Smeg ALFA625H - User Manual

Instructions 30 • Deliver the appliance to the appropriate recycling centre for electrical and electronic equipment waste, or return it to the retailer when purchasing an equivalent product, on a one for one basis. Our appliances are packaged in non-polluting and recyclable materials.• Deliver the p...

Description 31 EN 2 Description 2.1 General Description 1 Control panel 2 Oven lights 3 Seal 4 Door 5 Fans 6 Tray support frames 7 Water intake line Frame shelf

Description 32 2.2 Control panel 1 Temperature knob This knob allows you to select the cooking temperature.Turn the knob clockwise to the required value, between the minimum and maximum setting. 2 Thermostat indicator light When the indicator light is fixed, it indicates that the oven is heating up ...

Description 33 EN 2.3 Other parts Shelves The appliance features shelves to position trays and racks at different heights. The insertion heights are indicated from the bottom upwards (see 2.1 General Description). Internal ventilation When the door is opened, oven ventilation is automatically switch...

Use 34 3 Use 3.1 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (if fitted) (see 4 C...

Use 35 EN 3.3 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat ...

Cleaning and maintenance 36 4 Cleaning and maintenance 4.1 Cleaning the appliance Recommendations for cleaning the appliance To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Ordinary daily cleaning Always use only specific products that do not ...

Cleaning and maintenance 37 EN 3. Open the internal glass pane. 4. Clean both the interior and exterior of the glass panes. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and neutral detergent. 5. After cleaning, close the internal glass pane again. 6. Reposition the u...

Cleaning and maintenance 38 Removing the tray support frames Removing the tray support frames enables the sides to be cleaned more easily.1. Unscrew the fastening ring nuts completely. 2. Remove the tray support frames from their seats on the deflector and remove them from the oven. 3. When you have...

Cleaning and maintenance 39 EN Replacing the internal light bulb 1. Completely remove all accessories from inside the oven. 2. Remove the rack/tray support frames. 3. Remove the bulb cover using a tool (e.g. a screwdriver). 4. Slide out and remove the light bulb. 5. Fit the new light bulb. 6. Refit ...

Cleaning and maintenance 40 4.5 If the appliance is not working properly This product meets current safety regulations for electrical appliances. To prevent safety hazards for users, all technical inspections or repairs must be carried out by qualified personnel. Regular Maintenance • The appliance ...

Installation 41 EN 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate f...

Installation 42 Avoid using adapters and shunts as these could cause overheating and a risk of burns. (Example of 32A plug and socket) Cable replacement 1. At the back of the appliance, unscrew the 4 screws to remove the metal cover of the terminal board. 2. Use a flat-head screwdriver to unhook and...

Installation 43 EN 5.2 Water connection Connect the water inlet socket on the back of the appliance to a water socket with a threaded ¾” opening. 5.3 Positioning Levelling Level the appliance on the ground using the adjustable feet. The foot has a range of 10 mm. Improper use Risk of damage to the a...

Installation 44 Steam outlet pipe Depending on the model, there is an exhaust flue on the back of the appliance to release the steam produced during cooking. Multiple installations Place the appliance at a distance of at least 50 mm from any back wall and at 30 mm from any side wall. Keep a minimum ...

Installation 45 EN High food temperature Danger of burns • For safety reasons, DO NOT position the uppermost tray at a height above 160 cm. • If necessary, it is MANDATORY to apply the supplied adhesive label at the height indicated in the figure below.