Husqvarna SC18/968981201 - Manual

Husqvarna SC18/968981201

Husqvarna SC18/968981201 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 3 – FEATURES AND CONTROLS; Oil used in the Clutch/Gear Box
  • Page 4 – OPERATING INSTRUCTIONS; GENERAL INFORMATION; equipment or property damage.; OPERATOR’S TIPS
  • Page 5 – Please be aware that when operating on hills, you may experience:; BEFORE YOU START; See Figure
  • Page 6 – SAFTEY AND MAINTENANCE
  • Page 7 – SERVICE AND MAINTENANCE; BLADE WEAR
  • Page 8 – TROUBLESHOOTING; PROBLEM
  • Page 12 – SOUND AND VIBRATION STATMENT
  • Page 13 – This page left black intentionally
Loading the manual

Operators manual

SC18/968981201
SC18/968999352

Models:

Please read these instructions carefully and make
sure you understand them before using the machine.

MANUAL NO. 540200156 REV. 01 (12/01/05)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - FEATURES AND CONTROLS; Oil used in the Clutch/Gear Box

3 FEATURES AND CONTROLS Oil used in the engine (gray cap) 1. Refer to your engine manual for oil type, viscosity, weight and capacity. Oil used in the Clutch/Gear Box 1. Refer to your engine manual for oil type, viscosity, weight and capacity. Reducer (yellow cap) Transmission grease used 1. You sho...

Page 4 - OPERATING INSTRUCTIONS; GENERAL INFORMATION; equipment or property damage.; OPERATOR’S TIPS

4 OPERATING INSTRUCTIONS GENERAL INFORMATION This manual will assist you in the safe operation and proper maintenance of your Husqvarna equip-ment. Read it thoroughly before attempting to operate the machine. Do not hesitate to call yourdealer or Husqvarna if additional information is required. The ...

Page 5 - Please be aware that when operating on hills, you may experience:; BEFORE YOU START; See Figure

5 OPERATING INSTRUCTIONS • Do not attempt sharp turns while cutting.• Should I water before cutting?It is usually not necessary to water before cutting. In extreme conditions, such as clay soil that isvery compacted, a simple test as follows will determine if you need to water before cutting. Use ag...

Other Husqvarna Models