Philips AC2958/53 - Quick Guide

Philips AC2958/53

A user manual for the Philips Mars LE AC2958/2959 air purifier covers its core functionalities, including remote operation via a smartphone app or physical controls, real-time air quality monitoring (PM2.5 and IAI indicators), and smart connectivity features like Wi-Fi integration. The guide also addresses essential maintenance tasks–such as filter care for the NanoProtect Series 3–using visual alerts on the display to signal when cleaning or replacement is needed. Safety and operational modes, including automatic, turbo, eco, and sleep settings, are also addressed within its scope.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
Page: / 5

Table of Contents:

  • Page 1 – Device Operation and Maintenance Controls
  • Page 2 – Control Panel Functions and Filter Status
  • Page 3 – Air Quality Modes and Filter Replacement
  • Page 4 – Filter Management and Connectivity
  • Page 5 – Full System Operation and Maintenance Overview
Loading the manual
Page 1

Mars LE AC2958/2959 DI CEE_EN 90x127mm

Connectivity

You can use the app to control the purifier and check air quality. Download and install the Philips app

Clean Home+

Open the app and click on "Connect a New Device" or press the "+" button to connect your device. Please follow the steps in the app.

Control

Power Filter status/ reset Display switch Mode switch Light on/off

Hold for 3 seconds to turn off the purifier

IAI PM2.5

Auto Turbo Gentle Sleep

Display

Auto mode Turbo mode Gentle mode Sleep mode

Wi-Fi indicator Filter cleaning alert Filter replacement alert

IAI PM2.5 888 Air quality light

Indoor allergen index PM2.5 indicator 3-digit display PM2.5 / IAI Air quality light

Allergen index 1-12, 1 indicates best air quality

Good Fair Poor Very poor

Maintenance

NanoProtect filter Series 3 (FY2180/30)

When display shows

10 Time to clean the NanoProtect filter Series 3

When display shows

10 Time to replace the NanoProtect filter Series 3

Press to check filter lifetime status.

Press for 3 seconds to reset after cleaning or replacing filter.

The filter may produce smell after being used for a while because of the absorption of indoor air. Remove the filter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the filter.

3000 048 96041-1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand
Philips
Model
AC2958/53
Document type
Quick Guide
Language(s)
English, Polish, Russian
Pages
5
File size
2.8 MB
Format
PDF

Other Manuals for Philips AC2958/53

Summary

Page 1 - Device Operation and Maintenance Controls

Instructions for operating the unit using physical buttons or the Clean Home+ app, interpreting display information including modes, Wi-Fi status, filter alerts, and air quality indicators (IAI and PM2.5), and performing filter maintenance based on visual alerts.

Page 2 - Control Panel Functions and Filter Status

Guidance on operating the device via the control panel and display, managing Wi-Fi connectivity, monitoring filter status, and interpreting air quality indicators (IAI and PM2.5). Details on maintaining the filter and determining when to clean or replace the NanoProtect Series 3 filter.

Page 3 - Air Quality Modes and Filter Replacement

Operation modes including automatic, turbo, and sleep, air quality indicators for PM2.5 and allergens, and procedures for checking filter lifespan and replacing the NanoProtect filter based on display indicators.

Tips

  • Regularly check the filter status using the dedicated button to maintain optimal performance.
  • If the filter develops an odor, place it in direct sunlight with good ventilation for several hours.
  • Always reset the filter timer after cleaning or replacement by holding the button for 3 seconds.
  • Use the Philips Clean Home+ app for remote control and real-time air quality monitoring.

Ask a question

Up to 3 photos. Max 5 MB each. Formats: JPG, JPEG, PNG, WebP.

Related manuals

Popular Philips Other

More Philips Other models