Husqvarna AUTOMOWER 520H - User Manual

2 Introduction Serial number: Product number: PIN code: The serial number and the product number are on the product rating plate and on the product carton.• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and the date of purchase to register you...

2.8 Overview of the settings structure in Automower ® Connect (1) Operation Cutting time Low High Intensity Weather timer Spiral cutting Cutting height ECO mode Medium Low High Medium Very low Very high Schedule Edit Overview Schedule settings Change current Schedule settings Add new Schedule settin...

2.9 Overview of the settings structure Automower ® Connect (2) Installation Find charging station Drive past wire Reversing distance Exit angles Corridor width Lawn coverage Charging station signal Follow boundary wire Follow guide 1/2/3 GPS assisted navigation (default) Area 1/2/3/4/5 How often Bou...

2.10 Overview of the settings structure in Automower ® Connect (3) (Bluetooth ® short-range connectivity only) General Security Create new loop signal New loop signal GeoFence Change PIN code Theft protection Time lock Require PIN code Alarm STOP button pressed Carried away Time & date Reset to ...

3 Installation 3.1 Introduction - Installation WARNING: Read and understand the safety chapter before you install the product. CAUTION: Use original spare parts and installation material. Note: Refer to www.husqvarna.com for more information about installation. Automower ® 550H has the Automower ® C...

B A Note: The product must be manually moved between the main area and the secondary area. • Put the boundary wire around the secondary area (B) to make an island. Refer to To make an island on page 16. Note: The boundary wire must be put as 1 loop around all of the work area (A + B). Note: When the...

B D C A 3.4.6 Automower ® Club Solution Automower ® Club Solution makes it possible to use 2 or 3 products in one installation. It requires special configuration in the product and the installation of the boundary wires and charging stations is different. To use Automower ® Club Solution, speak to y...

For more information about the operating modes Start, Park and Pause, refer to Operation on page 30. 3.10.4 Account In this menu there is an overview of the account settings and you can log off from the app. 3.10.4.1 To set the unit format1. Select the unit format Metric or Imperial. 3.10.5 My mower...

4 Settings The product has factory settings but the settings can be adapted to each work area. 4.1 Schedule In Schedule you can change the schedule settings for the product.The schedule function controls which hours the product should operate and not operate. When the product is not operating it is ...

4. Wait for confirmation that the loop signal has been generated. This usually takes about 10 seconds. 4.7.2 To change the PIN code 1. Select Security > Change PIN code in the app. 2. Enter the PIN code. 3. Enter the new PIN code. 4. Enter the new PIN code to confirm. 5. Make a note of the new PI...

5 Operation 5.1 Main switch WARNING: Read and understand the safety chapter before you use the product. • Set the Main switch to the 1 position to start the product. • Set the Main switch to the 0 position to set the product to OFF. 5.2 Start 1. Set the Main switch to the 1 position. 2. Open the Aut...

6 Maintenance 6.1 Introduction - maintenance WARNING: Set the product to OFF before you do maintenance on the product. WARNING: Use protective gloves. For better operation and lifetime of the product, make sure to clean the product regularly and replace worn parts.When the product is new, examine th...

To prepare Weekly Every year Every third year Examine the rubber grommets on the chassis to make sure that it is sealed correctly. O Examine the skid plate and skid plate bearing. O Examine the rubber bellows in the cutting height adjustment system. O Examine the rubber bellows for the collision col...

7 Troubleshooting 7.1 Introduction - troubleshooting All messages can be found in the Messages menu in Automower ® Connect. More suggestions for steps to take in the event of malfunction or symptoms can be found on www.husqvarna.com. Note: The Messages menu is only available for short-range connecti...

7.3 Information messages The list below shows a number of information messages that may be found in the Messages menu in the Automower ® Connect app. Contact your local Husqvarna representative if the same message appears often. Message Cause Action Low battery The product cannot find the charging s...

Symptoms Cause Action The product turns round and stays on a small area for several minutes. This is completely normal for the product. The product have GPS assisted navigation that contributes to an even result. No action. Uneven mowing re- sults. The product works too few hours per day. Increase t...

8 Transportation, storage and disposal 8.1 Transportation The supplied Li-ion batteries obey the Dangerous Goods Legislation requirements.• Obey all applicable national regulations. • Obey the special requirement on package and labels for commercial transportations, including by third parties and fo...

9 Technical data 9.1 Technical data Dimensions Automower ® 520H Automower ® 550H Length, cm / in. 75 / 29.5 75 / 29.5 Width, cm / in. 63 / 24.8 63 / 24.8 Height, cm / in. 33 / 13 33 / 13 Weight, kg / lb 14.7 / 32.4 14.4 / 31.7 Electrical system Automower ® 520H Automower ® 550H Battery, Lithium-Ion ...

Power Class Bluetooth ® Output power 8 dBM Automower ® Connect 2G Power Class 4 (GSM/E-GSM) 33 dBm Power Class 1 (DCS/PCS) 30 dBm Power Class E2 (GSM/E-GSM) 27 dBm Power Class E2 (DCS/PCS) 26 dBm Automower ® Connect 4G Power Class 3 23 dBm Full compatibility cannot be guaranteed between the product ...

10 Applicable to US/CA market 10.1 Supplier's Declaration of Conformity HUSQVARNA AUTOMOWER ® 520H/550H Responsible party: Husqvarna Consumer Outdoor Products N.A., Inc, 8825 Statesville Road, Charlotte, NC 28269, Tel: +1 704 597 5000, www.husqvarna.com/us/ support/e-mail/. 10.2 Compliance requireme...