo...
