Shark ZU81 User Manual - Free PDF Download

Page 2 - WARNING; IMPORTANT SAFETY INSTRUCTIONS; FOR HOUSEHOLD USE ONLY; SAVE THESE INSTRUCTIONS

s h a r k c l e a n . c o m s h a r k c l e a n . c o m READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM 1. Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store you...

Page 3 - ASSEMBLY; UPPER CORD HOOK

s h a r k c l e a n . c o m s h a r k c l e a n . c o m ASSEMBLY ASSEMBLY 1. Insert Wand into Pod . 2. Insert Handle into wand. 3. Attach Hose to back of pod. 4. Attach hose to Clip on wand. 5. Insert Hose Clip onto base of pod and remove tape. 6. Store Accessories on tool storage posts. 7. Remove O...

Page 4 - ODOR NEUTRALIZER TECHNOLOGY; Odor Dial Must be Installed for Vacuum to Function Properly

s h a r k c l e a n . c o m s h a r k c l e a n . c o m ODOR NEUTRALIZER TECHNOLOGY ODOR CARTRIDGE REPL ACEMENT TECHNOLOGY SETTINGS ODOR NEUTRALIZER TECHNOLOGY TIPS SETTINGS Flip up the dial handle and rotate the odor dial to adjust odor neutralizer technology intensity or to unlock the dial for car...

Page 5 - CLEANING MODES; Wand Release; SETTINGS; FPO

s h a r k c l e a n . c o m s h a r k c l e a n . c o m NOTE: All accessories are compatible with both the wand and the handle. NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to MAX suction and use setting II , Carpet . WHOLE-HOME CLEANING CLEANING MODES To engage brush...

Page 6 - EMPTYING THE DUST CUP; CLEAN HEPA FILTER; CLEANING AND REPLACING THE FILTERS; REPLACING FILTERS

s h a r k c l e a n . c o m s h a r k c l e a n . c o m EMPTYING THE DUST CUP To remove Dust Cup , slide up the latch on top of dust cup handle. Tilt dust cup forward, then lift to remove. To reinstall, place bottom of dust cup into pod and then tilt back until it clicks into place. Press lower rele...

Page 7 - CHECKING FOR BLOCKAGES; MAINTENANCE; DEBRIS WR APPED; NOZZLE MAINTENANCE; CORD MAINTENANCE; NOZZLE HOSE BLOCK AGE

s h a r k c l e a n . c o m s h a r k c l e a n . c o m CHECKING FOR BLOCKAGES Detach hose from vacuum pod, and check hose and opening on back of pod for blockages. Detach wand from floor nozzle and handle, and check both ends for blockages. Detach the wand from the pod, place the pod on its side, a...

Page 8 - TROUBLESHOOTING; Vacuum turns off on its own or indicator light flashes red.; AVAILABLE ACCESSORIES

s h a r k c l e a n . c o m s h a r k c l e a n . c o m TROUBLESHOOTING Vacuum is not picking up debris. No suction or light suction.• Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinserting in the vacuum. • Dust cup may be full; empt...

Page 9 - TECHNICAL SPECIFICATIONS

s h a r k c l e a n . c o m s h a r k c l e a n . c o m TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the vacuum pod. Benefits of registering your product and creating an account:• Get easier, faster product support and access to warranty informatio...