Page 2 - SAFETY RULES; Safe Operation Practices for Ride-On Mowers; WARNING
2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand, and follow all...
Page 4 - TABLE OF CONTENTS; PRODUCT SPECIFICATIONS; CUSTOMER RESPONSIBILITIES
4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICATIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBLY ................................................................. 5-6 OPERATION ..........
Page 5 - UNASSEMBLED PARTS; Slope Sheet; ASSEMBLY; TO REMOVE TRACTOR FROM CARTON; UNPACK CARTON; BEFORE REMOVING TRACTOR FROM
5 UNASSEMBLED PARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. ADJUST SEAT (See Fig. 2) • Sit in seat.• Lift up adjustment lever (A) and slide seat until a com- fort...
Page 6 - CHECKLIST
6 ASSEMBLY CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.• Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be proper...
Page 7 - OPERATION
7 OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW EN...
Page 8 - KNOW YOUR TRACTOR
8 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Our tractors conform to the appli...
Page 9 - HOW TO USE YOUR TRAC TOR
9 OPERATION Fig. 5 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or ...
Page 10 - TO MOVE FORWARD AND BACKWARD
10 OPERATION Fig. 9 TO ADJUST GAUGE WHEELS (See Fig. 9) Gauge wheels are prop er ly ad just ed when they are slight ly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditi...
Page 11 - TOWING CARTS AND OTHER AT TACH MENTS; TO OPERATE ON HILLS; TO STOP MOWER BLADES
11 S Fig. 10 OPERATION Fig. 11 TOWING CARTS AND OTHER AT TACH MENTS Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with t...
Page 12 - ADD GASOLINE; BEFORE STARTING THE ENGINE; CHECK ENGINE OIL LEVEL
12 CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to sep a ra tion and for ma tion of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied ...
Page 13 - MOWING TIPS; PURGE TRANSMISSION
13 Fig. 12 MOWING TIPS • Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trim- ming. • Drive so that clippings are discharged onto the area that has been...
Page 14 - GENERAL RECOMMENDATIONS; BEFORE EACH USE; MAINTENANCE
14 02956 ➀ General Purpose Grease ➁ Refer to Maintenance “ENGINE” Section ➀ SPINDLE ZERK ➀ FRONT WHEEL BEARING ZERK ➁ ENGINE ➀ SPINDLE ZERK ➀ FRONT WHEEL BEARING ZERK ➀ STEERING SECTOR GEAR TETH ➀ Mandrel Zerks T RAC T 0 R 1 - Change more often when operating under a heavy load or in high ambient te...
Page 15 - TRACTOR; BLADE CARE
15 BLADE BLADE BOLT (SPECIAL) CENTER HOLE STAR MANDREL ASSEMBLY TRACTOR Always observe safety rules when per form ing any main te nance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be...
Page 16 - ENGINE
16 MAINTENANCE V-BELTS Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not ad just able. Re place belts if they begin to slip from wear. TRANSAXLE COOLING The transmission fan and cooling fins should be kept clean to assure proper cooling...
Page 17 - MUFFLER; CLEANING
17 MAINTENANCE MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. CLAMP FUEL FILTER Fig. 16 IN-LINE FUEL FILTER (See Fig. 16) The fuel filter should be replaced once each season. If fuel filter becomes clogged, ob struct ing ...
Page 18 - SERVICE AND ADJUSTMENTS
18 WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. • Make sure the blades and all moving parts have completely stopp...
Page 21 - TO LEVEL MOWER
21 FRONT-TO-BACK ADJUSTMENT (See Figs. 34 & 35) IMPORTANT: Deck must be level side-to-side. To obtain the best cutting re sults, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position. CAUTION: Blades are sha...
Page 22 - TO REPLACE MOTION DRIVE BELT
22 Fig. 37 SERVICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 37) Park the tractor on level surface. En gage parking brake. For as sis tance, there is a belt installation guide decal on bottom side of left footrest. V Q P M K L R P Q R R TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 36) MO...
Page 23 - TO START ENGINE WITH A WEAK BATTERY; TO CHECK BRAKE
23 FRONT WHEEL TOE-IN/CAMBER Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center. TO START ENGINE WI...
Page 25 - BATTERY; FUEL SYSTEM; ENGINE OIL; OTHER; STORAGE
25 Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in an...
Page 26 - TROUBLESHOOTING
26 PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Dirty air filter. 5. Clean...
Page 28 - SERVICE NOTES
Page 29 - SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION; WARNING: To avoid serious injury, operate your tractor up and
51 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes great...
